Antec Spark 120 RGB fan Unboxing, Installation & First Impression on MSI B450 TOMAHAWK MAX

[@bluesparrows787]

Mine don’t light up, which slot do I plug them into?

[@vasapianocovers6331]

Great video , i just wanted to say that you are awesome, still replying to everyones questions and taking time with every single question and person. Just that. You are awesome and keep making videos. And stay safe during the pandemic :)

[@AnuragVerma26]

thanks man! you too stay safe. :)

[@Kenzie999-e9z]

My motherboard has rgb support but they won’t light up? I have the same motherboard but there are no rgb adapters in case

[@AnuragVerma26]

you don't need an additional adapter. Just connect fans RGB connector to any RGB header on the motherboard. check the motherboards manual

[@Hello-hl2zv]

So all I have to do is plug in the 4 pin into the mother board and then the light + fan will work? Thanks.

[@ray4493]

My MB has 1 CPU fan and 1 Sys fan header. Since CPU header is already occupied with the CPU cooler buying two of these was stupid. RGB works in both fan with male-female connectors but can I run both fans using a single Sys header? Without the need of an extra splitter?

[@AnuragVerma26]

yup a 3/4 pin fan splitter will work for you.

[@TheJacka45]

I have b350 tomahawk. It only has 1 jled header. Are these fans compatible and how would I install them?

[@AnuragVerma26]

I dont think this motherboard supports rgb. But you can use these fans by rgb fan controller. These controllers have rgb headers and power headers. You just have to connect through a sata cable

[@nunsiama]

Can i use this fan as a cpu cooler fan, its antec a400 cooler?.. It comes with an auto rgb fan... I want to change it... I used the same mobo

[@RetroNero]

there fans on dragon centre only changes to static colours only on that fan, I have 3 with no hub do i need one to work

[@sufaldas3582]

If rgb controller software allows, can this fans show multiple colors at a time or not.. Please reply

[@AnuragVerma26]

It cannot show multiple colors only single color at a time, Its and RGB fan. If you want your fans to show multiple colors at same time then you have to go for ARGB ones.

[@sufaldas3582]

@@AnuragVerma26 but it says, the fan has 18 individual controllable led lights like a argb. Kindly reply

[@mstrabhisheksingh]

Ring lighting is really bright... Looks good!

[@AnuragVerma26]

yup it is... :)

[@lloydb6182]

Hi would these be compatible with Gigabyte b450m s2h? Im unsure if the Rgb would be controllable, Thanks.

[@AnuragVerma26]

your MOBO has a 4pin RGB connector for LED strip but I am not sure that it would support RGB fan.

[@ib4095]

i want to buy 3 of these fans for my msi tomahawk max but would I need to buy extra cambles aswell and if so which ones. thanks

[@AnuragVerma26]

you don't need to buy anything unless you are out of fan and RGB connectors on your mobo. In that case, just get an RGB and fan splitter cable

[@snapforge]

Hi I need help... I bought same fans ... There are 2xA and 2xB pins like showed in ur video ... I connected both A pins to B pins and then connected 4 pins to Mobo ...OS is not installed , I just did a test by switching on PSU and powerbutton and only 1 of them runs , also with no RGB... My Mobo is steel legend b450...please help

[@AnuragVerma26]

4 pins??? if you have 2 fans then you can make a pair by connecting male n female RGB connectors. then you will have a single RGB connector and two fan connectors. and by default on first boot it will show random color.

[@oaskata7785]

are they 4 pin pwm and 4 pin 12v rgb

[@SirSelfunk]

I have the same fans and mobo (brand new), but some colors are off. For example for all shades of white i only get aqua, instead of yellow I get green etc.. only red, blue, green, orange, purple are the same as shown in Dragon Center app, and only 1-2 shades for each.. I can get only 9 colors total. Even if I unplug the fans, the mobo's led stripe has the same issue, so it's not the fans... Anyone has this pronlem? Buggy Dragon Center maybe?

[@AnuragVerma26]

Idk i am using mystic light 😅

[@Hello-hl2zv]

And if I plug a 3 pin fan into 4 pin will it work the rgb + lights

[@AnuragVerma26]

Yup it will work

[@Hello-hl2zv]

@@AnuragVerma26 thank you my good man

[@godbqfightingsaints]

Mine pulsate red just got them today on a pc I built last week how do I get to stay solid red

[@AnuragVerma26]

select "steady" in mystic light app and choose color red and apply

[@mubtasimmahbub4785]

Nice video brother. I wanted to know if i can use the antec df500’s rgb fans connecter with this types of fan’s female to male cable so that i can sync them with mobo?if so then this will require only 1 rgb header on mobo,am i right?

