Concrete BEAM Construction Process, Traditional Timber Formwork, Reinforcement, Beam Shuttering Work

#ConcreteBeam #TimberFormwork #BeamShuttering
Reinforced concrete beams are structural elements that designed to carry transverse external loads. The loads cause bending moment, shear forces and in some cases torsion across their length. Moreover, concrete is strong in compression and very weak in tension.
👇 SUBSCRIBE TO Aperture Of Construction KZbin CHANNEL NOW 👇
/ @apertureofconstructio...
Subscribe and share videos for me. Thank you.
Construction Tools : invol.co/cl2kjbv
Video Edit Software : invol.co/cl2kjcv

[@apertureofconstruction1739]

👇 SUBSCRIBE TO Aperture Of Construction KZbin CHANNEL NOW 👇 kzbin.info/door/P_Az1G815pZLYCkYhrssIA

[@lalnuntluangaralte3329]

No Pilar..

[@reynaldoroy1067]

Why the inside of the ilongated box made of plywood no steel frame The steel frame is only place on top of it. How the concrete become sturdy since no steel to reinforce it.

[@civilengineeredge]

kzbin.info/www/bejne/n2iVc5x6h6ylh80

[@이니S]

​@@lalnuntluangaralte3329 시멘트

[@mdchandkhan7212]

​@@lalnuntluangaralte3329ś🎉đ😂😂þ1i

[@archcos]

I think this is not a proper procedure in concrete pouring the beams first exposed the top bars which will lessen the cross section area of the beam, that top part will be mostly for slab and doesnt have a monolithic design for slab and beams.

[@apertureofconstruction1739]

Good Evening , The method of application is use for floating structure especially for Fishery Jetty.

[@pipeds9979]

This is true. The construction manager for this project is stupid

[@rafaelmolina123]

You're correct. This is not the right way. Some contractors just love short cut and never thinks about the quality or integrity.

[@joshdaly2343]

If it has been designed to be poured in two sections, then who is to say that it's the incorrect method? If the reduced cross section of the beam is enough to support the slab weight while it's poured, and the vertical bars sticking out of the beam are able to resist the horizontal shear forces due to the non monolithic design, then I can't see any problem with this.

[@pipeds9979]

@@joshdaly2343 trying to sound smart but its actually being stupid. Try to read the whole NSCP before you comment.

[@kmjandrews3312]

How many floors ?

[@apertureofconstruction1739]

Only 1 Floor.

[@cesarcacayan6916]

Noticed : Stirrups hook used is 90 degree instead of 135 degree hook.

[@Aklantvchannel]

And so?

[@pipeds9979]

@@Aklantvchannel do you want to displace your main bars before it can reach its yielding point? Cause thats how you do that.

[@Aklantvchannel]

@@pipeds9979 so what is the connection of my comment into your comment?

[@pipeds9979]

@@Aklantvchannel clearly your brain is damaged. You might want to have that checked up.

[@Aklantvchannel]

@@pipeds9979 and your brain too. You need to call up a doctor to check your empty brain.

[@liboy9844]

Maybe not critical for the slab project but the stirrups (lateral ties) are not at 135 degree specification for seismic resistance. Otherwise, neat and nice construction.

[@Aklantvchannel]

You need to know the location first before you comment. Not all over the world has a seismic. Only applicable your 90° hook for for those location where has a seismic and earthquake place.

[@liboy9844]

@@Aklantvchannel With a better understanding of ‘continental shelf movement’ scientists nowadays can no longer predict which places will experience earthquakes and which will not. Let us not be complacent about how safe we are from earthquakes, floods and typhoons because we now know the earth is constantly changing. One proof is once ‘extinct’ volcanoes declared to be dead or inactive have now become active. Tremors are now being observed in known earthuake-free areas. So in construction, it is better to be on the safe side.... besides, the cost difference fron 90deg to 135deg is minimal isn’t it? 😉

[@Aklantvchannel]

Big difference in cost, if the project cost is 1 billion from 90° to 135° you've minimized the cost effectively, let say 0.01% of the total project cost you have been saved not bad.

