Anvil Modification of the new Parkside Performance 12V Torque Wrench PPDSSA 12 A1

#ErCanEverything #Upgrade #Parkside
In this video I will replace the genuine Anvil of the 12V 350Nm Parkside Torque Wrench PPDSSA 12 A1 with 1/2 which has a 6.5mm Hex Socket
📌Impact Wrench Shaft (Anvil) Link
s.click.aliexpress.com/e/_EvK...
• PARKSIDE Angle Grinder...
• How to Increase Power ...
• How it Works Impact Wr...
• PARKSIDE 226Nm Cordles...

[@saimon1409]

Super. Taky jsem si objednal a předělám si to. Paráda 🙂

[@lechtigarsdunord]

Bonjour, félicitations pour le soin et le travail apporté, très belle présentation de la vidéo, rien à dire c'est juste parfait !! 👍👍 Bravo et Merci pour le partage de cette vidéo. Bonne continuation à vous. 👍👏

[@ErCanEverything]

Thank you very much and I'm glad you liked it my Friend😊🤝

[@memutu]

Nice one and we apreciate the effort, especially that you cand find that anvil on ali, but that one needs a bushing on the case from 18mm to 16mm. Good job!

[@ErCanEverything]

Thank you my Friend There is no need for a second bushing because both anvils are 18mm😊

[@memutu]

@@ErCanEverything i saw that, i was talking about that one one ali

[@KHOAIHOANG81]

That Good and Number one for you. Thanks for That My Friend ❤❤❤👍👍❤️❤️

[@ErCanEverything]

Thank you my Friend😊🤝

[@user-lo7ji9bc9l]

좋은정보 감사합니다

[@ErCanEverything]

Thank you my Friend😊🤝

[@user-mx7uy8uh1c]

Excellent

[@ZoltanBorsoDiY]

This machine was recently in Hungary, but I couldn't buy it, it was sold at a good price and sold out first. The video was good, congratulations! 🍻

[@ErCanEverything]

Thank you my Friend🙏🤝 It has not yet appeared here either, I asked a friend to order it for me from Belgium.

[@cristiancristian4871]

Lam cumpărat din Germania pe lidl online, cu încărcător și acumulate ce 5 și unu de 2 amperi a costat 156 euro.

[@user-yu8ez8mv9n]

سلام

[@user-yu8ez8mv9n]

برافروش دارید

[@nelchan2421]

excellent

[@ErCanEverything]

Thank you 😊🤝

[@Dime_Bar]

Here comes the wobble, wobble, wobble, wobble buttery biscuit base.

[@chungtran7563]

😮yes okay 👍 man ❤❤❤❤❤❤❤❤❤❤❤❤

[@nursaitaksu-yt1nr]

👍👍👍👍

[@ErCanEverything]

Teşekkür ederim Dostum😊🤝

[@igotbricotools2035]

👍👏👏

[@giorgostatarakis3165]

does that work for the bigger one? because if you loose the front clip, sockets simply fall out

[@sergiobarros5619]

muito top

[@narzedziagarazowe]

Przyjacielu zrobiłeś to bardzo dokładnie, pamiętaj, że oryg kowadelko ma oring ,który niweluje luz, zaś zamiennik nie ma i jest luźne. Po moim filmie poprawiłem to i przełożyłem oring do zamiennika pogłębiając kanał.

[@ErCanEverything]

Thank you my Friend😊🤝 I thought about it too, but I don't have a lathe to make groove, so I asked a friend just to make the rear bushing.

[@tez1954]

Hey! Nice job i would definitely modify mine, I've seen people here selling this anvil as a kit for the bigger impact driver. I was wondering if there could be a way to modify the cordless hand air blower (palp 20 Li B2), mine burned days ago and i was thinking if i should use the warranty but i noticed this is being sold with a brushed motor with no ventilation, i saw it uses a Rs550 motor and i was planing to switch that with a 3660 brushless motor (since they are almost the same size) with a 20-40A ESC driver but I'm not very experienced in doing such things 😅 do you think it could be possible?

[@rwdkai]

I wish parkside did this from the offset.

[@M3S3RIASU]

Waw 👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@DjaniAgain]

Now I'm wondering 🤔 Why they doesn't learn something from you and implement that on newer models 🤔 As always greatly modified and this tool is twice more versatile. 😏 Good work Brother ✌️

[@ErCanEverything]

I don't know Brother🤷 and we always have to teach them😂

[@DjaniAgain]

@@ErCanEverything😅😂🤣

[@MonkeyBlueAss]

Because clone makers don't think too much

[@ErCanEverything]

@@MonkeyBlueAss 😂

[@KevinCaldara-ex9io]

Why you used a wall drill bit and not one for steel?

[@danieljerloew]

wish it was 3/8 with hex adapter :-(

[@FixitEasyDIY]

Parkside fans like that 😊

[@ErCanEverything]

I also🙂😁

[@tomaszdabrowski5087]

Where to buy this "performance" series?

[@bahadryldz2346]

Değişiklik sonucu tork zayıflar bence dönüştürücü adaptör kullansan daha iyi olurdu

[@ErCanEverything]

Bence de biraz zayıflama payı var ama jant somunlarını hiç sorunsuz çözebiliyor.

