I have both FX AND DAYSTATE = IMPACT M3 and ALPHA WOLF BLUE, keep this on mind one rifle is mechanical the other one is mechanical/electronic which means it has a computer , solenoids, however both need someone capable of thinking , mechanically inclined to work on those guns ,you can add on a lot of accessories so now that we establish the fundamentals let’s not be so dramatic if you can’t get part or extra warranty for you gun , stack up on extra parts most common to fail ( o-rings, trigger, etc) be safe.
@shumble69Күн бұрын
Very helpful and informative video, is the HUMA regulator adjustable in terms of power ?
@user-kg3wj6sb3c2 күн бұрын
Привет! Подскажи, пожалуйста. Если для 0.177 диаметры 2,5-3,5, то перепуски (трансфер порты) для 0.22 и 0.25 калибров в каких диапазонах размеров находятся?
@harryarteza34352 күн бұрын
Hi - will you sell the reg tool? Thanks
@harryarteza34352 күн бұрын
Also the barrel tensioning tool - I can't see Epic making these available currently, despite it being listed in the Epic Two manual.
@elvisjerrylee2 күн бұрын
I will be getting my new BRK Ghost 22ca. very soon and your video is full of very good information for me....Thank you. I noticed you changed your cheek piece to left hand, was it difficult to make that change, as I am also a left hand shooter.
@luisquevedo42222 күн бұрын
Amigos, con cual poston agrupa mejor la edgun leshiy 2
@yoojyim62383 күн бұрын
YOU ARE DOING GOOD JOB BUT I DO NOT EXCEPTED DUE TO WORK ON THE FLOOR. YOU SHOULD OR YOU MUST WORK IT ONTHE TABLE.
@airgunslugslingers3 күн бұрын
👍👍
@tromplee61074 күн бұрын
hi where can we find the adapter for the AR grip
@Beef0121do14 күн бұрын
What size X ring?
@Beef0121do14 күн бұрын
Will the 28mm fit the bsa r12? I see in your r12 video you fitted an aftermarket one with an X-Ring. What size X-ring?
@user-ox6nc6ly7f4 күн бұрын
can nickel plating be a good idea?
@bigeclipse7184 күн бұрын
Do you prefer the ghost ovet the impact?
@PaulSmith-jr1qe4 күн бұрын
Can you fit the FX bottle valve in the AGT bottle if you want to keep the original bottle but with a self sealing valve.
@Fabio44085 күн бұрын
as usual you make an amazing video a brotherly hug from Italy Fabio
@bravo154cm5 күн бұрын
Hi do you work on the steyr lg100 many thanks? I'm in the UK if you do send me a message and I'll be glad to see what you can do as I'm massively impressed with your engineering skills 👌 many thanks
@charlieg64115 күн бұрын
So tempted with getting a V3 but hearing all variants are now unchocked for slug use?
@1001space5 күн бұрын
honest review . are you going to do anything with the kalibr snipe in the future
@antonygray41146 күн бұрын
My new Wildcat BT came from factory producing 10.5 ft/lbs on setting 7 of the power wheel with 15.89gr pellets and I couldn't be arsed with the hassle of sending it back so this video is absolute GOLD for me. Thanks from a new subscriber!
@PaulSmith-jr1qe6 күн бұрын
Is there any reason why you didn't fit an external PTFE sleeve over the hammer spring as you did with the Urigan ?.
@demomboy66 күн бұрын
Where can I find one
@kiltedmonster16 күн бұрын
£82 then you have to buy all the bits, I'll stick with my old combro lol
@NateChrony.6 күн бұрын
If you have a 1/2 UNF barrel & a USB cable, then there's no bits to buy. Additional adapters are a very small fraction of sales, i can count on 1 hand the USB cables that i've sold in 1 year. The stripped down package seems to be right for the market.
