VLAD Ψ BLAD / AVENGER 2 PRO / Review

[@jonnyshiitake]

I've been using the Dan Kubin Sidewinder V2 from Workhorse Irons for a little over a year and I have zero complaints. It's similar to the Avenger 2 Pro in that it's a hybrid (armature bar, sealed rotary motor etc) but it has a dial on the back that easily adjusts stroke length. It's numbered 1-9 (with an * for the middle of the road setting...probably around a 3.5 mm) so it's a little tricky to dial into a measured stroke, but it's incredibly reliable and smooth. If you haven't tried it, I highly recommend it. That being said, I just bought one of these and am stoked to try it out! Great review!

[@AnrijsStraumeTattoo]

Hey, I used to have Kubin too, I think it was V4 or V4.5 , it was good machine. little too hard hitting for me personally. There was adjustment too underneath. I think it wasn't for stroke, more for smoother and harder hit, what could also be little bit stroke , but overall it was still little bit too punchy for me. This machine is much smoother , less noise, less vibration and lighter too. and I think better when the parts were not that exposed. Only thing what I think - it wouldn't be easy to line traditional tattoos all day with this. Let me know what do you think when you get one, would be nice to hear from someone who worked so long with Kubin.

[@tomasdeshi]

I love this machine. I got it during the pre order and have used it daily since. Can’t complain about anything. Super versitile and great quality overall. Been looking to get the critical batteries as well, so it’s nice to see it fits well. Thanks for the video!

[@AnrijsStraumeTattoo]

Thankyou for checking it out and your comment. glad to her you like this machine!

[@ThatTattooGuyOfficial]

Love this machine. So versatile and powerful!

[@AnrijsStraumeTattoo]

Yeah, it really is! great to hear you Love it!

[@jbh269]

I absolutely love this machine, the only downside I found is that covering it makes working less comfortable, adjusting strokes isn’t very comfortable and the bag touches the bar a lot which makes a very loud noise, anyone hate have a tip for that?

[@ivanmendoza8457]

I cover bottom half with a bottle bag when changing stroke I change my gloves and pull down bag honestly I end up setting two machines I rarely change stroke more than once but I agree

[@dudedude4034]

Don’t cover your machine…..Simple as that…..

[@dagger9555]

@@dudedude4034 uhhhhh that’s the entire point of being sanitary in tattooing?

[@dudedude4034]

@@dagger9555 Dude i,m Running my Shop since 1992...I think that I,m competent to say what is ok and what is senseless ... covering tattoo machines & cables ( 😂🤦🏻‍♂️) started few years ago... Reason - just to make a tattooing looks more " clinical "..... There is no logical ( let alone medical ) reason to do that.....

[@dagger9555]

@@dudedude4034 I mean just because you’ve been doing it for so long doesn’t mean you’re right. Just means you have lots of experience doing it wrong. Medical safety changes every day with more knowledge and technology. Your machine is the most in contact with splatter, blood and plasma. It’s far more sanitary to prevent it from getting contaminated than to clean it after. Why not just be more safe and cover it too? Cover your machine bruh

[@mikeharpertattoo4789]

I got my avenger a few weeks ago. Great machine! And another awesome review by you. Want a vladblad pen now as well

[@AnrijsStraumeTattoo]

Thankyou !

[@stabbysean4895]

The VB pens are only ok, avenger 2 is better for sure

[@mikeharpertattoo4789]

@@stabbysean4895 oh really! Glad I got the avenger 2 first then. Might try to get a second hand ultron pen to try

[@tomdeibler3635]

Awesome review. Wasn't sure about using carts with it so now I'm definitely ordering one. Thanks dude🤘🤘

[@E2andros1]

Can you share your experiences using this machines with needle cartridges? And what do you think about the SkinResponse system? I am thinking about buying this machine

[@bostjanloncaric]

Very beautiful machina, for smooth shading must be quite fine, thanks for this, cao

[@AnrijsStraumeTattoo]

Thanktou ! yes, it's smooth, forgot to mention that runs on very low voltages too with nice and delicate hit to it on shorter strokes, and with stronger punch on longer.