[@bahadryldz2346]

@@ErCanEverything aynı sorundan bir arkadaşda sıkıntı yaşıyor ondan biliyorum tork belki %25 düşüş oluyor

[@oldboy5000]

Das Problem ist das der sechskant nicht gut hält und das nervt auf Dauer ich würde lieber einen adapter nehmen

[@doctorzvingo9321]

video about to make it less compact and less powerful 👍

[@terryb9851]

Has anyone tried to fit a 3/8" anvil to this ?

[@erudio9533]

Is this 12V tool better than the 20V version? (PDSSAP 20) Why should people prefer this 12V tool indstead of the 20V one?

[@MrDKPhil]

12v is lighter , but never as powerfull as 20v with bigger battery. for small job 12v is ok

[@0rtmasta]

No conformal coating wtf. Any moisture ingress and it’s throwaway

[@user-vv2hx9pp4w]

My brother, I am from Iraq, why do you have so many holidays on Parkside?

[@igorshevchuk77]

Вопрос- "А зачем все эти переделки?" Гробить один инструмент заради переделки "круа в квадрат"

[@ich5460]

Con un adaptador terminas antes.

[@SW-ot7bf]

Five-year warranty RIP 😂

[@davidfps18]

How will they know? Just reverse the process and you have warranty again

[@ErCanEverything]

What is the need for a warranty on such a cheap tool?🤷 I have not done anything to the original parts and I can return them to factory condition🫅

[@SW-ot7bf]

​@@ErCanEverythingBecause this is one of the advantages of these tools. For some people.

[@SW-ot7bf]

​@@ErCanEverythingCheap. No spare parts. And when it breaks, it's just garbage.

[@MonkeyBlueAss]

@@SW-ot7bf 2 years warranty

[@Yusuf_Demirci]

türkmüsün sen la dırzo ?

[@mareklis4519]

Po co ten cyrk skoro jest przejściówka z klucza 1/2 na sześciokąt 1/4 z kutej stali. Tak samo jest przejściówka 1/2 na uchwyt wiertarski.

[@zefautino]

What would life be like without parkshit? BETTER.

[@user-yd9qx9mq6u]

What would life be like without you? MUCH BETTER.

[@zefautino]

@@user-yd9qx9mq6u Wrong. Boring.

[@user-yd9qx9mq6u]

@@zefautinoask your mom, she will confirm it

[@zefautino]

@@user-yd9qx9mq6u I just asked your mother, you're not my son. What a relief. I don't have a twat for a son. Your mother sends kisses to you. FFS, she's definitely your mother, only a mother could care about such an aberration as yourself.

[@VirtualTransformer]

BOSCH

[@sebas5688654]

Я так и не смог понять суть переделки. Вы заменили ответную часть молотка, которая была выполнена из высокоуглеродистой стали. Высокоуглеродистая сталь препятствует скручиванию вала, что сохраняет крутящий момент. То есть вы снизили силу ударного момента, заменив деталь. Всё.

[@hunch385]

А с чего Вы решили, что он установил деталь из низкоуглеродистой стали?

[@sebas5688654]

Насколько мне известно, низкоуглеродистая сталь отличается от высокоуглеродистой цветом. Я делаю предположение, что чёрная сталь -- среднеуглеродистая (0,2-0,6%), а серебренная -- низкоуглеродистая (0,08-0.2%). Возможно, я допустил некорректность, назвав среднеуглеродистую сталь высокоуглеродистой.

[@warmacedon]

When I see someone modify/repair parkside few brain cells are dying in me , why waste your time on a machine with no name battery and 0 replacement parts for it ?

[@BrokeLifeEU]

Because we can’t afford any better 🤔 and the fact that a tool is built to be thrown away after it dies does not mean one should do that!

[@warmacedon]

@@BrokeLifeEU depends whats is “afford” for you . I bet this useless “machine” its cheaper 20 to 50 % than Makita or Bosch, with those Machines you will have 3 year warranty and battery with Samsung/LG cells compared with parkside no name cells is win . Even after warranty spare parts for them are affordable. Plus I bet that every well know brand ( dont talk about expensive brands ) even one Ryobi is 100 times better quality ( maybe they are in same price group as parkside ) so yes cheaper its never more affordable

[@Alex-uh1mj]

About 15 years ago during the financial crash i lost my job, I started my own company and all i could afford were tools from lidl. When i sold the company 6 years later they were all still in use and working. Some parkside tools are poor and some are amazing value for money.

[@Vinbenzinli]

milwaukee yi kopyalamışlar

[@KevinCaldara-ex9io]

Why you used a wall drill bit and not one for steel?

[@KevinCaldara-ex9io]

Why you used a wall drill bit and not one for steel?

[@KevinCaldara-ex9io]

Why you used a wall drill bit and not one for steel?

[@florianb.4618]

Easy to miss, the part he drills in is hardened steel a normal “steel” bit wont work because it will be too soft. The “wall” bit as you call it has a carbide tip that’s harder than the hardened steel part and therefore able to drill into it.