@kallemlink7 күн бұрын
Hi love the video no it’s quite old but just got a dreamline tact in 22 and just wondering do you have to remove the trigger and trigger cier to replace original factory hammer to upgraded fx hammer. Than you andThanks for your time. Hope you can help.
@redgum13407 күн бұрын
Looks quite nice BUT it must have a battery onboard and plastic doesn't turn me on either. 3D printing seems ok but a better material should be used.
@sub12airgunners7 күн бұрын
it is 100% useable and works very well, the 3dprinted stuff is a matter of personal preference i think, the power supply again depends on what your doing 😀
@AOE55787 күн бұрын
15:54 The hummer the black part after installing back it has some play ? When not cocked, is this normal? Btw thank you again
@AOE55787 күн бұрын
15 :55 "in the hammer " the black part after installing back it has some play ? When not cocked ,
@AOE55787 күн бұрын
Nice ,, There is one strange screw located vertically under the location where magazine installed , and i don't know what is the goal of that screw ?
@nicksamsunggalaxys24047 күн бұрын
The taking off of the silencer which can cause the need for rezero is a no from me, I also like to take my chrony (fx) in the field with me sometimes, i would definitely lose some of those bits plus wires and power bank which would be an added cost for me adds to that, would have to be very cheap to consider it as a first purchase into the chrony world so to speak especially over the crombo at £50,00 which has no need for wires battery, apps pocket full of bits. Wish the product all the best but i cant see it catching on in all fairness especially when your prone to displacing bits like me and also the charging of power banks adds to the list of prep i dont want
@NateChrony.7 күн бұрын
There are variable adapters that go over a silencer - it never needs to be removed or re-zero'd. App? There are no apps used at all. What bits - there is only 1 piece as the adapter would be screwed to the Chrony. Combro - did you carry spare button cells? what about the rubber bands & alignment tool? 3 pieces... Battery - You've got your phone on you, if Android you use your phone for the battery, some iPhones do this as well - some dont, but as they move to USB-C it should be fine.
@Piupiu68az7 күн бұрын
En cuartos ya
@husar51008 күн бұрын
Hello Jake.Thank you for an excellent work you are sharing with us. Would it be possible to order the muzzle brake for FX dynamic? Happy to come down or meet you at Daniel's store. Many thanks Rob
@sub12airgunners7 күн бұрын
Hi Rob sorry we don't make them to see 😌
@colinstevens68378 күн бұрын
i got one from from the shooting show and had nothing but problems with sensor faulting no matter how many times i clean it
@NateChrony.8 күн бұрын
You haven't emailed or reached out to me to get this sorted? Send me an email & i'll get it sorted.
@colinstevens68378 күн бұрын
@@NateChrony. i did a little while after the show when i was getting wierd readings it doesnt matter now i will get an lmbr when i can
@sub12airgunners7 күн бұрын
we haven't had ours that long but we have really used it a lot with no issues, but i will keep my eye out for any problems
@colinstevens68376 күн бұрын
@@sub12airgunners nathan has emailed now to sort out so hopefully it was just a dodgy one. it was an early one so guess the new v2s are improved cant be any more dodgy than the fx since they changed the app
@MrJamesThekat8 күн бұрын
Hey! I dry fired my rifle to make sure no air was in the system and I believe this bent my valve. I now have a massive leak through the barrel and it wont hold air. Do you have the v2 valve installed (which is thicker) or any other modification that allows you to dry fire it?
@sub12airgunners6 күн бұрын
we have the original valve in our one but we are only sub 12 fb so i don't think it's a problem
@MrMattw9758 күн бұрын
The beauty of 3D printing is how versatile it is to changing design features....effectively a very quick way of rapid prototyping & getting things made quickly to prove concepts, etc
@NateChrony.8 күн бұрын
Absolutely - also the complexity of design would mean 3 different molds & a process to join the pieces... at $10k each mold... the cost is silly & would make the product cost HUGE. And yes, many, many errors have been made throughout development & adjusted :)
@ProperRural8 күн бұрын
Looks cheap and tacky and just to complicated compared to others on the market
@NateChrony.8 күн бұрын
Appreciate the feedback on appearance, the v2 should fix a lot of the visuals. Complicated - understand, its the trade-off - strip down what we sell you, as you supply screen, battery etc. & you save a lot. It "looks" complicated as he's got 4 separate adapters shown, for different rifles - You only ever need 1 adapter.
