303 Graphene Nano Spray Coating!

Today, we put 303 Graphene Nano Spray Coating through the Apex Detail Review Process!! 303® Graphene Nano Spray Coating is a Graphene Oxide-based coating, that will provide a high level of protection for 12 months. This product also reduces the surface temperature, which will reduce the amount of hard water spots you get on your car’s paint. It also features a high-water contact angle, producing substantial hydrophobic properties, that keep the water from sticking to your paint. After application, the paint will have enhanced gloss and clarity too.
The main differentiation of this product vs. others in the market is the combined durability and protection, along with how simple and easy it is to use! It bonds to the surface without prior paint correction or decontamination and is difficult to mess up application. Sprayed it on and let it sit too long, or missed a spot when buffing it off? No problem just come back and buff the remaining product off. No need for machine correction of high spots. It can also be applied in direct sunlight. Applying it in direct sunlight can even make the application process easier, as the heat helps the product cure faster. It can be used on multiple surfaces including paint, glass, wheels, trim, and more!
303 Graphene Nano Spray Coating....www.goldeagle....
303 GRAPHENE NANO SPRAY COATING WORKS ON THE FOLLOWING SURFACES IN THIS WAY:
Paint: Coats and protects the paint from scratches leaving a hard layer of protection
Glass: Protects glass from chips and cracks, repels water while driving
Wheels: Repels brake dust and helps keep your wheels looking clean (use an applicator to apply product to wheels).
Trim: Preserves and protects plastic.
Directions: Ensure paint is clean and dry before applying product. If desired, correct your car’s paint before applying, but this is not necessary for the product to fully bond to the paint. Spray onto a microfiber or foam applicator. Apply to the surface in a crisscross pattern to ensure complete coverage. After application, allow product to cure and haze white, then buff off with a clean dry microfiber towel. After buffing, no cure time is needed before being introduced to water.
Data sheet and resource page for products by Henry Freeman! docs.google.co...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#303graphenecoating #303carcare #graphenecoatings

[@mikeyp2447]

I respect how you acknowledged the gimmicky “graphene” buzzword used in the products....but if it performs well... who the hell cares. Great channel B!

[@dodge20071]

Just what I thought too

[@lifeofbrian9511]

There are many detailer channels available and I watch many. But I truly really enjoy this one. Keep em coming!

[@1stfrompuertorico568]

Today Chicago Auto Pros, Pan TheOrganizer and now Mr. Brian with 303 Graphene awesome! "The price is right" Wasn't that the name of a TV show? If this product performs as expected then that is not only right but excellent. I like 303 products since all I have used really performed. 👌🏆

[@apexdetail85]

Absolutely...and I understand the debate going on about Graphene. But in the end.....it performs excellent....so far.

[@michaelrich7466]

Apex Detail what is the debate about graphene?

[@1stfrompuertorico568]

@@michaelrich7466 As far as I have been able to read about Graphene properties is that is harder than kevlar but flexible, light, reduces temperature of surfaces, has more resistance to water spotting, resistance to chemicals and dissipates heat; but that's in it's purest form and having it like that is very expensive and is used specially. Whatever that always means, you know it may be used for military purposes first and foremost. So what has been done is using the molecular structure in an oxidized form and different companies have created coatings. As far as I know, Ethos and GlassParency have them but also Apex Detail has videos on other products as a Graphene wax too but forgotten the exact name, sorry about that. So different products have their twist in order to make them easy to apply because they also have more longevity. The thing about this is the Graphene lasts more than a sprayable wax or sprayable ceramic and other basic ceramic coatings and even they improve the shine. Since everything of these Graphene coating products is new, they will mature just like Ceramic coating products started and lots of different companies have their version with applications and resistance in terms of years. So, Ceramic coating has evolved into this new product that is Graphene.

[@noxxious5.098]

Humberto Roche Garcia thanks for the full explanation 👍🏼

[@gleamcardetails]

@@apexdetail85 How long it lasted in the end? Still recommended ?

[@avfan967]

This is the only channel that I trust the reviews on. Let me start with that. On another channel I did take away a good piece of information and in that the detailer made a point of saying: “if the product you’re using is working for your needs, searching for the Shangri-La next best thing is not only a waste of time, it’s irrelevant” This is the main reason I like Brian’s channel, I’m not out buying products every month, rather I can get a quick review and sometimes a comparison right here. Great job as usual!

[@rexdejesus6664]

Thanks Brian for what you are doing in detailing community, you used it first hand, applying it, measuring gloss, and giving it a torture test then sharing your results with everybody, thank you Sir for hard work.

[@ludak83]

Excellent review once again. Unlike some other reviews where people just read the label on the back of the bottle and call it a review, this guy actually tests the product.

[@joerossi4231]

No one has actually harness a legit graphene product yet, they are nothing more than ceramic spray or ceramic coatings. Every company jumping on the graphene train. From what I’ve seen companies have gone as far as dying the water black to mimicking it and also just simply buying graphene powder off the internet and dumping a random amount into and already existing ceramic coating and calling it graphene. No one has been able to prove a legit graphene product. But I always respect your inout and your videos sir.

[@GSP-76]

Wow, I ordered this product before the video even ended...this is the exact type of product I have been wanting for easy to use protection on my car.

[@mynsxt6]

I have a bottle on the way as well, it will make maintaining our cars much much easier and fun!!!!!!

[@skipgumphrey9579]

Still have some SNS, some Meguiars Hybrid Detailer, and evening a couple bottles of TLC 2.0 and I still went ahead and ordered a few bottles of 303 Graphene. Looks like fun !

