Antique Hand Cranked Hammer Drill - Restoration

It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video.
At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @HandToolRescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Bendurion
Courtney Maleport
David Barker
Greg Marston
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Bosch
Mellissa Marcus
Mike Schlodder
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
potokslow
Todd Medbury
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Alex Breton
alex latzko
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
Jordan Page
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Marius Costan
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Schultes Thomas
Scott Marshall
Sergei Shvartsman
Svenja Kuckla
The Carlsons
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤
My camera:
Panasonic HC-VX11
I payed a lot of attention on the lighting when filming this video and also the quality of the sound to create an ASMR style video.
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
• Building a Huge Rotary...
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics

[@AtticusWayne]

I gotta admit, there’s always an anxiety filled moment at the end when I feel like you’re not going to test it out and you never disappoint

[@gloriouspopemantom373]

That video timer ticking down and no test yet.

[@LachimusPrime]

26:07

[@Briefklammer1]

i feel exactly the same, till the end I didnt know what this is

[@harshiljogi862]

😂😂😂😂😂 felt the same!!

[@zkmueller]

@@gloriouspopemantom373 🤩🤩

[@carbon2593]

The sheer excitement one gets from "I Make A New One....", this man is the single greatest therapist to ever live

[@mymechanics]

I'm glad you like it :-)

[@carbon2593]

@@mymechanics Love it in 4k!

[@nickharvey7233]

Exactly! He kept us hanging in this episode, avoiding it at several opportunities, before the finally slapping it down with the drill bit...

[@theobolt250]

We should make a special educational/instructional MM for psycho therapists

[@theobolt250]

@@nickharvey7233 If we get spoiled the effect weares off. We should yearn for it every single time. 😁😉

[@MonkTorius]

I have tried to watch other restoration channels that come up in my recommended, and it's just not the same. The sounds and enjoyment from your videos are unparalleled in my brain. Definitely, my favorite restoration type channel.

[@Varangian_af_Scaniae]

There is one channel with almost the same content and name. I'll sometimes mix the up and get so disappointed 2-5 min into the video if it is the other channel. This channel outcompetes every other restoration channel.

[@charuchandramandi1072]

​@@Varangian_af_Scaniae❤❤❤❤🔭🔭😊 in🎉😊

[@pascha4527]

Well, my mechanic and tysy tube are the two best in my opinion

[@mia2060]

no fr i thought i was the only one cause i tried watching others ans i was like this isn’t right

[@mikel1199]

This channel is by far the best at restorations. They make the item better than it was the day it was made! Like a work of art.

[@ilikeknafs9563]

The most impressive part to me is when he is like “I make a new one” and he makes it look so easy and gets the part exactly perfect . That alone is so mind blowing how he gets all the dimensions/proportions and measurements so precise with such ease (often freehand) . This guy isn’t human

[@archkull]

He's very skilled

[@jellysquid8077]

It's like in an martial arts movie, where the main character trains so much that they achieve super-human levels of ability. Except instead of putting that training into becoming a karate master, this man put that same level of training into being a restoration master.

[@mediocreman6323]

I think he may have cut out the tries which did not succeed 😉 I think he has included a few of those fails in his second channel, though.

[@ilikeknafs9563]

@@mediocreman6323 ok that makes more sense

[@Galaxieed]

Most things don't have to be perfect to work. Close is fine

[@androkon6920]

When you sanded down that rivet, and blued it, and it was completely flush, I felt that deep down. I really did

[@Capt_AwesomePants]

It is absolutely beautiful

[@Spike0000]

I thought it was just me...The guy should do a TV series....

[@Grove332]

@@Spike0000 Primitive Tech went on to make a tv series. Now nobody knows what happened to him. I think donating to Mymechanics' patreon would do more good than him going on to a tv series.

[@samsignorelli]

True...when you pound something to fit like a rivet, and then file/sand it to the point where you can't see the join line....THAT is skill.

[@SoBeDragon0]

That part of this video was my absolute favorite. Perfection.

[@sandpitBrosAdventures8191]

There's no other restoration channel on KZbin that I've found that's as good as yours. You set the bar sir.

[@mymechanics]

Glad you like it!