[@AnuragVerma26]

thanks, buddy! see if you are planning to sync these fans through mobo then you have to connect RGB connectors to mobo directly. only two fans can connect to each other making a pair so that you can use only one RGB header for two fans. if you use case controller then you cant sync through mobo. but you can power them through controller and use mobo RGB header to sync. antec df500 have three fans in front to you must have two RGB headers on mobo.

[@mubtasimmahbub4785]

Anurag Verma oh ;-;

[@mubtasimmahbub4785]

Anurag Verma what if i use a 3 - 1 rgb splitter will then can i use 6 sparks with 2 headers. (Replacing the front 3 fans)

[@AnuragVerma26]

@@mubtasimmahbub4785 yup that will work.

[@alia5615]

Hey! Did your fans immediately start working or did you have to turn them on in the MSI software?

[@AnuragVerma26]

They started straight away with static white color. For rgb effects i had to use the software.

[@alia5615]

@@AnuragVerma26 I cant get mine to work... I got all 3 fans connecting to the splitter for the RGB, then the RGB is connected to the JRGB 1 on the motherboard... My case is the corsair series spec delta RGB

[@AnuragVerma26]

@@alia5615 okay soo only RGB is not working or fans are also not spinning? check the arrows marked on the RGB connectors if they are connected the right way. if everything is okay then try only two fans by pairing them together

[@alia5615]

@@AnuragVerma26 fans are spinning, just no RGB. The arrows! So does the arrow on the pin have to be facing the JRGB1 logo because mine is not

[@AnuragVerma26]

@@alia5615 yup try it. and check the splitter connection. if nothing works, just connect a single fan and check

[@plasma5321]

Hey, would these work with my asrock b450m steel legend matx motherboard and could I control the color through polychrome sync?

[@AnuragVerma26]

yes you can

[@plasma5321]

@@AnuragVerma26 awesome, and thank you very much!!

[@SteveLBMK]

Hey, these look great. Can you adjust the settings using MSI software? Dragon Centre, I am guessing?

[@AnuragVerma26]

Yup i can control effects through msi mystic light software.

[@xkillax5488]

Hey man, I can’t seem to get my rgb to work on the cosair delta rgb case the fans work the lights don’t any help?

[@AnuragVerma26]

are you using an RGB fan controller or motherboard's RGB header?

[@HK-jc4nh]

@@AnuragVerma26 i have same issue and i have plugged it into RGB header on same motherboard

[@bart-ye2iq]

Where do you plug the rgb wire in and how much headers does the motherboard have?

[@FatLittleNotebook]

mobo has 2 JRGB headers you can plug them there.

[@ACPfortnite]

FatLittleNotebook but i have 4 rgb fans how can i make them all have rgb?

[@Carlos-tt5jz]

@@ACPfortnite you can buy rgb splitters off of amazon which will let multiple fans plug into one header

[@gzim7586]

I have the same motherboard but the software does not detect any device. How can I do ?

[@AnuragVerma26]

Make sure the connected devices are compatible with mystiq light then check the connections if still not work then update the BIOS

[@habibridoy5764]

Bro i need your help. my mobo doesn't have argb but my casing have argb controller built in. so i am thinking to control the argb fans by casing but not sure if they would work. i am talking about different fans. So i am confused. Need your help. Thanks.

[@AnuragVerma26]

Dont worry brother. A controller is the thing you need. Controller does not need anything from mobo. It only need power supply from PSU which is either from SATA or MOLEX connector. Controller have fans and argb connectors both so you dont need motherboard for that.

[@habibridoy5764]

@@AnuragVerma26 thank you. i tried connecting my exhaust fan with the casing controller and it worked. It was syncing with the casing rgb's. My casing model is Antec DA601. but only problem is casing controller has only 1 free port. so i can only connect one other fan to it. is there way i can extend or add more port. like by adding another controller and connecting it to the built in controller ?

[@AnuragVerma26]

@@habibridoy5764 you can use splitters

[@habibridoy5764]

@@AnuragVerma26 can you send me a link of one please

[@AnuragVerma26]

@@habibridoy5764 RGB splitter - amzn.to/3aDpbSf Fan splitter - amzn.to/2UTU4Lr

[@Naveenkumar-pu3ij]

bro, does Gigabyte h110M-H motherboard suppor this RGB fan.

[@AnuragVerma26]

if your MOBO has RGB & fan headers then yes. if it has only a fan header then you have to buy an RGB fan controller.

[@Naveenkumar-pu3ij]

@@AnuragVerma26 thanks for the quick reply bro, it doesn't seem to have rgb or multiple fan support. do you have any solutions for it. I bought this fan without checking my motherboard, my bad

[@AnuragVerma26]

@@Naveenkumar-pu3ij just buy an RGB fan controller like this www.amazon.in/Cooler-Master-Controller-Coolers-Radiators/dp/B0787FVBV8/ref=sr_1_1?crid=3TDA2RZLAJ68A&dchild=1&keywords=rgb+fan+controller&qid=1596904332&sprefix=rgb+fan+co%2Caps%2C276&sr=8-1

[@davidtiangco8310]

Is this applicable to msi mortax max as well

[@AnuragVerma26]

if your motherboard have RGB headers. otherwise you have to purchase a RGB controller .