@myadventureman26368 күн бұрын
👍👍👍
@sub12airgunners7 күн бұрын
thanks for watching 😀
@fxpeter228 күн бұрын
Definately needs a couple of years refinement before it gets my vote. All the parts are priced separately, would be better as a comprehensive kit. Reminds me of the old Combro Chrony which was cheaper and neater, Sorry but not impressed.
@NateChrony.8 күн бұрын
Thanks for the feedback. The only options are the USB cables - which many have, so charging for something you (probably?) have is unnecessary, and the variable or custom adapters. Adding these adapters in when they're not needed would drive up the price unnecessarily, and the vast majority of air guns are 1/2 UNF, which are included for free.
@doomfathertm87718 күн бұрын
Too much fuss and messing about with wires phones battery packs needing a phone to connect to see results etc etc.... I'll stick to me £20 chinese ebay one, no messing about and as accurate as anything else.
@NateChrony.8 күн бұрын
Valid feedback. If I add a screen - cost goes up, battery - insane shipping issues & laws around these, cost goes up (battery option in development with a partner though). Also more durable without these. It is a trade-off & we went a different path.
@memememe26748 күн бұрын
In reply to your reply, having no screen and the faff of wires etc. If the price was lower many more would put up with the faff. At this price many won't. FX pocket will still be go to quality of heap ebay
@doomfathertm87717 күн бұрын
@@NateChrony. In other words, there's no way to compete with the Chinese ebay ones.
@NateChrony.7 күн бұрын
@@doomfathertm8771 They're a very different product. A NateChrony is a calibrated device with a significant feature set, the $40 is not. They're not competitors - the same as the NateChrony isnt a competitor to radar units for certain applications.
@NateChrony.7 күн бұрын
@@doomfathertm8771 No - its a different product. The NateChrony is a calibrated device with many features. If you dont want the support, accuracy, reliability - then purchase the cheapest product without the features you dont need, a valid choice.
@henrymoreland87198 күн бұрын
Bit of a technophob , but I like it.
@sub12airgunners7 күн бұрын
thanks for watching, it's a really good bit of kit for the money imo 😀
@three-phase5628 күн бұрын
Light and portable option, would be useful on pistols as well if it had an onboard battery. Certainly worth looking into.
@NateChrony.8 күн бұрын
Battery option coming on v2 unit - but it'll be "significantly" heavier. We did it without battery to make it as light as possible - for target pistols specifically. Our v2 unit is ~60grams, with an aluminium cover ~80 grams! (side note - Shipping lithium batteries & the different laws around them are horrific, as well as insurance)
@sub12airgunners7 күн бұрын
it does work very well, for tuning it's great because you can be in the garage and just keep shooting we just plugged in a tablet 😀
@50caliber298 күн бұрын
Wouldn't be confident using it on a springer & definitely be wary on a break barrel. Would be a lot better with aluminum barrel mount adaptors with a screw going through a nut set into the plastic body to a threaded hole in the aluminium adaptors. Making the adaptors out of Aluminium would not be as expensive as making the full body out of aluminium.
@NateChrony.8 күн бұрын
Not bad thinking! we had to design a lot for this exact use case & it took some work and was solved a few different ways. We've had many customers that are using Magnum springers & break barrels without issue to the unit for a long time now (there was 1 problem with an adapter due to a bad batch of materials, they got a bunch of replacement adapters at no cost). The only issue we had was the USB cable coming loose when >20ft/lb pistons, so there's a retention tab added on the standard unit (not the mini) you can use a zip tie the cable to. V2 has a different design approach for this issue. Also the adapters are deliberately plastic for a few critical reasons. Part of our QC testing is to load the adapters at the fixing hole perpendicular to the thread, they typically exceed 90lb force & max out the test rig. After all that, I claim its durable - if it breaks/fails during normal use, let me know & i'll make it right.
