Anschutz 9015HP reassembly.

[@Hartrusion]

i was curious how the inside and mechanics of a 9015 do look like so this was highly interesting for me. Thanks a lot for this!

[@sub12airgunners]

Glad you liked it!

[@zx6fighter357]

I've just stripped my 9015 HP Black Hunter model, after watching your vids. My reg body was machine the same as yours, but my stabilisator was completely different to yours, had me scratching my head for a while. The vid was a great help. 👍

[@sub12airgunners]

Yes there has been a few different stabiliser setup's glad the vid helped

[@greyn2287]

А в версии 9015 НР на какой вес пульки расчитан ? и с какой скоростью она летит ?

[@tillysgunstocks]

you've just reminded me to knock a section out for the grubs screws on my new slug barrels, cheers jake I'd forgotten about that 😆

[@sub12airgunners]

No problem mate, good luck. Never had any luck with slugs in sub 12 though, but good luck. Thanks for watching.

[@tillysgunstocks]

@@sub12airgunners I've spent the last few weeks playing with the slugs and now I've gone back to basics and started from afresh, I'm getting absolutely phenomenal performance from the slugs now I've made a few barrel and gun tweeks.

[@Sae-fu5ch]

brilliant video guys 👏 great help to 9015 owners wanting to home service there own rifles as I think a lot of people think there very expensive complicated rifles but your way of explaining things in detail will dispel the myths around these rifles 😁 Great idea on machining the barrel like shown 👌 really enjoyed watching that one Thank you for doing it 😉

[@sub12airgunners]

cheers mate no problem glad you enjoyed it. Thanks for watching.

[@georgeb3383]

Great video mate. feel a damn sight more confident in what does what and how on my 9015. great work on the machining videos as well, fascinating stuff.

[@sub12airgunners]

nice one 😀

[@TrimmerFlooring]

Am i correct in thinking that to adjust the reg pressure it can only be done with the hex screw in the front of the reg body? It cannot be done without opening the rifle?

[@alanbradbury344]

Is this your last video on KZbin we all will surely miss your excellent work.

[@cliverkay]

How do you get the barrel seal out from the breech block ?? Presumable rip it as I cannot get anything behind it ??

[@terryjudd8455]

With the “O” ring sizes are they the outside diameter or the inside bore sizes.

[@chrisfigueroa3361]

Awesome video you really made me understand how this gun works and that not all air guns are the same this gun has alot of adjustment Awesome info ...wow it's crazy how the transfer port has to line up like that for the air to push that pellet through the barrel its mind blowing that a little orings can hold that much pressure 😳 🤯 thanks for sharing this info have good one cheer 👍

[@sub12airgunners]

Yeah, all that pressure behind just a little bit of rubber, crazy if you think about it. Thanks for watching.

[@johnrichards5440]

All brilliant stuff 👏 thanks

[@rumengergushki7260]

Could you make a tempreture stress test on your rifle and share the result. Test the speed at let`s say 25C and then leave it outside at around 0 and test the speed difference.

[@sevketylmaz6734]

Benim 9015 de problem var hız ciddi düşüyo soğukta

[@rumengergushki7260]

@@sevketylmaz6734 Evet, çok para için çöp tüfeği

[@sevketylmaz6734]

Dude, I'm a 9015 user, and I'm 9015 too 10m\sec low in cold weather [215 ms. drops from 205 what is the problem] Thank you s

[@GrahamHenderson25x]

brilliant videos!! ... now I've fitted a silencer the hammer PING is doing my head in 😄

[@sub12airgunners]

Yes valve ping can be irritating better than the loud bang though. Thanks for watching

[@barrythomas379]

Very good job.

[@sub12airgunners]

Thank you! Cheers!

[@colinbiggs244sniper]

Superb, thank you ,😃

[@sub12airgunners]

glad you liked it 😁

[@joshi4024]

Where will be the Power set if it needs to be? You didn’t show it the Video

[@sub12airgunners]

kzbin.info/www/bejne/boW8qWyNn79kfqc give that one a watch

[@joshi4024]

Thx, that s what I was looking for

[@Tim_Bassett]

Love it!

[@sub12airgunners]

Cheers Tim. Thanks for watching.

[@matoukmahrez8271]

hello I followed all the videos you put online you helped a lot of people to repair their own pcp for that thank you very much here is my problem I bought a PCP recently a HW 100tk canon 41 cm there is 16 joules my problem when I bought it in France I asked for a 35 joules 60 cm gun they sent me the 100tk 16 joules instead. because I live in Algeria I can't make a return otherwise it will cost me very very expensive in money. Given that I shoot at disciplines very far I wanted to raise it to 25 joules so please if you can help me raise it to 25 joules tell me which part I'm going to change because here at home in Algeria there is no power limit you can have a PCP of 150 joules so once again if he please if you can tell me which part changed i will buy them and thanks for listening to me again thanks for all you do

[@lisawood516]

👍👍👍👍👌👌👌👌

[@sub12airgunners]

Thanks for watching 👍

[@SteveC200]

You have a different spring stack to my tench converted 9015. Mine is ((()))((()))((())).

[@sub12airgunners]

Interesting, possibly the bellevilles are different thicknesses or the reg pressure slightly higher needing the stiffer stack. Thanks for watching.

[@SteveC200]

@@sub12airgunners It'll be interesting to see what pressure your reg is set to. Mine is 90 bar with with adjuster screw set to 1.27mm depth. In my notes from its first strip down the bellevilles measured at 9.9x4.2mm, 0.5mm thick, 0.7mm height. Hope thats of some interest.