Suspended SLAB Construction Process | Traditional Timber Formwork | Steel Rebar + Concrete Process

[@apertureofconstruction1739]

👇 SUBSCRIBE TO Aperture Of Construction KZbin CHANNEL NOW 👇 kzbin.info/door/P_Az1G815pZLYCkYhrssIA

[@murahrezeki2726]

klu lantai slab rumah pakai camni jugak ke

[@ramsaranbasnet6050]

Thanks Sar I Look From Kathmandu Nepal

[@Nick32176]

oil is used so the form work will not stick to the concrete but i can see that most of the rebars are also soaked with the oil. They should use the plastic wrap on the forms while laying the rebars.

[@pundatomacasimbar9310]

I just want to ask if the effective depth of the beam is observe otherwise the strength of the beam according to structural design is affected.

[@hasbzakhasbullah5088]

ini projek utk port ikan kt batu maung peneng ka.briliant new style contruction...

[@sitikhadijahmokhtar3091]

Hi... warna hitam yang atas plywood di formwork tu apa ye?

[@syedmurai]

Minyak engine dah digunakan

[@apertureofconstruction1739]

Untuk Jaga Formwork supaya tahan lama & boleh pakai lebih kali

[@apertureofconstruction1739]

Ya , betul tapi tambah Diesel , USED ENGINE OIL.

[@mazlanhashim9340]

Hi bossku.. plywood 9 mm blh pakai tak beside 12mm utk buat formwork

[@apertureofconstruction1739]

Not recommended. 12mm boleh pakai ulang 2-3 kali. Terlalu nipis senang rosak, pecah, maksudnya tak tahan lamaZ

[@halalmeatshophk]

it is very interesting to see that concrete beam are made prior to casting slab. i suppose this can reduce labour workload per day and also benefit from a sturdy beam to support the slab pouring. But an important question, is it as strong as the beam+slab that is poured together at the same time? if not, then what other extra procedure are necessary to be taken to improve the bond and strength?

[@jaumetolentino5339]

Great point of observation there. Actually it will not be the same if casted monolithically, there is a good reason to that based on the formula in getting the moment. Most contractors always used this method.

[@dekonfrost7]

Listen this is a better pour, this is how it was dont through the 1960’s in america. What people dont understand is how rich america is in talent and resources like wood timber and germans and Scandinavians and Africans are big people. Capable of muscling concrete. To pour monolithic beam and floor you need pumps and better concrete mixes and additives that are simply not available in developing countries. Also the supporting structurs like beams cross beams and posts are tremendous. This is good work, really respect these guys the bar was well set and chair railed. Form work really good.

[@halalmeatshophk]

@@dekonfrost7 I wonder of this type of construction first pouring beams and later slabs is still taught with load calculations. I would really love to have some academic documents about its structural integrity. I can imagine that these beams are build differently compare to the monolithic ones.

[@Nick32176]

They should use the cover block at the same time when laying the rebars. They already oiled the boards and also walking on the rebars. Any part of the rebar touch the oily board will not bond with concrete. This is the main reason in most cases when the buildings fall apart shortly after construction.

[@ivvasstanccic]

precast concrete beams , slabs @@halalmeatshophk

[@mazlanhashim9340]

Lagi 1..BRC blh guna tak for slab (2 stories)

[@apertureofconstruction1739]

Boleh. Untuk kerumahan boleh. Tapi Untuk kilang / Warehouse / ( big load ) tak boleh.

[@lonok111]

Great job! What is the calculated floor load? For which the upper reinforcing mesh, you can do only with a welded mesh over the beam?

[@apertureofconstruction1739]

We did 2 layer of Steel Rebar , tying 2 layer of T10. Slab Thickness : 200mm (8 inches) Not advised to do 1 layer since it was 200mm thick.

[@lonok111]

@@apertureofconstruction1739 What load is the floor 200 mm designed for? Are you building a runway?)

[@apertureofconstruction1739]

It’s a Fishery Jetty. 100 tonnes load per MeterSquare

[@lonok111]

​@@apertureofconstruction1739 100 tons per square meter ?? Fantasy!

[@apertureofconstruction1739]

Yes. You can find the video show the foundation of this structure in my channel. The construction process as well

[@ondrejroberto2896]

THANKS what kind of building is it? the columns are very densely spaced, looks to me some 3m grid

[@apertureofconstruction1739]

Ondrej Roberto, Yes , you are right. Its 3m Center to Center.

[@paulbaniqued9639]

let me know how many days beams hardening period before pouring slab concrete? thank you.

[@apertureofconstruction1739]

14-28 Days Recommended 28 Days

[@OzMat]

all over the world, concreters and builders are waiting for that next concrete agi truck to turn up, they take forever .

[@untungcsuntungcs7915]

From Malaysia

[@apertureofconstruction1739]

ok. terima kasih:)

[@temujinakim9606]

100 ton per sq.m ? thats a super impose load thats so heavy, what grafe of concrete did you used sir? and in my observation i. didnt see any achored. bar at the edge beam am i rigth sir?

[@apertureofconstruction1739]

Actually the anchor located at edge of each site. Concrete Grade 30 Imposed.