[@이니S]

​@@Aklantvchannel 시멘트

[@r.scontruction5239]

Rs contraction

[@divinegraceengineer5153]

Totally Wrong......The Joint between Beam and Slab is Not Acceptable like this.

[@diamondcentral4411]

Escuela de Diamond Central le ofrece OSHA, SST10h full prevention , Flagger- banderas, Silica y Scaffold clases en español Direccion: 40-10 National St. Corona NY 11368 Tren 7, parada 103 Corona Plaza. Telf: 646-355-8895 / 646-666-8787 🚧👷

video good #hongappollo video hay a

[@apertureofconstruction1739]

thank you 🙏

[@ForensicCats]

Your stirrups are not fully developed / 135 degrees.

[@Masdik99CJDW]

Tata letak yang bagus diawal sangat menentukan kedepannya. Mantull. Mantab betul

[@jomaabuel1048]

I guess there are many critics/experts commenting here...lol

[@apertureofconstruction1739]

yes 👍 you are right ! welcome to my channel thank you for your comment

[@NubianRider]

It was Marcel Duchamp who said, "Not everyone is an artist but everyone is a fu@king critic." The fact is, opinions are like assholes, even the dumbest MF has one. - And that's keeping it 💯 real.

[@JellyBean-vs4dw]

This video provides such valuable insight into the concrete beam construction process! Exploring the Buildovate CRM for assistance in managing construction projects similar to these might be a good idea!

[@apertureofconstruction1739]

thanks for your advice.

[@Genivaldoconstrutoroficial]

Canteiro de obra fantástica

[@apertureofconstruction1739]

GENIVALDO CONSTRUTOR OFICIAL, Thanks for visiting.

[@ArquiteturaeEngenharia]

Likeeeee

[@fredricful]

Vor er skrå armering i dragerene og vorr er søylene under det dere har støpt? Vordan blinne hjærn nor enklinga og dobling står oppmontert?

Công trình hoành tráng qúa.

[@apertureofconstruction1739]

cảm ơn bạn hãy thưởng thức và chia sẻ

[@atokonstruksi1714]

Mantap konstruksinya 👍👍👍👍👍👍🙏🙏🤝sukses sll leke

[@apertureofconstruction1739]

Terima kasih

[@willianchoez5880]

Que vale una moldura pree fabricado

[@serafinbaarretoespinoza1323]

Lo correcto ubiesen baseado todo junto .no por parte.vigas peraltadas y techo

[@apertureofconstruction1739]

Las losas suspendidas son losas que no están en contacto directo con el suelo. Forman techos o pisos sobre el nivel del suelo. Las losas suspendidas se agrupan en dos tipos: losas unidireccionales que se apoyan en dos lados. losas bidireccionales que se apoyan en los cuatro lados.

[@azaimamini6152]

این کار در مقابل زمین لرزه در چار ریشته کلا تخریب می شود از قسمت سر ستونها طراح خیلی بیسواد بود

[@apertureofconstruction1739]

کشور من در منطقه و سرزمینهای استوایی واقع شده است هیچ زلزله ای در منطقه من وجود ندارد. بنابراین از نظر طراحی متفاوت خواهد بود

[@carlossouzaconstrucaodeesc7750]

Gostei

[@Justcaa7686]

Hello Im from indonesia , 🇮🇩 Like

[@apertureofconstruction1739]

hi 🙋‍♂️. semoga u saksi video gembira

[@carlossouzaconstrucaodeesc7750]

Bom trabalho

[@yelitzabravo6016]

Beste mensen, aantrekkelijk samen werken, ik geef 10 van 10, met vriendelijk groet vanaf Nederland.

