Antec Spark 120 RGB 120 mm Fan

[@TalkingstuffNet]

Antec Spark 120 RGB: amzn.to/38IBIUb Antec Prizm 120 mm fan: amzn.to/2Cc9Mfp

[@dkat1108]

Hey great review thanks exactly what I was looking for unfortunately these are not what I was looking for so you saved me from making the wrong purchase.

[@confexs7261]

Hey my fans start spinning but the fans don’t light up any color do u know how I can fix that ?

[@TalkingstuffNet]

Have you connected the rgb cable to a rgb header on the motherboard? I've is PWM for fan, second is for RGB.

[@ranbirkumarparashar1]

How I connect two antec spark fan as you have installed but I can't attach to mother board my mother board is older version ECS H61H2. Can I fit directly to corsair vs450 watt or other. Method like hub

[@TalkingstuffNet]

You will need a 12v RGB header, one option is a hub you mentioned but 12v only. You would need to daisy chain one RGB header to the other and one female pin would attach to the motherboard.

[@ranbirkumarparashar1]

@@TalkingstuffNet mother board is older version ECS H61H2.

[@ryanmoore7963]

so obviously each fan needs power and an rgb header supply which you can link the RGB's together but i have one Fan header left , if i buy a splitter cable can i use the one header split off to a couple of fans ??

[@TalkingstuffNet]

You could use a power header to power more than one fan using a splitter. Or if you don't want that you could purchase a Sata fan power cable which can power the fans off the Sata power. This will make the fans always run at full speed with no speed control though.

[@AnthonyJay]

Great review man! If my MB has two 4 Pin RGB Connectors, what do I need to do to make 7 of these work? I am building with the Lian Li O-11. Thanks!

[@AnthonyJay]

Nvm! Just saw a comment below with the answer. Thanks!

[@TalkingstuffNet]

You can daisy chain the fans to run more from a single RGB header.

[@AnthonyJay]

@@TalkingstuffNet Thanks again!

[@bryanvillareal1782]

Do you have option to change a White color lighting?

[@TalkingstuffNet]

It can be set to close to white color, but that would be dependent on your motherboards RGB software.

[@bryanvillareal1782]

@@TalkingstuffNet can we adjust the brightness?

[@dynamite9095]

How do I open the software

[@TalkingstuffNet]

It would depend on the motherboard you have, Gigabyte has RGB fusion, asus has strix , msi mystic light. Those are the software names, and they all work with the fans Led's.

[@chiragshroff610]

Hello sir I’m buying 2 of these fans but I have one male rgb header on the motherboard can I control both the fan rgb?

[@TalkingstuffNet]

Yes, even i have only one RGB header on my motherboard, but you can connect the male to female headers between the fans to chain more than one. I'm actually controlling three fans and one AIO's rgb with one on board header. I have shown the connectors in the video at 1:44

[@garyP102782]

I installed these but noticed when i have it set to breathing mode or any "pulsing" etc the fan rpms change.

[@TalkingstuffNet]

Hmm, I've not noticed any rpm change will listen in closer as when the fans ramp up should get louder. But mine doesn't seem to.

[@TalkingstuffNet]

Which motherboard are you using ?

[@youtubebrowser1730]

can i use them with gigabytye a320h motherboard?? please reply

[@TalkingstuffNet]

Couldn't find a RGB header on the motherboard, it does have pwm for the fan, but you won't get RGB on the fans.

[@youtubebrowser1730]

@@TalkingstuffNet ok thank u

[@jodafina10]

I got these and one of them isn’t working and none of them started lighting up even when all the wires are in

[@TalkingstuffNet]

Have you inserted the RGB cable into the motherboards RGB header. Only then they light up. Also check if the fan runs independently to be sure if it's actually faulty.

[@Tangysailor]

Great video...i ordered two of them. Waiting for the delivery One thing im confused is can we connect the two rgb fans to single rgb header because i have only one rgb header

[@TalkingstuffNet]

Yes you can daisy chain the fans rgb headers together, it comes with a capped male header which connects to the second fans female header. Now fan ones female header connects to your motherboards rgb header. I have shown the same in the video.