[@swmtym]

Stoked that you made a video on this machine. Thanks!

[@AnrijsStraumeTattoo]

Thankyou

[@seitanicgoat3194]

hands down best machine I have had, only minus is the way to have it wrapped, they need to make a plastic mod cover for it to be easier...I haven't found a way to make it look good, I tried the typical machine cover and the armbar touches it and the sound is extremely annoying and it has to be cut to let the armbar free but again, this looks ugly and weird...but machine is super

[@fackeltattoo6666]

I love this Machine 🔥❤ my No.1 in the house

[@AnrijsStraumeTattoo]

That's awesome to hear ! yeah , really cool one.

[@Ledarkmatt_tattoo_shop]

Hello, Thank you for your vidéo, which machine do you use for liner please, 3 7 max 11 Rl, for cartrigises, thank you for your answer, take care 🙌

[@DanielRodrigues-pi6yw]

The axys valhalla also have multi strokes you should give it a try

[@aRiiMunsta]

I tried getting the axys when i first started tattooing, but i guess i had to have experience, and i didn't back then. It still intrigues me as it looked amazing. how has your experience with it has been ?

[@bboytonill]

Hello can you help me I dont know what tattoo machine choice inkjecta x1, cheyenne sol nova unlimited 3.5 or fk irons spectra? All wirless and same price

[@ivanmendoza8457]

The 3rd Avenger wireless is out im gonna order it but if u get it first please review it

[@bullsheeptattoo]

This is definitely a machine to have in the arsenal!

[@wyattsterling3592]

Can someone help when I was adjusting the stroke the nut fell out where it slides I can’t get it back in

[@therealhater9472]

Do you suggest it?

[@da-monti]

Hi Anrijs ! How are you ? Do you try the Avenger 3 ? :)

[@BUKABOOM]

Eh ala you for this review I’m going to buy today this machine y hope work porter full in lines when becomes a RS lines . Cheyene machines are okey for soft jobs or portraits I got very deception when becomes a clean strong lines . :(

[@alquetatuabienlevabien]

Try the wand liner by Bishop 💪

[@MetaDnfT]

How did you get the Mark of the Machine Gold? Are there stickers?

[@AnrijsStraumeTattoo]

it was the one they've sent me, there's manu different colour options I think. Usually there are some stickers with the package. But I don't know how it is today.

[@ether91333]

Might be next machine 🧐

[@dragisajovanovic3956]

I can't imagine needing a 5.5 stroke ever, but I would still love to try it out. Did you try the Inkjecta X1? I've been using it for a year now and love it, got the Sol Nova Unlimited 3.5 a couple of days ago and can't wait to try it out, but have a feeling I'll be stuck with the X1 for a while. I can't wait until some of the manufacturers come up with a fully autonomous wireless machine which can switch strokes on the go, think that will be the grail when it comes up.

[@anthonymichel7949]

Have you heard of the tattoo pen Axys Valhalla ? You can change the stroke starting at 2.5 to 4.2 mm on the fly. You can put a battery on it so it goes wireless.

[@AnrijsStraumeTattoo]

I haven't tried inkjecta. to me it looks way too large and uncomfortable to use. (if compare to other wireless pen style machines) I've heard that they're light and balance is good, maybe one day i'll try.

[@lanny_ho]

When I think of this machine, it feels similar vein to a Dan Kubin sidewinder. Have you ever used his machines? Been thinking of getting an Avenger 2 for sure

[@AnrijsStraumeTattoo]

hey, yeah. I had used and I had video about it before too. I would say Avenger line of the machines are similar in a way to them, but much smoother version. Avenger will still feel closer to the rotary than coil, with Kubin I think it's other way, more closer to coil. and mechanism also is lot closer to coil with springs / heavier bar etc.. machine is heavier too. all depends on what are you looking to do with it. For my work - I would struggle to make it with Kubin (apart from lettering) But It would be easy to achieve almost all my work with Avenger machines. really great all rounder machine. Hope that helps in some way.