[@jacobhatim761]

اللون الباهت في الخسانة أعتقد أنها جائت بفعل مياه زائدة أثناء الصب وذالك نتيجة انتقال المضخة من مكان الى مكان اخر وتلك المدة التي تقضيها تعزل الماء في الاعلى واذا لاحظتم أن هذا اللون تكون في منطقة واحدة وهي بداية الصب في كل صف والملاحظة الثانية هو امدادات الأعمدة غير كافية

[@apertureofconstruction1739]

jacob hatim , Appreciated for your comment

[@ابراهیماعظمیمهراباد-و8ب]

خیلی عالی.❤من هم در همین کار هستم . لطفاً بفرمایید اندازه بتون بعدی که ریخته خواهد شد چند سانتیمتر هست ؟خسته نباشید ممنون.چرا از انبر استفاده نمیکنید ؟برای سرعت عمل انبر خوبه،✋👍

[@samuelsam6383]

it turns out that overseas there are people working masons too, right?,, Good job,, 💪

[@apertureofconstruction1739]

thank you for your comment. yes, you are right ! this kind of work need manpower only can contribute.

[@marbinbarrondo8085]

A MI ME ENSEÑARON QUE LOS ESTRIVOS VAN EN ASPIRAL Y CON GANCHO

[@dronachaudhary]

Column rebar are too short, there is not enough anchorage length

[@ayemyintwin8921]

ထုပ်ကတသားထဲမဖြစ်တော့ဘယ်လိုလုပ်ကောင်းမှာလဲ စံနစ်မကျဘူး

[@emeraldbando6849]

Ang lalaki ng beam subalit ang liliit ng poste at bakal ng poste! Madali iyang guguho kapag may load na at kaunting lindol

[@apertureofconstruction1739]

galing kami ng malaysia, walang lindol dito. lahat ng Beam ay dinisenyo ng engineer

[@timberland1118]

civil engineer ka ba?

[@asimshahzad1339]

2 mistake in steel 1 coloum steel lap Beam bottom bar is not properly fixed

[@lifetv2230]

The colum so small

[@apertureofconstruction1739]

There is no column. It’s using Steel frame building Structural .

[@roberterlano3215]

It's a continuous tie beam

[@newbie704]

Many wrong from rebars to pouring, cold joints are made because beam slab is not monolithic, it will not also act as t beams, and not all beams has the same neutral axis because not all elements has same moment capacities, stirrups are also wrong for seismic purposes

[@jhunmartv5733]

Mahirap yan ganyan na nauuna ang porma ,masganda kung naasemble muna ang bakal maraming sagabal

[@eleazeradrias4341]

can we really choose the beam and slab poured on two sessions? not monolithic?

[@YusronhadiNugroho]

Konstruksi yang keren sekali, saya pernah bertanya kepada insinyur saya apakah mungkin membuat gedung 5 lantai dengan proses pengecoran 5 lantai sekaligus tanpa scafolding ataupun penahan ke lantai kerja ? Jawabannya tidak bisa, saya bilang bisa, harus mengikat ke kolom, untuk di buat formwork gantung, setelah sekian lama saya mencari literasi di youtube tentang formwork gantung, akhirnya saya menemukan video anda... great job bro, anda meyakinkan saya untuk bisa melakukan proses tersebut...

[@LanhNguyen-ek3hv]

Thoi nao roi vay troi

[@bedatmancing01]

Like dari indonesia kawan 🙏🙏❤️👍

[@khemaconstruction369]

Good work 👏

[@Mr.Humble888]

May mali sa proseso dapat monolithic ang pagbubuhos ng beam at slab, pirmis magkakaroon ng vibration yan

[@Fredflinstone23]

The one thing is saw on this was the rebar doesnt extend pass through column.. if the intent was to have 2 floor above this structure, i would be terrified cause there isnt enough overlapped between rebar on the column of foundation and the floor above.. on the other hand, if this is only supporting slab and no column passing through this slab, excellent job

[@farhadkpk430]

Canstruction video channel Farhad kpk

[@apertureofconstruction1739]

Appreciated for comment :) Hope you help to share

[@dedeherdiana3575]

Pengecoran plat lantainya tidak seksligus dg balok betonnya? Saya juga lagi punya bangunan, tspi pengecoran plat lantainya mau menyusul.

[@BLNBorey]

Wow amazing Construction work Project work

[@poparafael3065]

Is there any project blue prints made for this building?

