Another Win With The Tekno SCT410 2.0!, Upgrades and Race!

[@johndough8520]

What’s was the part number to the bearing used for the seat bar collars?

[@CrashCourseRC86]

www.horizonhobby.com/product/aluminum-sway-bar-collars-4pcseb-nb-et-nt48-2.0/TKR9090A.html?gad_source=1&gbraid=0AAAAAD_XYFl-vyf9B_LMytXcKnyT8WV9n&gclid=Cj0KCQjwsJO4BhDoARIsADDv4vBa7Q0Rph_3qUNxH2NVD7zwARk0pse7yLneT1-Uj9tExbmVnB2mHwUaAstpEALw_wcB. These should work!

[@johndough8520]

Those are the collars. I need the bearings

[@CrashCourseRC86]

@@johndough8520if I remember right I just used what came with the kit

[@CrashCourseRC86]

@@johndough8520 TKRbb050825. www.horizonhobby.com/product/ball-bearings-5x8x2.5mm-4/TKRBB050825.html?gad_source=1&gbraid=0AAAAAD_XYFl-vyf9B_LMytXcKnyT8WV9n&gclid=Cj0KCQjwsJO4BhDoARIsADDv4vALG5CAI7f5iAuBscec2lzO2Zsybqk8UhLMIcifpYTeRrUKsRUv9NAaAnnjEALw_wcB

[@johndough8520]

Thanks

[@scottdashnaw2345]

Have you upgraded the diffs yet?? Is the plastic cross bar holding up in the diff??

[@CrashCourseRC86]

@@scottdashnaw2345 plastic ones are holding up just fine. The sct410.3 I used to run never let me down with the plastic ones!

[@scottdashnaw2345]

Can you increase the teeth on spur and reduce on pinion to keep temps down?

[@CrashCourseRC86]

Potentially maybe, I’ve never really had to change spur gears to get the speed I wanted… love this Tekno but weight wise it’s almost as much as my 1/8 buggy😂 hard to get up to speed on 2s.

[@Noah-u2z]

Do you think that the sct410sl would be a better option? Much lighter and sure it would get up to speed quicker and keep some heat down? Also would be more competitive? Whatcha think?

[@CrashCourseRC86]

@@Noah-u2z honestly I like my 2.0 better, I have the SL and it is a very capable vehicle though. I did struggle to get the 2.0 up to speed on 2s but think I have that resolved. On larger outdoor tracks I for sure love the 2.0 since it is heavy drives more like my 1/8 buggy and if you get bumped by someone it can take it!!! with the SL also being lighter it parachutes easier and in my experience is not as consistent in the air. I really love them both and don’t think you can go wrong either way. I actually finished my points series with the SL and got 1st in sportsman at our local track. Another point is I have broken the SL a few times but the 2.0 I have not broken anything. I did upgrade the 2.0 right off with aluminum shock caps though but that’s all I have done and it’s been great!

[@Noah-u2z]

@@CrashCourseRC86 awesome! I have been leaning more towards the 2.0 for the same reasons. Or a used .3 from someone. How did ya end up solving getting 2.0 up to speed?

[@CrashCourseRC86]

@@Noah-u2z going to a smaller pinion 18 tooth and put a castle mamba x aluminum case esc. I also had a center diff bearing locking up.

[@scottdashnaw2345]

What’s your lap time on that track??

[@CrashCourseRC86]

Probably consistent 23s or 24s for the most part….. not the greatest 😂 but getting there. I still just run sportsman!