[@haven6353]

Does it support an msi mortar titanium b450m

[@AnuragVerma26]

yup

[@johnflow6652]

just want to know if this has a 4 pin rgb pin or 3 pin? i have a msi b450 VDH Pro MAX

[@AnuragVerma26]

just watch the video carefully

[@BADMUNDALALA]

Bhai agar 4 fan tomahawk max motherboard se connect karne hai (3 front + 1 exhaust) to kya sare fan ke power connector ko alag alag sys fan 1 , sys fan 2 , sys fan 3 , sys fan 4 se connect karna padega ???? Aur kya all 4 fan ke rgb header bi alag alag connect honge motherboard ke andar ????

[@AnuragVerma26]

yes. i have 5 fans with an AIO cooler installed on my system. and I have installed them on each fan header

[@nathanaguilar9642]

How many fan headers are on this motherboard?

[@AnuragVerma26]

there are total 5 fan headers including a pump header which you can use to connect a fan. i am using total 5 fans including AIO cooler

[@santutunga4369]

Sir is it support Asus A320M K motherboard ? How many fan I will connect in this motherboard. Please sir please reply ? I'm subscribe your channel permanently.

[@AnuragVerma26]

Your motherboard has 1 x CPU Fan connector and 1 x Chassis Fan connector. so initially you can connect only one fan but if you want to use more than one fan then you have to use a fan splitter like this amzn.to/2DuNINm . but your motherboard does not have any RGB connector.

[@santutunga4369]

@@AnuragVerma26 thanks for instantly reply. Thanks for help.

[@enderdragon9236]

Can I use without RGB controller

[@AnuragVerma26]

you can control lighting through onboard RGB headers and fan through onboard fan connectors. other than that you can use the fan only through Molex connector but then you would need Molex to 4pin converter

[@hemasahoo4908]

Great video!!!

[@edwinjustin6861]

sir plz reply can I control the light setting in my asus ex a320 m gaming motherboard.Sir plz reply

[@AnuragVerma26]

Yup these fans support asus aura sync. You can definitely control RGB through mobo. 👍

[@edwinjustin6861]

@@AnuragVerma26 tnx bro you are the best ever for the instant reply you gained a sub

[@mamnisaini6614]

Hi bro my name is revant can I connect it to gigabyte b450 d3sh please make a detailed video

[@AnuragVerma26]

your motherboard have 2 fan headers and one RGB header so you can connect these fans.

[@kudasai2579]

I also have the same motherboad where do i connect the pwm connectors

[@AnuragVerma26]

You can connect them in any fan connector.. There are total 5 fan connectors on the motherboard if i am not wrong.

[@kudasai2579]

@@AnuragVerma26 do i need to connect pwm connectors for all the fans Or only one? I will buy 6 fans for mb511 rgb

[@AnuragVerma26]

@@kudasai2579 you have to connect each power connector separately. you have to use splitter like this amzn.to/36aWgBV if you are planning to buy 6 fans.

[@markcx5461]

www.asrock.com/mb/intel/h81%20pro%20btc/ where would i plug it into for this case?

[@AnuragVerma26]

your board have 2 x Chassis Fan Connectors (1 x 4-pin, 1 x 3-pin) labeled "cha_1 & cha_2" one is beside 24pin power connector and one is in the bottom left. you have two CPU fan connectors on top, you can use one of them.

[@markcx5461]

Anurag Verma that wouldnt give it rgb tho would it? I thought it needs a rgb connector

[@Gym.hype.]

Hay man I loved your video... did you use a free software or did u use WinZip?

[@RohitVermadarkwolf]

Nice 1

[@jozzid2879]

use this if you want use ARGB fan to this motherboard kzbin.info/www/bejne/e5_UiIdpn6doidE

[@AnuragVerma26]

sponser it then :)

[@govindthapa9659]

where did you mount this cable 3:53 ps:- im new here

[@AnuragVerma26]

There is an RGB header on the top of the motherboard. We have to attach both fans RGB male and female connectors and make them a single RGB female connector that will connect to mobos male header. And for power we have to use two fan headers for each fans

[@govindthapa9659]

@@AnuragVerma26 sad i dont have rgb header in my motherboard

[@AnuragVerma26]

Which motherboard do you have?

[@govindthapa9659]

​@@AnuragVerma26 Asus EX-B365M-V

[@AnuragVerma26]

@@govindthapa9659 i dont think it has any rgb header

[@marko007xdz6]

It has it everything cringe music bad pixel quality and a minion meme no hate btw

[@karjedav]

Thoda explanation de na na bhai