[@campusman1957]

yes there is

[@sandpitBrosAdventures8191]

@@campusman1957 who? Lol

[@KrisDouglas]

He's amazing, but also check out @HandToolRescue, his Canadian skill twin!

[@sandpitBrosAdventures8191]

I like him too Chris

[@JessicaAVoigt]

So cool to see you using some things that you restored in the past to help restore new items! Amazing restoration as always!

[@mymechanics]

Thanks, I'm glad you like it :-)

[@mohammadnadheemu3961]

I also like it bro, as always

[@sunilghonge1578]

@@mohammadnadheemu3961 Gb

[@sunilghonge1578]

@@mohammadnadheemu3961 Gb

[@appalacharialamanda8560]

..

[@howizee]

Love watching the tools and equipment that have been restored being used in other projects.

[@mymechanics]

Thank you, I'm glad you like it :-)

[@pedrofelck]

I love one aspect of your videos beyond the repairs: your editing. That's part of what makes them so enjoyable, the way you show the progression of time without just accelerating the video is wonderful.

[@mymechanics]

Wow, thank you!

[@danielmcilwaine720]

This is why I watch these videos and basically no one elses. Hate sped up footage.

[@MoultrieGeek]

I'm so spoiled by My Mechanics that I simply can't watch any other "restoration" channel. What this man does is a beautiful blend of art and science, all the rest are mere pretenders.

[@mymechanics]

Thank you very much, I really do appreciate it :-)

[@FlourescentPotato]

No need to be so rude to other content creators. There are tons of great restoration channels.

[@goldpotato1885]

@Brandon Alger could you give a name or 2?

[@FlourescentPotato]

@Brandon Alger That's very rude to say. It's not cutting corners, it's being realistic based on what you have to hand. Not everyone has a full machining shop and enjoys destroying the item's original character.

[@steviedingledangle7982]

@@FlourescentPotato so why are you watching?

[@user-qx8jf7re8i]

На три вещи можно бесконечно смотреть в жизни - Как течет вода, как горит огонь и как "моя механика" реставрирует казалось бы "мертвые" вещи! Великолепная работа!

[@gayazmusin1334]

Не мёртвые вещи, а уже практически обглоданные кости, я бы так сказал.

[@PavlentijIvani4]

Согласен

[@bryandelahoz6063]

May no one ever despise you as this man despises sharp edges. Great content!

[@Vickie-Bligh]

🤣

[@matthewt88]

The shoulder stock part gave me chills. Next level stuff.

[@mymechanics]

Thank you very much :-)

[@blakfyr4773]

It was 2 pieces then I looked away for a second. When I looked back it was one piece. He is definitely a magician.

[@simongroot7147]

The perfect solution to the long, dark teatime of the soul here in Australia. Watching someone who knows how to use a file to make a radius. Thank you for the video.

[@mymechanics]

Thank you very much, I really do appreciate it :-)

[@paulsharp695]

You could always rewatch Clickspring. He's started the Antikythera build again.

[@RavenMacy]

🇦🇺 the boredom is real , this brightened my day 🌞

[@JorryGT]

You are an absolute craftsman and I LOVE watching your videos! There is nothing more satisfying than seeing how much life you bring back into these items, it's unbelievable 👏

[@uglyboy4067]

26 minutes we'll spent watching this. Thank you, it's remarkable watching something being turned from rust, to gold.

[@mymechanics]

Glad you enjoyed the video

[@ShamankingZuty]

It's always so satisfying to see you use tools you previously fixed. It's like watching a TV show and saying "I remember that character!"

[@mymechanics]

Thanks, I'm glad you like it :-)

[@nobleherring3059]

It's a nice doubling up of the channel's theme. The tools haven't just been restored to looking nice. They've been restored to *usefulness*, and get *used* Something pleasant about it

[@Nixcillian]

I swear, this guy's "I make a new one" gives me life every time.

[@la_creatura0000]

same to be honest

[@tritono666]

I feel so useless... I can´t even make a decent lunch...

[@BullsEye72]

this @@tritono666 is useless.... I make a new one! (just joking, I feel the same heh)

[@vd7125]

@@la_creatura0000 sumon😂

[@la_creatura0000]

@@vd7125 meow?