[@royltattooatl]

Great video. I was very curious about this machine

[@AnrijsStraumeTattoo]

Thanks!

[@Kolba_Team]

Equalizer fox 2 big same from 1 do 5 stroke I think, will be rew of any tattoome flat boy or zero Pen?

[@AnrijsStraumeTattoo]

I just checked Equaliser. By the look you still need to open and close screw with additional tool and unwrap the machine / possibly remove the needle too to change that stroke. And it's just standard direct drive machine. I think I've done Flat boy review here few years ago, if not then maybe I forgot to upload it, and if I will get Zero Pen I'll do review on that one for sure.

[@kevinryman5502]

I’ve been trying to get this machine but I haven’t figured out how to order it. Where should I go and how do I place my order?

[@judefowler6687]

I've been wondering the same! Let me know if you've found an answer anywhere

[@kevinryman5502]

@@judefowler6687 yes! I got my machine. I went to the vlad blad website and they asked for all my contact information. Then I got an email asking if I wanted to buy it and they sent a PayPal invoice which I payed. Then I got another email asking me to confirm my address. Then I was told the order was confirmed. After a bit I received an email with a link for tracking the order. It arrived in about a week and shipping was free. ((There might be issues with shipping delays/fees now because of the situation with Russia but this is how my experience went^)) They also included some free stickers:)

[@stainthecrown]

hey anrijs great video! waht kind of rca cord was that ? it looks super light weight

[@AnrijsStraumeTattoo]

Hey, it's - EGO Micro-Lite RCA Cord

[@ivanmendoza8457]

That ego micro lite is super good I've had one for two years I think use it all the time better than a battery on certain machines like the valhalla or the chronus which are a little tall

[@samyong5593]

Hi! Great vid, what stroke would you recommend using for 9RL up to 11/15RL?

[@ivanmendoza8457]

He dint use 9s or 14rl I'm pretty sure he uses 7 and 3s but if you wasn't mid to large groupings I'd use 4.5

[@heinrichwerner6860]

What voltage would you use for lines 11RL and 7RL? I know it’s for every artist different but just a direction?

[@AnrijsStraumeTattoo]

Mostly I line on around 8-9 volts (on all machines) With this machine using standard needle it probably it will be lower as it feels really powerful.

[@raev91335]

What voltage do you run it on? I have mines but I’m having issues adjusting to it I use my bishop wands and run them higher voltage But this machines says not to go over 8 voltage

[@AnrijsStraumeTattoo]

hey, I haven't used this machine for a while now, I cannot tell straight what voltage I used it. But I believe it was around 6.5-7.5. from what I can remember it was hitting hard even on low volts. I used it with cartridge grip/cartridges only. could be different with standard needles. I think it came with manual where there was guide for voltages. it could be on their website too.

[@JakebRyanClark]

Hi I am currently using this machine and having trouble with my rubber bands. They don't sit straight and hit my tubes or the motor arm and occasionally snap. Has anybody found a good way to place bands

[@veraha4706]

After a year of trial and error I found the only rubber bands that work are Dan Kubins thick ruber bands

[@gustavomegon]

I think the option for the old clip cord is a little bit useless. I saw on the website that It costs something like €60 more so it would be easier just to buy a rca clip cord… or do it like bishop that sells the wands with a really great quality clip cord!

[@AnrijsStraumeTattoo]

I think it's more for the people who use coils daily, and they don't want to use 2 cables to work with different machine. I would pay 60 for that option. Mostly I use Cheyenne and that one has completely different cable (3.5mm) so for example if I wanted to use also Coil + This machine, I would have 3 cables hanging around.

[@AnrijsStraumeTattoo]

But I do agree RCA is much easier to use and no need for extra clip-cord option for 60$.

[@gustavomegon]

@@AnrijsStraumeTattoo yes, I actually completely forgot about using another machine on the same Tattoo 😅

[@lordfaust_87]

I’ve heard some opinions on the weight and ergonomics of this machine as being a downside for it… I come from using a pen machine due to tendinitis, so I’m a bit scared that it could hurt my wrist… any opinion on that matter?