[@apertureofconstruction1739]

No. It’s custom built by land owner. It’s 3x load than it’s structural

[@xbchen4030]

This skill and work efficiency will basically be unemployed in China, which is crazy about infrastructure construction

[@engineerajaytech6469]

Sir Good

[@apertureofconstruction1739]

Thank you Sir. Hope you like it

[@engineerajaytech6469]

@@apertureofconstruction1739 sir I am also civil engineer Keep support my channel

[@cscsamsung9749]

ที่ผมเรียนมา ทำดังที่ถ่ายภาพมาให้ชม ตามลำดับ เพราะอายุเสา คานมีอายุการบ่ม ที่ต้องใช้ระยะเวลาการรับน้ำหนักของโครงสร้าง..

[@code21808]

Hindi sya matibay. Hindi bou ang flooring at beam dapat isang buhos lang yan.

[@waterbros6450]

El acero primero ce arma antes dponer las formaletas d los costado mas facil i práctico la intalacion ddl acero saludos d nicaragua

[@apertureofconstruction1739]

En primer lugar, gracias de antemano. gracias por tu orientación Voy a prestar mas atencion Continúe viendo mi video

[@jdjamar1]

Gostei do seu vídeo, velocidade normal. Me fale onde fica esta contrução. Brasil, São Paulo-SP

[@themarast]

why are stirrups not bended in 135 degrees?

[@ddtrujillo3617]

Cuánto tiempo se demora para desencofrar ???

[@apertureofconstruction1739]

Tomamos 1 semana de duración para quitar todo el encofrado después de que se colocó la losa de concreto.

[@LanhNguyen-ek3hv]

Ko cdu cp hay sao vay bay

[@XilemHandmade]

I guess , that will need a lot of money 😂😂

[@apertureofconstruction1739]

Fishery Jetty need quite a budget to build it

[@davidbruce5377]

Malaysian builders - nice work boys!! Come to Philippines for my project!!

[@moustaphakane1979]

This is art. Am an aggie so I have no advice for you. Where are we? Love from Senegal 🇸🇳.

[@rogersantiago2707]

Excellent jobs... Congrats... 🇵🇭🇵🇭🇵🇭

[@newbie704]

Excellent? Hell no,shame on you if you are an engineer in your country

[@emkumarchetry1053]

Bhim me compaund selep keisey logaye yaniki xatt me

[@apertureofconstruction1739]

tak faham perkataan anda

[@SG-uh6sw]

It has engineers and engifars the engineers don't comment on KZbin videos they have much more important things going on in their lives

[@badbigbang]

There are segregation of concrete

[@wakiyun]

Dimana ini bos. Pekerjanya berbahasa Indonesia.

[@apertureofconstruction1739]

Di Malaysia.

[@yogeshnanavare9586]

What is the reason of 70-80% concrate of beam ??? Not for full beam concrating??

[@apertureofconstruction1739]

To connect with Suspended Slab which on top of the beam.

[@yogeshnanavare9586]

@@apertureofconstruction1739 thanks

[@apertureofconstruction1739]

@@yogeshnanavare9586 you may follow my channel and view my other video which continue with the slab works. You May refer to my other video Thank you

[@yogeshnanavare9586]

@@apertureofconstruction1739 ok

[@lucasf.v.n.4197]

I was wondering about that as well

[@Konkonnbaan]

Good jobs

[@khoperator478]

this is the standard project

[@apertureofconstruction1739]

KH# Operator Appreciated the comments, thanks a lot

[@bertdumanni4987]

Hello bossing, ganyan ba talaga ang pagconstruct ng beam na hindi buo ang mabuhusan? Ano ba ang purpose ng nakalitaw na bakal?

[@dexterasistores7008]

Mas matibay talaga ang Monolithic sa pag bubuhos.kaya lang magagastusan ka talaga kasi isahan ang pag bubuhos ng mga beams,poste,hagdanan,at slabs.

[@johncantor106]

For Me Po , Pumanhin sana Monolithic Construction Po.

[@jrboyles4445]

Is there a loss of strength if the concrete pouring is not monolithic?

[@apertureofconstruction1739]

The slab are 8” thick and there are construction joint before the slab.