[@Boydist1]

Damn it. It’s 12:25am, I have to work early tomorrow, I know nothing about engineering, but I couldn’t stop watching this video.

[@Split-Infinity]

This is the kind of work that would give meaning in my life.

[@evilotis01]

the part at 9:05 where you make the rivet just... disappear into the plate is truly one of the most beautiful things i have ever seen

[@MonkeyWithAKnife]

You would love the work Chris over at Clickspring does then, with clockmaking and his ongoing series on the antikythera mekanism, be warned though youll be addicted and his videos have a long time between them ;)

[@user-dr1kv7gk5j]

NK

[@evilotis01]

@@MonkeyWithAKnife oooh, thanks for the tip!

[@Altarofpigs]

Came to say the same thing, most impressive part of the video.

[@SondreGrneng]

My only issue with clickspring is that I have somehow managed to associate his videos with carbonara. Now I really want carbonara.

[@HannahJGriffiths]

I’m a 23 year old female nurse with no background in restoration and yet I just can not get enough of your videos. Fantastic work!

[@shsch492]

From one nurse to another... it's never too late to start small! It doesn't have to be a tool, you can do a chair for your house or a bookshelf? It's not like we can do anything else during this pandemic!

[@barthoogeveen8539]

I will teach you

[@agammagio7731]

Hy

[@tossapholpornnong9796]

I love you🥰🥰🥰

[@shsch492]

We need a sign that says please don't feed the Cringy Simps! Merry Chrismas!

[@Mr.J281]

Wow, this is actually A true restoration channel and not just cleaning up old tools.

[@cat3crazy]

I always enjoy watching you put items back together, making them better than they originally were.

[@TysyTube]

I Love my mechanics ❤️✌🏻

[@sampowdrell1820]

I love tysytube

[@holocaust_2.0]

I love My Mechanics and TysyTube!

[@sheep1ewe]

I love both of You guys!

[@wallyhulea219]

@@simoncrd2110 Nu sunt TysyTube, dar te inteleg de ce ai vrea sa-ti dea atentie.

[@vinothansham]

We love you both ❤️❤️

[@markbinner2375]

I have watched hundreds of KZbin videos and this one is the closest to perfection I have ever seen. Beautifully filmed, no annoying music and sampled handclaps, just calm, clear poetic craftsmanship. I totally agree with Paul McKenzie's comment about it being art. Even if I wasn't interested in restoration, I would still love the video. What a talent!

[@lolrekt6269]

If you like this you should check out broxh on twitch, he does some great work

[@lambdaman3228]

@@skyblue3305 Why would I do any of that? Plus it's all misspelled.

[@lordsinisterreal7006]

i agree with you @Mark Binner

[@ryadbdvfjdfrgfjvdyfdutduof9481]

الوووو

[@user-bo3wv4hh6y]

Потрясающая работа! Сколько сил было вложено! Приятно было смотреть

[@TopHatTITAN]

Imagine how happy the tools and items he restores are, especially the ones he uses to restores others!

[@Maximillieeee]

This guys skills are impressive. It’s like watching an artist work.

[@getin3949]

He is a sort of artist, restoring items to their natural look, beauty, it's all how you look at it I suppose.

[@eibeab]

You ARE watching an artist work

[@Maximillieeee]

I agree

[@jimtalbott9535]

@@eibeab EXACTLY! Art takes many forms - mechanical included.

[@florascent9ts]

he is very skilled, but it's also a matter of having the thousands of dollars of quality equipment he has.

[@Ernzt8]

Such a satisfying sound when everything clicks together

[@stevel7310]

Yeah, it's like an old Schwarzenegger film, as he's getting all his kit and guns together just before taking on the bad guys near the end. :-)

[@hardhathatchery]

I really admire your perfectionism. Unbelievable how you turn things that are trash in the eyes of most people into the original, no a far better, optimized state. I've watched every video of yours with joy!

[@user-jv5it8gq8s]

Как же мне нравится смотреть когда восстанавливают старую вещь.И от куда вы только знаете что к чему подходит.ВЫ огромный молодец и руки золотые.Похожая вещь была у моего отца в его огромном столе.Походу он любил собирать старинные инструменты.👍

[@camillecirrus3977]

I have a feeling this guy once slit his finger on a particularly sharp edge, then proceeded to remove *all* sharp edges from that point on.

