ANSYS CFX-CFD ICEM | Fluid Mixing Analysis in Static Mixer | CFX Pre & Post | Flow parameters | GRS

[@sofiafigueroaramirez6849]

Thank you so much for the video / tutorial !! I study Mechanical Engineering and this is my first time using a CFD software. I learned a lot, please keep making this type of videos. Greetings from Chile :) !

[@ANSYS-India]

+Sofia Figueroa Ramírez Good to know the feedback, here is the link for my channel, keep sharing with the one who wish to learn ANSYS kzbin.info/door/ro8LB2wkCMiCpE15d6jX1A

[@jianshuchen9766]

Sofia Figueroa Ramírez i

[@georgetorres4023]

Could you share us your geometry .step or .igs

[@marcmullenbach5786]

Very good video and introduction to ANSYS CFX!!

[@ANSYS-India]

Thank you everybody for your valuable comments.

[@ashokgc9160]

can i get the geometry files ?

[@mr-loki]

Great tutorial! Thank you for the help in understanding the basics of CFX. Keep working on the tutorials, you doing well!

[@jopho7777]

really so useful and magnificent demonstration.. thk u so much...

[@clementinekc6062]

Thank you so much for this tutorial 🙏🏽

[@hakankizil1443]

Thank u so much sir !!! So glad we have u

[@saqibahmad285]

Thanks a lot sir. An excellent demonstration.

[@ANSYS-India]

+Saqib Ahmad Thanks for feedback, for more tutorials visit kzbin.info

[@himanshu__370]

really good video and helpful

[@ANSYS-India]

These CFD videos also may help you. Check this link ANSYS | CFD CFX: kzbin.info/aero/PLOahOE6DpL4r7uMQl8n0VcEqoF7Vay7jg

[@lindokuhledhlamini5417]

Currently doing research on Screw Cooling through an Annular Channel!

[@pedrojunior6309]

BEST TUTORIAL! CONGRATS

[@pratikpatel3453]

Thanks for valuable information

[@hatembahri4314]

im working on tesla turbine, how can i run it into ansys fluent simulation

[@rakeshprajapati3390]

Thank you very much for such a nice vedio . can you please share some cases where diffusion phenomena occurs . i would request you to kindly share such nice vedio of spary and tray type deaerator.

[@kamalkosta8570]

Sir you have not given fluid properties like density and dynamic viscosity to solve navier stokes equation or RANS ( in case of turbulence) and also not given specific heat Cp to solve energy equation . Kindly clarify it

[@qa1948]

sir i have error same as you when i want go to solution. how to solve it?

[@pacullaronald4891]

where to find the 1st part of this video?

[@maheedharkorimi1773]

Thanks for the video sir, learned a lot. Can you please provide a video for mixing of two different fluids(especially boundary conditions). Thank you

[@sharadborana]

Sir thank you very much for the tutorial. Sir Can you demonstrate for the centrifugal pump mixflow in which rotar and stator are the domain, i have setup the case in cfx with all the required boundary conditions but i am having problem at interface of rotar outlet and diffusser inlet where it says overflow during during start of solution and it is not converged. How shall i contact you

[@稻米宁]

The ANSYS CFX solver exited with return code 1. No results file has been created.

[@pratikpatil8588]

Hello sir, When I try to click quick setup mode it gives error "This mode does not support interfaces. Please use general mode." Please help me with this

[@asharmd2001]

hi! This is an excellent video. Thanks. if possible can you do a tutorial or video on a solid-liquid flow or solid-liquid slurry flow in a simple pipe using Fluent-CFD software? Because one of my friends said that we can only work with DPM AND Particle tracking, the current models in Fluent cannot easily simulate macro-solid slurry. Is this true?

[@akshaymanthekar1032]

Excellent video sir!! Actually I want to perform analysis in which water in a cubical tank is being heated by nichrome coil. How can I simulated this kind of situation in ANSYS flow simulation? Please help me. Thank you

[@ANSYS-India]

+Akshay Manthekar write your request to [e-mail]

[@ashokgc9160]

can i get the geometry files of it

[@afroef5420]

can i have please a video that explain how i can design the geometry ? thank you

[@andreapfelbaum381]

👍👍👍

[@TraveEduTechVlog0555]

can you please provide the geometry file for this problem

[@isakkulcu569]

Update failed for the Solution component in Fluid Flow (CFX). The solver failed with a non-zero exit code of : 2 please

[@adarshdivyajyoti7750]

Sir, u have not defined any wall. So, in which cases we need to define walls?

[@rafish8608]

is there a draw of this pump in solidworks

[@softwaretraining-naval]

thanks for upload!

[@ANSYS-India]

Some more like this. ANSYS | CFD CFX: kzbin.info/aero/PLOahOE6DpL4r7uMQl8n0VcEqoF7Vay7jg

[@deeplalkiya2397]

dear sir, how to do dehumidification prblm using CFX?

[@NaRoChIn]

Hi... Think you could share this geometry for us to practice?

[@adeelasghar5762]

can you help me for cfd analysis of VCRS components compressor, condensor, evaporater,and capilarry tubes. . . i made these model on solid works but can not proceed furthor on ANSYS for analysis

[@TheWathdas]

could you help us in analysis a water turbine using ansys cfx tutorial

[@BK-dx3cp]

Please can you make the link to download the mixer file available?

[@alializadeh8195]

ممنون

[@priyankaminj7343]

Please tell me which paper you had followed

[@yairalexismunozrojas874]

Thank you very much for your contribution, I wanted to consult you. Have you done any simulations based on optimization of propellers?

[@FATASSSOVIET]

Thank you!

[@rahulgaji1008]

Thank you sir

[@payambugatti2020]

how could i find base files ?

[@tranbaongoc1799]

Sir, thank you for your helpful video. I am really interested in centrifugal pump simulation. Can I ask you a question related to this field? In CFX-post, I find that we can only use TURBO TAB with periodic geometries in order to get turbo charts whereas full geometries can not be initialized. So, how can I get turbo chart and report with a simulation of a full pump geometry? Thank you in advance. If it is possible. can I contact to you via mail.

[@xiaofenhe1585]

Thank you for the video Sir. I finally have some clue on how to start Ansys Fluent. However, may I know the static mixer is in solid? Thank you

[@ANSYS-India]

Yes

[@xiaofenhe1585]

+GRS CAD/CAE If I want to run a simulation on 2D fluidized bed, which method can you suggest me? I tried the surface from sketch, it seems like i cannot insert air from the bottom. Then I tried to import a 3D into Ansys, and make it as 2D analysis type. It shows error. Do you mind to guide me on this? Thank you

[@vitprokop2353]

Why you have ICEM in the video title when you are not using it?

[@leonardomontefusco4868]

you can take a lot of CAD files from this site.there is also the cad of this example =) grabcad.com/library/tag/cfd?page=4&time=all_time&sort=recent