[@Tangysailor]

@@TalkingstuffNet Thanks for the info 😊 i have one more doubt. If we daisy chain two fans header there will be one connector left in the second fan right. Should we connect that to the sys fan header in our motherboard or just rgb header is enough to work both fan and rgb light ??

[@TalkingstuffNet]

Each fan needs its own pwm power connection, only for RGB when chained you need only one RGB port on the motherboard, it won't power the fan. This only helps with syncing the colors.

[@Tangysailor]

@@TalkingstuffNet oh great.. then im screwed, my b450 mobo has only one fan header and I can't find any fan hub since everything is out of stock in my place. Thanks for the info btw

[@TalkingstuffNet]

You could try a splitter, one pwm to two cable. I have seen those available on Amazon. www.amazon.in/dp/B078ZF1K56/ref=cm_sw_r_cp_apa_i_Lv1tFb13KY69N

[@superwario64]

Hey bruh, can i connect this to my asus strix gpu ?

[@TalkingstuffNet]

No, I don't think the Asus Strix GPU has a RGB header. It would only have integrated RGB.

[@superwario64]

@@TalkingstuffNet so the 4pin present on it is just for powering the fans right?

[@TalkingstuffNet]

The Asus gpu seems to have a RGB header(just checked) . These fans can be used with that header. Best is to check the manual and see if the 4 pins are marked RGB header, then the colors on the fans can be controlled via the GPU. You can use the GPU's software to control color. You will still need an external fan pwm header to power the fans, which would be found on the motherboard.

[@superwario64]

@@TalkingstuffNet in the box of my card RX 570 strix 8gb oc , its written asus fanconnect II 4pin hybrid controlled fan header. They haven't mentioned anything about it being an Rgb header.

[@ray4493]

So my MB got one CPU header and one Sys header. I ended up buying two of these. I can get the lightning to work in both fans with male-female connectors but can't get two fans spinning since there's only one sys header left. Is there any way I can have both fans running without an extra splitter?

[@TalkingstuffNet]

Which motherboard do you have? You can use any of the other fan headers (case/ AIO fan header) to power the fan. Once I see your motherboard model I would be able to suggest a better option.

[@preethamgaddam6755]

Hello Sir! Can I daisy chain 2 antec fans and CM's cpu cooler fan to an rgb controller?

[@TalkingstuffNet]

The two antec I'm sure, if the cm cooler is daisy chain able it should work. My deepcool AIO is, so could daisy chain it to the antec fans rgb header. If you have the cm cooler check if it has a male header.

[@TalkingstuffNet]

Yes, then it should work just fine. I also have an AIO and two antec fans daisy chained together.

[@preethamgaddam6755]

@@TalkingstuffNet okay, thank you sir!

[@preethamgaddam6755]

I will be buying a asus rog strix rx 5600 xt, the card itself has a rgb header, but my motherboard doesn't have a rgb header so, will I be able to control the gpu and fans' lighting through aura sync application if i connect the fan to gpu's rgb header?

[@TalkingstuffNet]

Yes you will be able to change the colors and modes via the GPU's strix application.

[@preethamgaddam6755]

@@TalkingstuffNet Thanks a lot sir!!!!!!! : ) for the info and for the quick reply.

[@dausifug3261]

well my lights are not showing i bought a pack of 3 and all of them spin but not light up

[@confexs7261]

Have u figure that out ? If u did can u help me bc I have the same problem

[@TalkingstuffNet]

Have you connected the RGB cable to the motherboard? One cable is PWM for the fan to spin, the second is RGB.

[@confexs7261]

@@TalkingstuffNet I connected both of them and it still didn’t work I tried reconnecting them and still nothing

[@TalkingstuffNet]

To the RGB header on the motherboard, not only between fans.

[@TalkingstuffNet]

Which motherboard are you using?