[@davidkaiser4632]

no it's just common practice to.. nothing triggers me more than sharp edges on steel or zipties not cut properly

[@turbosoggy8404]

@@davidkaiser4632 It just seems weird because most of the edges he removes are inside the things he restores.

[@dakotaharmon2972]

@@turbosoggy8404 It occurs to me that the main difference between hand crafted and machine made is removing the sharp edges - and of course doing it without getting your hands dirty or any grime under your nails! Love it

[@tomislavsertic4035]

Schweizer Präzision, weltweit bekannt !!!

[@Epyxoid]

He's just thorough. That's why I watch him... It's not about function, it's about perfection.

[@Gamer-girl332]

“Dying from boredom” “Ping new video” Brought back to earth Yeeeesssss new video 😍

[@mymechanics]

Thanks for watching, much appreciated

[@Gamer-girl332]

@@mymechanics no problem I love you video I like to rewatch them a lot. Thanks for posting videos for people like me that like to watch

[@stevenbrodowski5471]

I would absolutely watch videos that are just the full unedited sandblasting portions! ASMR and so satisfying!

[@elenap15227]

This dedication and atention to detail is what i imagine when they talk about the quality of swiss watches in stories.

[@AceGamingProductions]

My favorite thing on the planet is when something is beyond repair and he says "I make a new one". I'm an automotive technician and it still makes me happy

[@mymechanics]

Nice to hear that, thank you very much :-)

[@taisiyamaksimova7745]

The most beautiful flowers grow from dirt, the most beautiful people - often scum.

[@misinterpretedphysics]

I wished he had kept the old handle but overall I completely agree with you.

[@lindsiwooldridge8756]

☠☠☠☠☠☠🥱🫀🫀🫀🫀

[@raptor2204]

@@taisiyamaksimova7745 Good say

[@iceyedge2245]

Yours is the ONLY restoration channel on KZbin that truly takes this subject seriously. Others just take it apart, clean it, and paint it with rattle can. It only gets them 85% of the way done. You Sir, get the other 15% or more my hat off to your quality of work. You've earned every single one of your subscribers

[@bluebukkitdev8069]

Handle restoration was my favorite part. Absolutely perfect. Immensely satisfying.

[@Moulk]

Hey, I just wanted to say I love your videos. You are very talented and watching you fix old stuff is somehow really satisfying and calming. Keep up the great work!

[@AdelsonDePaulo]

I love all vids. No music, just the sound of tools.

[@warrenharrison9490]

It's very relaxing.

[@AdelsonDePaulo]

@@warrenharrison9490 sure.

[@jl3390]

Received Notification: OMG! A NEW VIDEO!! I'M SO EXCITED!!! Clears schedule, buys ingredients, makes nachos, enjoys video... Clearly one of the more difficult, time consuming, extensive and beautiful restorations to date. Well done, Maestro Mechanics!

[@mymechanics]

Yay! Thank you!

[@cuteface6901]

I came for the satisfying process and stayed for the ingenious ways you approach problems.

[@richfiles]

Never gets old to see such fine attention to detail and extraordinary craftsmanship on these restorations! Also, looking at the shape of this device... The stock, that pistol grip, the overall shape... Hmm... Yes, this is _clearly_ a "hole rifle". It fires holes! LOL

[@jarohdan9543]

My 12 year old son loves watching these restorations. When I tell him there is a new video he says great the man who must make them shiny . :)

[@mymechanics]

That is awesome!

[@kampfgnom13]

My 7 year old son also loves the Restauration videos.

[@bsvenss2]

Hmmm... how can this comment be one hour old and the answer from my mechanics two hours?!

[@victorsupreme214]

@@bsvenss2 Illuminati confirmed.

[@wyattleedy3159]

"Time to restore the crank." Immediately saws the crank in half lol love this guy

[@user-hq8ep6mq9f]

Невозможно оторваться от видео. Приятно наблюдать за работой мастера, который любит свое ремесло!