@Tim_Bassett8 күн бұрын
Looks super cheap, but I would take functionality and accuracy over that 🙂
@sub12airgunners7 күн бұрын
it is supper accurate mate and it is very easy to use 😁
@rayingles18 күн бұрын
Seems a useful chrono good honest review as always. I use the small FX chrono as I can shoot over the top of it down range to calculate BC of pellets. That said using this on the muzzle with FX downrange would halve the shots needed.
@sub12airgunners7 күн бұрын
it's a great little bit of kit 😀
@paulblundell80338 күн бұрын
I’m with you on 3D printed stuff.
@sub12airgunners7 күн бұрын
The 3dprinted stuff is great for keeping the cost down so i understand why its used 😁
@paulspeller9688 күн бұрын
to be fair not to bad at all for the money. and considering it’s new on the block i suspect there will be updates in the future. pretty handy for a range crono for sure saves a lot of faf
@NateChrony.8 күн бұрын
yes - this is a very early v1 unit, huge amounts of software updates have already been done (on our web page). & we're about to release a very different looking v2 unit.
@sub12airgunners7 күн бұрын
that's it mate it's got the start of a really good thing and it's great for indoor use 😁
@kempy95848 күн бұрын
👍🏻
@sub12airgunners7 күн бұрын
thank you for watching
@markdyson49048 күн бұрын
Just ordered one and its on its way, and a new one is out just my luck lol,
@NateChrony.8 күн бұрын
V2 is a physical change only - performance & features will be identical. Any software updates will be backwards compatible too. If we make it to the BSS next year, bring it along - we'll sort you out.
@markdyson49047 күн бұрын
@@NateChrony. Thanks Nate, the one comming will be fine, thanks for the offer!!
@lawrencewoolf10388 күн бұрын
Hi Jeff & Jake, are you still making the valve removal tool for Bagnall’s, they are out of stock at the moment. My Ghost is now back with my RFD for the third time in six months with valve issues. As it involves a round trip 70 miles every time it’s had a problem I’m getting a little fed up with it. After watching your video on how to access the valve I’d like to have the tool to be able to do it myself. Cheers
@sub12airgunners7 күн бұрын
we did have them on ebay but we will be making more for B & K soon 😁
@lawrencewoolf10386 күн бұрын
Fantastic, I’ll keep an eye out.
@noelwallace52578 күн бұрын
So we’ve taken a thing and made it uglier, more complicated more fiddly and cheaper looking like something out of a Christmas cracker🤷♂️🙄🤦♂️
@steve46978 күн бұрын
I've been thinking about 1,so thanks for the review..it will be interesting to see how they hold up over time
@NateChrony.8 күн бұрын
If it doesnt last a good 5 years then reach out & ill make it right. its simple & robust in the design, the electronics are protectively coated, not battery or screen to fail either. hold me to this.
@steve46978 күн бұрын
@@NateChrony. that's great 👍
@eoinwestman62228 күн бұрын
@@NateChrony.does it work with iPhone software or is it just for android. Looks good
@NateChrony.8 күн бұрын
@@eoinwestman6222 Yes absolutely - there's no Apps at all, it uses a web browser. So *any* device with a web browser (& Javascript) will work fine - tested & works on old & new iPhones. Read the FAQ on my web page, Apple does their own thing with standards - so it *might* not be able to be powered from the phone, unlike an android.
@NateChrony.8 күн бұрын
@@eoinwestman6222 Yes it does - there's no apps to install, any device with a web browser will work perfectly fine.