Ansys Discovery Introduction: Simulation for the Design Engineer | Ansys Virtual Academy

[@firSound]

Can "refine mode" in Discovery access the solvers in Speos and Lumerical? If we have the licenses, that is of course.

[@canerkoyuncu6771]

Hi, thanks for the demo. Really powerful module exactly but I wonder a thing that can we make modification on surface model in discovery? It would be pretty

[@JudgeFredd]

Great introduction

[@ДмитрийСапрыкин-з5и]

Hello dear friend, can you help me please? There are two pipes of different diameters. The pipe that is smaller in diameter runs perpendicular to the center of the other pipe. When I add volumes, it turns out that the walls of the submerged pipe are not taken into account, that is, there are intersections of grids, how to cut these volumes taking into account the walls, since this is necessary for calculating the mixing of the two phases. I would be extremely grateful for your help in solving this problem !

[@carlostomasmoralezama1218]

You can insert a mesh from Spaceclaim to Ansys Discovery.

[@KETIVTechnologies]

Thank you for the tip Carlos! Nicole Morris | KETIV

[@koerna1]

Hi. Thanks for this amazing tutorial. Is there any way to export the resulting mesh as an .Stl, .Step or other geometry file format? Thanks in advance!

[@johndao8592]

Hello Andreas, Ansys Discovery can export a geometry as an STL file but it will not export the mesh. Ansys Mechanical, the flagship product, can export the mesh out. Sincerely, John Dao, P.E. Sr. Applications Engineer at KETIV Technologies

[@KETIVTechnologies]

Thank you John!