[@AnrijsStraumeTattoo]

I think after pen machines everything is uncomfortable hehe... I have done some tattoos with these, and it's not bad at all, as the machine is light. If you use steal grip this would be even easier to work with. But I do prefer pen machines for my wrists too over any other machine type.

[@lordfaust_87]

@@AnrijsStraumeTattoo thank you so much for the detailed response, I really appreciate it. I think I will stay with pen format I’m afraid. The multistroke system is really interesting, but my wrist health is more important 😂🙏🏻🖤

[@AnrijsStraumeTattoo]

@@lordfaust_87 Cheyenne just released machine where you can switch between 2,5 to 4mm ! I think that could be really cool one! If I will get one I will definitely make a video about it!

[@IGOR-wz8id]

Hey Anris! Thanks for your review! I’ve hear that someone was complaining that this machine didn’t sit well in hand with Critical power pack. Does it fit you well? And one more question right away. I’m gonna buy my first tattoo machine. Which is better Avenger or Ultron Pen?

[@IGOR-wz8id]

Oh and how’s sterilisation there? Do you pack it in a sleeve? How do you clean it since it has so many corners?

[@jefraii]

What brand of RCA cable would you recommend?

[@AnrijsStraumeTattoo]

I'm not too sure anymore, mostly I use wireless. I got EGO , it's really thin and light, so it's good in that way. but it might break easier then others. I think I broke one of them about 5-6 months time. what I still think is good deal.

[@jonathanjulius1903]

Bro can you please pleaseee do a review with Mast Lancer or other Mast wireless tattoo machine please 🙏🙏🙏

[@AnrijsStraumeTattoo]

I haven't heard about those machines. I only can review the machines I have. so if one day I'll get and try them I'll make a review for sure!

[@jonathanjulius1903]

@@AnrijsStraumeTattoo ohh okay thank you

[@veraha4706]

Been using this machine since it came out and couldnt figure the way to make cartridge needle not to shake… Usually happens only with thinner needles. Even vlad blad support team couldnt help me because the way they think rubber band should be placed makes it break the rubber band. Anyone had similar issues? Using high quality grip and cartridge so no problems there. Thanks!

[@AnrijsStraumeTattoo]

Hey, as far as I can remember it was ok for cartridges. and needles was smooth too, but I can be wrong. I found that lot of machines needle wobbles a little bit, especially 1rl or 3rl. And I don't know the way to stop it, unless putting stronger elastic band, that can snap too.

[@satanclawz6989]

Try Peak cartridges they have a stabilizer that keeps the needle from wobbling. I know there's others out there with a stabilizer in them also.

[@galganphoto]

I don ´ t have any problem using cartridges, no shaking or woblling. but when i tend to use traditional needles, it breaks them every time, on 8V for lining it breaks in like 3 minutes. I will probably need to get stronger rubber bands

[@raulcabrera966]

More videos anrijs

[@AnrijsStraumeTattoo]

thankyou! I'll try!

[@Laura-we8wl]

Hi - amazing review as always Anrijs. Some advice please everyone! My coil broke (again) - it’s a fast machine great for finer line - and has some give. I wanted to achieve soft feathered lines to create a feather. Or even those subtle lines for flower petals. Almost like a stipples line - but softer/smoother. Sadly that day my machine broke before this feather tattoo - and my rotary works and stigma v3 could not create these soft lines? But I had to still improvise - It didn’t come out how I wanted it to - It really bugged me. If anyone knows what I mean? Has anyone used this machine and can it create this effect ?- or any other rotary. I’m feeling lost and I would like a new rotary machine that does many effects. It’s a lot of money to blow and I have had so much bad luck with purchasing expensive machines and they not do what I want it to. Thank you all in advance :)

[@Chromeinktatz]

The

[@danielcarmona345]

Saludos a los mara Salvatrucha.