[@stephanieparker1250]

I love the details you include in the video description. Very interesting to learn about where you get your items and the processes you use! 💜

[@jimmascaro2456]

Food for the soul to watch someone put the time & care into tools from a bygone era that could so easily be discarded. Its a tip of the hat to those who came before us. This reminds us that good old fashioned stick to it-iveness still is as relevant as it ever was. Hats off to you. This stuff is addictive.

[@mymechanics]

Thank you very much :-)

[@rixxroxxk1620]

I look at his items and think “there’s no way!” But I’m always amazed at the end result. A true craftsman….taking the utmost care and making the broken “whole” again. I commend you Sir!

[@mymechanics]

Thank you very much

[@SkermiebroTech]

anyone know what that black paint is

[@cktse_jp]

The craftsmanship and precision is absolutely amazing!

[@mymechanics]

Glad to hear that, thank you very much

[@andrewstanley5095]

I love when I see him using tools that I've already watched him restore like the press and the oil can. Makes it even better that they are being used. Gosh I love this guy's work

[@mymechanics]

Glad you enjoyed it and thanks for your support 🙌🏻👍🏻🙌🏻

[@nittus]

I love the "I make a new one" just like everybody. But, I also equally love and look forward to that releasing sound that the Chuck makes when he finishes a piece.

[@snowstrobe]

I was really noticing that this time...

[@CodeNameStoney]

Me too! I'm glad he leaves it in.

[@zirpel8685]

my mechanics can you do a rooomtour of your workshop, that would be cool. Grüsse aus der Schweiz

[@mymechanics]

maybe one day

[@2904Tamara]

Изумительная по качеству и красоте работа! БРАВО Мастеру! 😍😍😍

[@sreajan]

Mechanical Engineers enjoying his videos more than anyone else.

[@mymechanics]

I guess so ;-)

[@SameerPrabhakar]

This is legit therapy. Hands down the best workmanship I have ever seen!

[@mymechanics]

Thank you so much :-)

[@juanbanzai]

I don’t know how I missed this exemplary restoration, but I’m convinced you could take a bucket full of iron shavings, rocks, and dirt, and turn it into a masterpiece. MAGNIFICENT!!

[@ricashbringer9866]

Restoring those tools, really shows the craftmanship we had in the past. Great job.

[@kritz480z]

I think we’d all love to see a shop tour. That would be awesome

[@420BulletSponge]

This is the kind of work that makes me wish I had taken shop class rather than hang out with the stoners all of those decades ago in high school.

[@briebelbus1524]

They didn’t call it High School without a reason.

[@muellairmuellair]

everyday you can start a new hobby!

[@mymechanics]

Thanks for watching, much appreciated

[@n40tom]

Most stoners all took shop classes, where else would you make your own pipes and bongs.

[@thomasneal9291]

@@n40tom indeed. I had a small business going in custom plastic/metal and bamboo bongs by the time I finished my shop classes.

[@Leoppassion]

WHAT...this dude can literally make anything with his ability. Very masterful craftmanship.

[@Whom1337]

the hardest part is getting the money for all the equipment and materials

[@scipio99]

You are a great maestro who operates machine tools.

[@mymechanics]

Thanks for watching, much appreciated

[@tracyrobinson4597]

From the disassembling, sandblasting, remaking bits, bluing, to the reassemble. Your work is beautiful, and watching from beginning to ending is relaxing to, because I know when you finish the results are amazing. 🤩

[@mattdizzy5453]

One of the most complicated restorations yet, and perfectly done. I have watched a few other “restoration” channels and none are on this level of skill. You’re a badass Mr My Mechanics.

[@NeilEvansRocks]

Seriously once you’ve seen MyMechanics’ restorations all the other “restorations” just look like a dunk in rust remover and a polish. The sheer attention to detail here is incredible, removing casting marks, smoothing out every surface, inside and out - it’s just incredible. Can’t wait to see more!

[@atomicwinter31]

Watch Great Idea, they do the same style of restoration. They seriously got an old soviet bike and regalvanized the parts, remade the washers, didnt buy a single part, made everything. Also, they have a drug lab's worth of dimethyl sulfoxide

[@TARINunit9]

I honestly don't like the removing of casting marks -- I feel that changes it from "restoration" to "idealization" -- but the fact he thinks to do it at all is a testament to how much he cares

[@TitoRigatoni]

@@TARINunit9 yeah in the classic car world we refer to this as "over-restored"

[@pradityapraditya5987]

Watching all the process makes me calm ... 👍🏾👍🏾👍🏾👍🏾

[@jeffreynelson3294]

You do such beautiful work. I really appreciate and respect your work and attention to detail.