[@vioconstructionservices6218]

Ok na ok panalo ka boss

[@apertureofconstruction1739]

thank you ☺️ please enjoy

[@yuemeisoo2836]

讚喔～加油.感謝你的分享,期待你下一部作品喔！

[@mazlanhashim9340]

Boss . Apa nama itu besi kena bengkok every 4 ft gaps distance kalau saya tak salah..untuk slab mcm ini saiz 14ft x 30ft rumah, kena buat begitu juga kah??TQ

[@muhdfadzlie604]

Isi concrete kalau guna pump concrete, kos tinggi ke nk buat slab?

[@1p2pstart]

2021新年快樂~~感謝提供好影片！！

[@chardborja8486]

Could it be better if you construct it monolothic? specially upper floors.

[@SD-LM]

13:04 Бессмысленно большая толщина зоны растяжения в сечении перекрытия и слишком часто размещены хомуты.

[@apertureofconstruction1739]

признателен и спасибо за ваш комментарий. Детали стального стержня основаны на чертеже инженера.

[@SD-LM]

@@apertureofconstruction1739 Основаны - да, но применены бездарно. Инспектор строительного контроля

[@alpacino9180]

Kerja jdi lambat buat 2x. Pasang siap skali slab baru concrite lgi jimat masa n kayu

[@apertureofconstruction1739]

Structure tu terapung , Pasang 2 kali untuk Selamat & kukur

[@駱威の小帳]

very good construction

[@doublebest6092]

我知道了 谢谢🙏

[@meolodstv919]

Good job..pa shout out naman ako lod's..Meo lod's tv thanks...

[@mdsobujhossainbonohorit]

Good job.....

[@rakui]

thanks for sharing

[@doublebest6092]

请检查

[@apertureofconstruction1739]

Thanks for watching!

[@duckyellow9211]

谢谢你的分享，建筑这行业真的不简单

[@lowello9051]

Very good, nice

[@apertureofconstruction1739]

Ok. Noted. Welcome to my place

[@宅宅訂閱頻道]

很特別的頻道~漲知識了

[@doublebest6092]

谢谢你的分享

[@apertureofconstruction1739]

嘻嘻你的支持！

[@无处不在-j7h]

Hard work

[@doublebest6092]

Thank you for your comment !

[@apertureofconstruction1739]

谢谢你的支持！

[@judezang3450]

Nice construction

[@imzirawahkhahs1786]

Hi. some question I want to ask... 1. What type of column that u use for carrying the suspended floor? 2. What size u use for reinforcement bar and links in the column? 3. Can u explain the size, and type of foundation that u use ?

[@bryanjozenmanuel241]

What diameter of RSB did you use in your slab? Thank you in advance

[@ucphuoc9383]

Trụ đỡ nhìn bé quá. Ko cân đối.

[@agutinayalarodriguez5429]

En gue pai es esa carpintería es mil diferentes laRD

[@apertureofconstruction1739]

Nosotras somos de pais asia , Malaysia

[@fashionheehoo9652]

建筑这行业真的不简单

[@banzerna6699]

Berapa jarak antara tiang bossku?

[@apertureofconstruction1739]

Tiang apa ya ? Tiang besi structural ? 20 ft kaki satu

[@banzerna6699]

Mantappp...tq info nya bossku...

[@robertbanda-ff4ps]

Nice

[@apertureofconstruction1739]

Very nice

[@МойГосподин-м2д]

По чем льете бетон за куб...

[@apertureofconstruction1739]

лучше, если вы можете посмотреть все видео

[@falrus]

@@apertureofconstruction1739 he asked "How much do you bill per a cubic meter of concrete pouring labor?"

[@N.M_Construction_Design]

Very nice work

[@zengeddie5229]

很專業的視頻

[@早安你好-j6c]

謝謝分享

[@doublebest6092]

我知道了 谢谢🙏！

[@ilingtan7336]

期待你下一部作品喔

[@aliqadri4672]

Sir what does suspended slab actually mean ???

[@ondrejroberto2896]

as opposed to a slab laid on the ground

[@farhadkpk430]

Canstruction video channel Farhad kpk

[@apertureofconstruction1739]

cheers! Welcome

[@jiaxin5762]

👍👍

[@佈新]

布拉客小號**LIKE

[@高小淇-h7t]

辛苦了

[@想到再拍]

👍

[@doublebest6092]

谢谢你已经kqn j

[@parmandahuta]

Ferry good

[@conradduga4108]

I'm biting and grinding my teeth while watching the vibrator guy. He is doing it seriously wrong in every way.

[@apertureofconstruction1739]

how’s the correct method for the vibration process ?

[@halalmeatshophk]

the segregation should be avoided, but it seems the concrete mix has not be performed properly in the first place, because water is clearly seen pouring out of concrete immediately from the pour before the vibrator is placed.

[@jomero1141]

La vibrada está muy mal

[@EUguitarRULE]

The guy vibrating should be throw him down....serious vibrating!

[@apertureofconstruction1739]

Of course need to vibrate in proper way :)

[@EUguitarRULE]

@@apertureofconstruction1739 not that way you are separating the glue and concentrating it an area.....it’s already soupy.

[@jomaabuel1048]

When pouring concrete on a slab, more consolidation by vibrator should be concentrated only on beams and columns becuz slab is just thin and is always compacted by workers' weight. Vibrator should not be laid horizontally on the mixture and it should only take only about 5 secs about 60cm apart...it's a common-sense job for the operator when consolidation/compaction is the main goal.

[@jeffreyloftus3617]

What a mess / botched job the finished slab is .

[@東文-e6v]

感謝分享

[@既富貴又吝嗇的熊員外]

辛苦了

[@Neil090]

謝謝分享