Thanks for providing such good knowledge in the field of CFD. Please provide some knowledge of the 3D column multiphase reactor. How to mark and patch the multi-fluid in the 3D multiphase reactor.
@bachircherafeddinebenhacin41255 жыл бұрын
amazing work. good job
@ansys_cfd5 жыл бұрын
Thank you!
@abhaykulkarni91785 жыл бұрын
Beautiful Bro.. Thanks!!
@ansys_cfd5 жыл бұрын
you're welcome friend Best regards
@abhaykulkarni91785 жыл бұрын
@@ansys_cfd Hey I m always interested in learning CFD... Which is also very important nowadays... BTW your tutorials are great... Keep helping...
@ansys_cfd5 жыл бұрын
thank you so much friend. Best regrads
@javimapo5 жыл бұрын
Thanks, excellent tutorial. Bendiciones:)
@ansys_cfd5 жыл бұрын
Gracias amigo. Saludos cordiales
@opashakal5 жыл бұрын
Thank you so much)
@ansys_cfd5 жыл бұрын
You're welcome friend. Best regards
@bhaviklathigara5 жыл бұрын
Perfectly done ✅
@ansys_cfd5 жыл бұрын
Thanks friend Best regards
@ildargaliev6865 жыл бұрын
thanks
@ansys_cfd5 жыл бұрын
You're welcome friend. Best regards
@sajadsalehi86484 жыл бұрын
Hi, thanks for the amazing Tutorial. For the Eulerian-Lagrangian model, should we turn on Eulerian in multi-phase part and turn on DPM; besides, creating an injection or we should only turn on DPM and creating injection? to be clear, imagine we want to trace a particle, why and when we should turn on EUlerian?
@poolinmacapagal Жыл бұрын
Mr. Salehi, did you find out how to set up this method on Fluent? I have the same case. Thank you!
@karimbenzema21963 жыл бұрын
Hi,could you please make a video of encapsulation simulation using multiphase flow...
@astafzciba4 жыл бұрын
Hik CFD NINJA, can you do some tutorials on plasma modeling? using the MHD module.
@ansys_cfd4 жыл бұрын
Hi friend, I will try in the future. Best regards
@naviddavanikabir4 жыл бұрын
love your videos
@ansys_cfd4 жыл бұрын
Thanks friend Best regards
@naviddavanikabir4 жыл бұрын
@@ansys_cfd I'm Navid. I'll send you an email regarding a very basic mixture problem. I'd greatly appreciate your help.
@alializadeh81952 жыл бұрын
مرسی
@sameerkulkarni8079 Жыл бұрын
Thanks sir! Could you please tell me which music this is?
@ibrahimtas18334 жыл бұрын
Hello my friend, Can you do the work of spraying the n-heptane / air mixture from a hollow cone type injector? For the fragmentation of the fuel, it must be modeled with the KH-RT model. Can you post this kind of helpful video? Thank you from now
@vikashkumar-cr7ee4 жыл бұрын
Hi, I want to simulate a transient two-phase flow with VOF in porous media considering capillary action. The porous zone is initially filled with air. I want to model the displacement of air with liquid water due to capillary forces. My main interest is the degree of wetting and the spreading of the wetting front. How to model capillary effects in the porous zone?
@onaizaabid97574 жыл бұрын
I have designed a 2D bubble column, with water in the column up to a certain height and air bubbling in from orifices at the bottom. Using VOF as the multi-phase model and k-e as the turbulent model. Boundary conditions are: inlet as velocity-inlet, outlet as pressure-outlet and all else are walls. I am having trouble determining the gas hold-up in the liquid column. Using volume-avg fraction of air gives me a constant value of 0.46 throughout , no matter how long I run the simulation or at whatever velocity. All help will be appreciated.
@vikashkumar-cr7ee4 жыл бұрын
Hi could you please make a video on mass flow/flux inlet for same above case
@ansys_cfd4 жыл бұрын
I will try Regards
@guneshjoshi82144 жыл бұрын
Hey Admin, Can you Publish Simulation of anchor agitator for large tanks?
@ansys_cfd4 жыл бұрын
I will try in the future. Thanks for the idea
@jdh81384 жыл бұрын
Great video! Just wondering how you made the animation playback in real time?
@ansys_cfd4 жыл бұрын
thanks for the suggestion Regards
@krishnavamshiganduri85934 жыл бұрын
super video sir can u please send me project of ethanol mixing in diesel sir please
@ansys_cfd4 жыл бұрын
Hi friend; I will try in the future make a tutorial about that. Thanks for the idea. Regards
@basics17295 жыл бұрын
Can you please make a video on a box type Solar Dryer (Natural Convection) showing both heat and mass transfer?
@ansys_cfd5 жыл бұрын
Yes friend I can, I will do in the future. Best regards
@basics17295 жыл бұрын
@@ansys_cfd Thanku Soo much
@ratri10232 жыл бұрын
Hi sir...I want to simulate a hydrocyclone separator. Where I want to input mixture of two particles (PVC and PET) and separate them and calculate the efficiency ...but i am facing a lot of problem inserting two types particle through inlet...I badly need your help in this case😓
@smtcfdsimulations81263 жыл бұрын
why is there no outlet boundary?
@SomaSekharGoudSontisomasekhar3 жыл бұрын
How to avoid Reversed flow on some faces of pressure outlet. I noticed from your simulation results, Can you comments on this.
@ansys_cfd3 жыл бұрын
The reasons for the reverse flow are various. It may be due to the mesh, the timestep, insufficient control volume at the outlet, turbulence pattern. etc. However, it can be insignificant in many cases. The only way to validate any simulation is through an experiment, if the behavior and the parameters are similar between the simulations and the experimentation then we can avoid the reverse flow. Otherwise, it would be necessary to try reducing the size of the mesh elements and the passage of time. Regards
@SomaSekharGoudSontisomasekhar3 жыл бұрын
@@ansys_cfd thank you for your response.
@mihirtripathy16665 жыл бұрын
you had stopped the simulation ,at the middle and then changed the inlet conditions, do these are a good practice ? as per my knowledge it is a wrong approach ,as the inlet conditions are not same throughout the simulation how the result obtained can be used in any research work. please clarify my doubt ,thanks in advance.
@ansys_cfd5 жыл бұрын
Hi friend, thanks for your comment, In this tutorial I choose to stop the simulation at 3. 5s and change the inlet conditions to 0, that is right because in this case the simulation converge, however you can create a function and set the same conditions, P=400pa t=3.5s, that is right too. It is the same both are a good practice. Best regards
@mihirtripathy16665 жыл бұрын
@@ansys_cfd thank you, please make a tutorial on boiling and condensation in a solar still.
@MuhammadAsad-ej4kv4 жыл бұрын
AOA sir..superb video. I need your help in my cfd project.is it possible to contact you via email