[@shadowz9260]

Hand peening, filing and blending that plate is such a hard discipline to master. As well as all the other skills you use it’s awesome to watch mate 🤙

[@mymechanics]

I'm glad you like it :-)

[@paulinebonnier3605]

0p00

[@sam_s_]

This guy cheats by having the right skills and tools for the job.

[@mymechanics]

haha good one ;-)

[@cyprusgrump]

Beautiful! The cranking handle assembly on its own was a complete work of art!

[@mrslrj1s]

It's cool seeing you use the tools that you restored . ❤

[@jessisepic8157]

I freaking love watching him use the bluing stuff. It's almost like magic how fast the color of the metal changes.

[@mateuszsarnocinski5161]

It's not magic. It's chemistry.

[@jessisepic8157]

@@mateuszsarnocinski5161 Yeah thats why I said LIKE magic

[@AboveEmAllProduction]

@@mateuszsarnocinski5161 no way.. I thought it was actual Harry Potter irl

[@umifan8426]

Does bluing can protects metal from rust in the future, everyone?

[@Damascene_]

@@umifan8426 I think it does protect from rust

[@meaninthemirror]

Satisfying to watch when a perfectionist doing a restoration.

[@mymechanics]

Glad you like it :-)

[@omtpetra5417]

@@mymechanics u

[@AnkurPandeyef]

You know, metaphorically, I imagine angels to be restoring my broke rusted spirit the same way this guy restores these tools.

[@krob5375]

Had no idea hammer drills were that old, that's crazy. Great work.

[@mymechanics]

Glad you like it :-)

[@RescueRestore]

All I want for Christmas is to watch My Mechanics!

[@mymechanics]

There you go ;-) Thank you very much

[@1Thornado]

You two are my favorite KZbin channels 😍😍😍🥰🥰🥰

[@somyRed]

What about you Rescue & Restore? Do we get a video from you for Christmas?

[@21nd]

I’m in the same boat with you!

[@CoolRestorations]

@@mymechanics We need more videos!!!!🛠🛠🛠

[@wonderwu]

If my mechanics had his own tool line, with his level of craftsmanship, I would want to gather a set! This guy not only has to know all of the wood and metal working, but he learns the way every single new mechanism works. Down to the point that he understands which parts need to be exactly which size. Especially when he has to completely make a new part of it. I love when he shows an old beat up part, and then the next scene says "I make a new one" and that's it. It makes me laugh to myself! Keep up the good work, friend!

[@HAL-zh1kf]

How is it possible for 23K people to dislike this video? The restoration was remarkable and his skills are incredible. Even the videography was superb. If this level of expertise doesn't impress you then nothing could.

[@buddhull3657]

How can you see dislikes

[@HAL-zh1kf]

@@buddhull3657 There is a Chrome extension that restores them.

[@brabhamfreaman166]

That arbor press is as beautiful in operation as it was in restoration

[@Zoso14892]

"This is a hand cranked hammer drill" no it's not mate, its a pile of rust and twisted metal. Thst might be what you turn it into but damn was that damaged!

[@mymechanics]

was a hand cranked hammer drill* ;-)

[@avandras]

Yeah, I was wondering if it was buried in a sand pit and then a truck fell on it

[@jxavier3876]

This comment is like you are being arrogant for him, lol so weird.

[@DigitalMage]

You are an amazing machinist. I loved watching the process of machining new parts to replace missing and damaged parts. The care you took to even smooth out casting defects is amazing. Looking forward to seeing more of your videos.

[@trackboy17]

Yea most creators who restore would stop there or restore it as best as they could with rust remover.

[@richdeering9580]

I like watching things being restored. I once had a sweeping broom. It served me well for decades, because I looked after it. I replaced the handle 17 times, and the brush head 22 times. Yes, that sweeping broom served me well.

[@mymechanics]

nice story! ;-)

[@gustav0gans]

Really, really good work! Watching you restoring, is like listening to a symphony.