[@pipeds9979]

Yes there is. It is not allowed to have your beam not fully concreted

[@mujijayanto784]

Kok akeh gagake toh mas

[@apertureofconstruction1739]

Thank you ! Very Much !

[@RU-ei7bc]

👍👍👍Very good construction 🤣👍👍👍

[@DmitrievStroy96]

👍👏

[@apertureofconstruction1739]

Thank you for your support

[@roberttelasco4881]

Map gade kofwaj la fèt de bò koman fè a mare

[@Masdik99CJDW]

Kalau penalian bendrat seperti itu saya kurang setuju.

[@algabron4281]

Pakai Spunpile saiz brapa?

[@apertureofconstruction1739]

250mm

[@vinnochittro3298]

ওকে ভাল

[@apertureofconstruction1739]

Vinno Chittro, Thanks for the comments.

[@cheikhndoye670]

Félicitations vraiment ce le meilleur

[@KiKi-pn7is]

👍👍👍👍👍👍👍👍👍

[@enzonoel1985]

Ami me gusta esos tipos de trabajo felicitaciones.

[@apertureofconstruction1739]

Muchísimas gracias

[@ivervicenteduran6903]

Quero.ver.la.pantalla.de.gradas.lo.que.costruyen

[@asimshahzad1339]

Beam concrete casting is very good

[@iriiriiriiri8531]

Ini banguna biar aq bisa tau kegiatannya gais sekeluarga okey lanjut........

[@firstnamelastname1687]

concrete structure build on top of wooden footing

[@minhbanhbao3895]

Ghép dầm +sàn tầng hầm đẹp và đúng qui trình

[@BangMandor46]

Good amazing construction thank for your

[@maxdrawing9436]

Very good presentation video. I like it let's be friend.

[@ghadman1061]

Brilliant!

[@GreyspaceEngineeringServices]

good informaion

[@apertureofconstruction1739]

Thank you 😊

[@mezuu-yj6rv]

Why they not do back filling before making of beam????

[@jhovz862]

Dapat inuuna nyo bakal pinapahirapan nyo ang sarili nyo

[@apertureofconstruction1739]

Salamat sa iyong payo

[@jomaabuel1048]

Sa actual works in building construction, di maiiwasan minsan ang taga formworks group ay nauuna sa rebar groups, kaya dapat may option ka din both scenarios, mauuna ka or mahuhuli man may alternative method...

[@apertureofconstruction1739]

Maraming salamat Pinahahalagahan na nakatulong ka upang dagdagan ng paliwanag ang aking mga video

[@jomaabuel1048]

@@apertureofconstruction1739 it's okay..welcome

[@jaycabillan8872]

Be Wise GOD is True. 🙏😁❤ . . .🕊 GOD'S BLESSING. ☺️

[@Asr129]

Direct agar dhalayi ke saath karte to kya dikkat thaa

[@nurdintutorbangunan9362]

Sepropesi sy dulu waktu kerja di luar

[@fullervlog9192]

woods cost 2 million think

[@bkvrao__advocate33]

quality material in construction works is important. No single iron road, cement was used in the construction of Charminar, Golconda, tajmahal. But nowadays, due to using poor quality of material, the age of buildings is less than twenty years only.

[@kcpkcp1000]

Why don't they erect the steel column first, then cast the beams and slab together?

[@thetruemaker29]

i think less strength on solid rectangular concrete with reinforcement on the top bars

[@zatus21]

whose structural engineer allow that casting 70% on the beam?

[@LanhNguyen-ek3hv]

2021 nha

[@3davila891]

para cuantos pisos

[@3davila891]

soy maestro de construccion tus video me han servido mucho, gracias.

[@apertureofconstruction1739]

solo 2 pisos, altura total = 28 pies

[@apertureofconstruction1739]

no te preocupes, no es nada Espero que puedas ayudar a compartir mi video para ganar conciencia.

[@lisajidin3660]

Itu yg kerja tka indonesia

[@apertureofconstruction1739]

Ya . Tolong share kepada kawan

[@creativityshow7566]

Wow good job 👍

[@apertureofconstruction1739]

Thank you! Cheers!