Antiqe Corn Sheller Restoration

[@maxc.gurrero9893]

Always been fond of watching old and antique things coming back to life bringing back all good old memories. Hats off to all the great restorers out there.

[@ВадимКузнецов-з2й]

... отличная получилась работа, выглядит как будто новая!-, я на севере видел похожий аппарат, только на нем кедровые шишки шелушили, извлекали кедровые орехи из шишек, здоровья тебе и всего самого наилучшего, новых творческих успехов!!!

[@vladimirvladimirovich3528]

А где на севере шишки? Они как раз на юге вдоль китайской границы. И рушилка для шишек совсем другая, там шишку в труху размолачивает. Из трухи делают подушки и матрасы - дорогая вещь!

[@haroldcoots8433]

I liked how you cleaned up the casting messes. I also appreciate you showing people how it works. I have one of these without the stand and I have used it. I believe I will work on it this winter.

[@cynthiacooper8288]

The blue color is beautiful! Thank you for showing how this works!

[@paulkersey338]

Using the pillar drill as a lathe. GENIUS !!

[@stevecollins2770]

I was so surprised when it ejected the shucked cob!! It was worth watching just for that!!!

[@ziegenarty6188]

Such a cool tool. I've never seen that before. Nice job on the resto.

[@Foltl]

this disc with the sharp points looks like a medieval instrument of torture... Great work!

[@hectorlao8604]

You're using an electric drill for a lathe? EXCELLENT!

[@amille223]

Bad paint job and you didn’t have to destroy the old wooden handle. There were ways of getting that bolt out without destroying a vital piece of its historical past. That was a shame that you did that. Also, If the wooden handle seemed loose and sloppy from years of wear, you could have remedied that by just inserting an appropriate size sleeve to take up the slack. Always think things through several times before acting. With that being said, that is one cool machine. Thank you for sharing with us and for showing us how it worked.

[@Littleblackrocket]

Great restoration! Appreciate letting us see it in action.

[@elegances1]

Зачистка заусенцев на точиле, это было эпично, но венцом реставрации было воронение пружины. Чувак скажу по секрету, если пружину нагреть, то она перестает быть пружиной. Удивило наличие хоть какого то верстака, а не тупо на корточках как большинство.

[@hanaokamura7947]

Fascinantes tus restauraciones, me embeleso viendo tus vídeos, excelente trabajo, saludos desde Sinaloa México. amor y Paz👌🤗✌️

[@billywylie3906]

did a good job on a machine i used in my childhood a lot...i use plain vegetable oil instead of motor oil to quench my metal parts...cheaper, easier to dispose of and works just the same

[@chadwedul1787]

Did you try shelling before disassembly? Does it work better? Grinding and sanding do little for performance.

[@amilcarmoncada1801]

Muy buen contenido de este video y la Restauración de esta desgranadora de maíz antigua quedo excelente, mis saludos y respetos desde Venezuela.

[@RIZMINE]

Clean job and have never seen one of these before 👌

[@reginaflorentino6567]

Maravilhosa peça, adoraria ter no meu relicário,por ser antiga muito engenhosa.🌽

[@jackjacke4654]

Just to find this early stuff in one piece is amazing...

[@aldrinalejo1810]

Wow..very satisfying

[@keithriggs4456]

I admire your hard work, but your painting skills need help

[@jalechavez6042]

Que linda máquina...ji ji ji ...Muy Bien....Saludosss

[@romeovidalrodriguez7754]

hola buen video saludo des de argentina.

[@LucasGeniar]

I really liked the restoration but I think there should've been more attention to detail on the paint job. For now it's an 7/10, with proper painting I'd go for a 10/10.

[@ezequielsilva2709]

Que ferramenta mais engenhosa! restauração PERFEITA!! 👏👏

[@minasaluna8618]

Nice , love watching 😊 😉 .

[@starykov]

great work, nice color, interesting device

[@oldgadget1]

drillpress as a lathe. very clever

[@odillaurent1053]

Cool stuff ................

[@tammyslash7251]

How 😎 cool. 😊 🙏 thanks

[@larrykelly2838]

My grandparents had one of these and that was along time ago.

[@warrickburgos7662]

NICE.,...

[@valdemargomes5100]

EU GOSTEI DO TRABALHO MUINTO BOM MESMO NOTA 1000

[@petricabistricean1806]

super tare

[@mikeharris1558]

I wish someone could explain to me why anyone would paint anything that colour on purpose? So many manufacturers use it and so many of the restoration channels use it as well but it truly must be one of the most vile colours you can choose!

[@persioboni9373]

Excelente.

[@georgelequin5070]

Grew up on a orphanage and we had something similar but the wheel was around 3 feet in diameter! A little dangerous!😂

[@edcochran714]

Works great

[@jackjacke4654]

Leave the bugs, that's patina!

[@sallyebsworth2531]

Terrible paint job but otherwise good restoration

[@susanolson3611]

Before restoration it looks like a medieval torture device!

[@дмитрийсигорских-т1в]

👍

[@вадиимволков]

sumptuously

[@charles-y2z6c]

Kind of boring, but I couldn’t stop watching it.

[@MadMax-yq9ix]

hell no what are you doing :o B+ for effort but the paint job was half assed should have found a new bolt for the handle

[@AndreyZhukov-iu4ko]

Bad paint =/

[@nickblakemore3643]

RIGHT, I WAS LIKE "REALLY, HES NOT GONNA FIX THE SPOTS HE MISSED" LOL UNREAL

[@MrJsebak]

😎😃😂😂👍

[@ghoulgoil5029]

I’m not sure I understand your painting choice.

[@hp9mm]

seriously Bad paint job

[@PiperAmadeus]

Now that is corny.

[@Tiktalkrandom]

1. Paint work was awful. 2. Don't take 1 min to unbolt something. 3. Take a few seconds showing/inspecting each part. Easily this could of been a 15-20 minute video.

[@dax6655]

3