[@tharealjkd]

love the camera quality, everything looks gorgeous

[@mymechanics]

Thanks so much

[@SteefaTak]

@@mymechanics A new lens maybe ? Also the editing look's much improved this time or it¨s the close-up view ? Look's amazing ...

[@humanbeing_]

​@@SteefaTak I think it's merely more use of super close-up views. Because he's been shooting in 2160p for a while now, which is 4k. What that allows for, is super tight shots via editing without zooming in from the actual camera itself. Many people don't realize "4K" is literally _4 times the resolution_ as 1080p. So you can fit 4 1080p frames worth of shots: top-left, bottom-left, top-right, bottom-right. So not only does it make full-screen quality look more crisp & sharp even when watching on a 1080p panel (Monitor/Screen ;) but it allows for those really close shots without any loss of detail/clarity whatsoever - Because you can zoom way in close, and essentially still (only) have a 1080p picture. There's no graininess or pixelation or fuzziness, like what happens when you digitally zoom in from a smartphone camera. Long answer I know, but the first thing I do on every video is go from "Auto" quality to the highest resolution offered by the creator/video. My Mechanics has always had amazing framing & fantastic editing style from the very first video. Kinda crazy he's just always been that good.

[@mtronaut1694]

Little did that young hand cranked hammer drill know when leaving the factory in 1932...

[@doloresmallia6516]

I love the way you work. You're so talented. And the best part of the video is that you showed us how they work. Thanks for sharing this video with us.

[@user-bf6jw9yr9u]

Так. Не удержался и решил написать комментарий. На это просто очень приятно смотреть и слушать. Прям успокаивает нервы 😊😌😌😌😌😌

[@williamwallace9826]

I think this has to be one of your best restorations yet. Absolutely spectacular. I stand (okay, I sit) in awe of your ability to restore these things.

[@grantc8369]

We really need a word other than "restoration" for this. I'm certain he returns these tools to a condition far better than the original.

[@Albanian007BK]

Amelioration

[@WeaselGreasel]

Homage to the things that lasted a lifetime.

[@flashgordon6238]

my Mechanics "Re-Creation"

[@ytwos1]

@Bailey Hatfield Yes, but this tool clearly was not super high grade when it was made.

[@DanishMonday]

Does anyone love watching people restoring old crap and be amazed

[@luke_fabis]

Really cool to see that restored arbor press return to help with a different restoration.

[@geronimon2298]

Accidentally watch this till the end and i dont even regret it

[@mymechanics]

Thank you very much, I really do appreciate it :-)

[@gagebagaso9443]

I wish I got to see it in action

[@ruebenneveling6924]

if I could do this kinda stuff id be so fulfilled. This guy really has a gift.

[@ImGoingSupersonic]

Or a shxtload of practice?

[@zenaasura1769]

@@user-hc5nh8kv7g yes but no. We all have our own purpose in life. And fulfilling that and living it is the best feeling in the world.

[@zenaasura1769]

I would say go for it you have nothing to lose.

[@suffer1418]

@@ImGoingSupersonic everything comes with practice your not just perfect at anything really so this is definitely a talent and his purpose most likely

[@sileto8564]

@@zenaasura1769 00

[@user-fn8bi1ql6w]

كمية الأبداع في اشرطة الفديو الخاصة بهذا الرجل غير محدودة شيئ خيالي ولا مثيل له

[@mr.Mikeyboy]

I remember both my grandfather and father talking about using these when they were in the trades ..now we got cordless hammer drills lol thank god! Great work!

[@peaceninja8918]

This is why I like my mechanics, they're legit items that look like they were bought and then just literally restored, not an item bought new and then chucked in some water for a few months until it's so rusty and orange that you can't even tell what it is. "Rustiest knife in the world restoration 😲😲🤯🤯😱😱" like come on.

[@mymechanics]

much appreciated :-)

[@Kepler_2258]

I love how he uses things he has resorted to restore more things

[@mymechanics]

me too :-)

[@Belisimoo]

He uses the restoration... to do the restoration

[@borisaustria4301]

"I used the restored tools to restore the tool." -Restorer Thanos, probably

[@ian.lwilson7156]

Totally brilliant! I love the way you use the correct tools.