[@poonamsaraf9184]

Can we install 5 antec spark 120 in our case

[@TalkingstuffNet]

I think you can, as long as you have enough pwm fan controllers. If you don't, you could always use a converter and use Sata power instead.

[@poonamsaraf9184]

@@TalkingstuffNet please explain elaborately as i am an beginner pc builder

[@TalkingstuffNet]

Generally we have fan headers on the motherboard, which power and control the fans. Some have one, some have more. Each header is for one fan, there are splitters available to connect more than one to the same header. How many fans you can connect is dependant on how many headers you have.

[@poonamsaraf9184]

@@TalkingstuffNet what do we call those splitters

[@TalkingstuffNet]

This is what I'm talking about. www.amazon.in/dp/B07DK8SSC1/ref=cm_sw_r_cp_apa_i_pwkpFbWEJ94SD

[@subhamagarwal1295]

hello.nice video.I purchased the same fans from amazon but the fan stays at one constant color.i can change the color using msi mystic but it is stable.it does not change itself.help me please. i want them to keep changing like 3:38

[@TalkingstuffNet]

There could be a colour cycle option which would change between colours, or even rainbow option.

[@rated_tox1c990]

I cant get the fans to change colors, helpp😭

[@TalkingstuffNet]

Which motherboard do you have? Each motherboard has its own RGB software, so download the appropriate one and you should be able to set it.

[@TalkingstuffNet]

Have you connected the RGB connector to the 12v RGB header on the motherboard?

[@rated_tox1c990]

@@TalkingstuffNet I have to b450 tomahawk max

[@rated_tox1c990]

@@TalkingstuffNet And the rgbs are on but not detected by any software

[@TalkingstuffNet]

Have you tried installing MSI dragon center from www.msi.com/Landing/dragon-center/

[@shashanks7088]

Really nice video. It would be great if you can help me solve this problem for me. I have carried out all that you have said in this video, yet I am unable to see the colors changing. Both are stuck in orange. Below are my specs Ryzen 3800x Gigabyte x570ud (RGB Header supported)

[@TalkingstuffNet]

Hi, are you using Gigabytes RGB control software as Aura Sync is Asuss software implementation to control RGB.

[@shashanks7088]

@@TalkingstuffNet I am using Fusion V2 and it doesnt detect these fans at all.

[@jayke2849]

excellent job with the video!

[@TalkingstuffNet]

Thank you 😊

[@VeeboGamers]

U have one of the best content on youtube but I don't know why u don't have so much views and subscriber 🙁

[@TalkingstuffNet]

Thank you for watching 😊

[@VeeboGamers]

@@TalkingstuffNet 🧡🧡

[@TalkingstuffNet]

Please do share the channel with your friends.

[@VeeboGamers]

@@TalkingstuffNet sure sure done !!!🧡🧡

[@zachronigamerz8751]

Price

[@TalkingstuffNet]

Can't find the Antec spark on Amazon but the Antec Prism is available for Rs 990. Be careful because the prism is ARGB and has three connectors unlike the spark which has four and needs a different connector on your motherboard. amzn.to/3nmJSse

[@rourkebooth8840]

You just earned a subscriber

[@landont.5400]

Love the Indian accent.

[@akashsaha4218]

Nice video sir.

[@TalkingstuffNet]

Thank you for watching 😊

[@rated_tox1c990]

My fans aren’t detected by anything!

[@TalkingstuffNet]

Did you try speed fan app? Which motherboard are you using? Have you set the fans in the bios as pwm?

[@ranbirkumarparashar1]

MOTHER BOARD DONT HAVE ANY POINT TO CONNECT . ONLY COARSAIR VS 450 WATT POWER SUPPLLY . ALL SATA POINT IN POWER SUPPLY ARE FREE

[@TalkingstuffNet]

Which motherboard do you have, you need to use the RGB header for the lighting and pwm for the fan power

[@chandan1015]

good review

[@TalkingstuffNet]

Thank you for watching 😊

[@daniel6sharma]

aaasoos