[@skipgumphrey9579]

Even Gotta love the autofil program ;)

[@chrisdettanascar9264]

I polished my BLACK CAR then I used some Carnauba the next day ALL by HAND , now I just bought some 303 now iam going to try it out ! THX

[@user-un5my5bw4j]

303 Spray on Graphene coating is what i started using in my shop for our standard protection coating after correction/detailing services are done on vehicles with two step 3D #500/520, or #501/502. It's fairly low priced, extremely easy and fast to appy, easily available, and works pretty darn impressive. Making it cost effective.

[@jerryclleung]

Brian, I just want to say I truly enjoy watching your videos. I basically watch these detail videos, if I'm interested in a product. You Sir, get straight to it! No talking mumble jumbo for 5 minutes this and that. True product review, in the video, in its entirety. Thank you for not wasting time and your honesty!

[@darkman8022]

That is one of the cleanest car i ever seen

[@superchargedsteve3411]

Your beautiful jet black Corvette is lucky and thankful to have you as it's owner! And I'm proud it was made right here in my state of Kentucky! 🏁

[@apexdetail85]

Supercharged Steve thanks! Cheers!

[@lorenreyes2855]

Dang Brian! I believe the international space station was in the reflection of your test panel! Just kidding! Thanks for sharing your thoughts and knowledge of the 303 Graphene spray sealant!

[@Zvertnie]

I’ve been using 303 Automotive Protectant on vinyl trim and a vinyl convertible top; works well, I like it. Great to see 303 has another product that appears to be a solid performer. I’ll give it a try. Thanks, Brian!

[@SirPhilMcCrackinVonBeggington]

Try the protectant on interior plastics, that's where it really shines IMO.

[@carlosorengo1809]

Yes I like a lot, I think I am getting this one as soon as my hybrid ceramic wax from Meguair is gone. 👍👍👍 Thanks Brian for another video.

[@zachdeany9397]

I like using the Turtle Wax graphene and I know I'm a little crazy and I do it every weekend I put on a top coat because I have nothing else to do on Saturday and I couldn't be happier

[@peterjurenovskis5933]

Great information Brian! With more companies getting into the graphene market, it’s nice to see something that ‘works’ at a decent price point. Jason at Chicago Auto Pro finished a video comparing ceramic and graphene applications in a side by side test. In one test he left a test panel out in the sunlight to heat up. The ceramic side was cooler than the graphene. The ceramic side also showed fewer hard water spots after drying. I’m not a proponent of either system. I just want to let people know what’s going on. It would be nice to see a comparison between the graphene spray on’s compared to something that is cheap and works like TWHS Ceramic Spray or even TW SealnShine. Keep up the good work!

[@mcalette]

Hey Brian. Great video as always! I really enjoyed hearing about your experience thus far with this product. I can't wait for the update on the long term results. I also really appreciated your common sense comments on the chemistry of graphene products. As long as it works or doesn't work is all that I am interested in hearing about. I am very excited to try this 303 Graphene Nano Spray Coating!

[@precisionlaser2158]

I use it for the first time on my new vehicle and was impress how bug splash came off effortlessly on an 600 miles trip. Use Mcguire polymer before but this is light years ahead. I am just focusing on bug splash in my note.

[@johncover3103]

The results look great! Time will tell on the durability! Durability is the key for me! Great review!

[@pj9241]

When I need to know I turn to this channel other channels are great to watch but this guy lays it out the right way!

[@J1Z06]

I can't wait to try some!! I agree with You....prep the paint,then apply this.

[@mnmn1665]

Thanks. And you did a fantastic job on that black Corvette! Thanks for taking the time and effort, it's much appreciated.

[@klasseact6663]

I applied a coat of the Launch Edition 303 Graphene to my DD which now sits outside 24/7. I have a coat of TAC System Power Plus applied to my car from mid June of this year, a couple toppers afterwards and now this. I applied it yesterday 10-11-20 and it's the last application of anything till the spring, a true real world test if there ever was one👍👍

[@markmccullough6873]

Very well done my friend.Love watching your videos when you do testing on a product.Keep up the great work! Stay Safe Stay Healthy

[@danfraser107]

Hi Brian. Thanks for the excellent and informative video. I am currently waxing my RV with Turtle Wax Ceramic + Graphene wax paste. Once done, I intend to apply a top coat of 303 Graphene. I'm a novice when it comes to detailing but I'm trying a few products to determine what works best for me. Please keep making more videos as they help someone like me a lot. Kind regards.

[@Centaur008]

"Sunlight friendly" are magic words for me. When my TW seal n shine runs out I might give 303 a try.

[@J1Z06]

I tried some of this on My 2005 Acura TSX which is coated with CSL/EXO ceramic coating. it was out in the rain today. The water didn't stand a chance. It's a nice topper. I never would have thought to do this. No complaints.

[@mycocheto]

Imagine all this interest in a nice product regardless if graphene is in infancy and we cannot buy it... I love 303 products but the second you do zymol video we all be waving Byeeeee waiting on 303 to get it available rather then on this wait list. I am glad I am not CEO of that company-lol. Thank you for showcasing product that is not available. But you are very my appreciated by all of us-Love what your channel offers. Sincerely

[@TampaBayDino]

Absolute LOVE your explanation when it comes to Graphene. The "debate" and ongoing "dispute" between other channels (you know) is head shaking at best. I TOTALLY agree with what you are going to focus on. Thanks for an honest and through review Brian.

[@kbitbit]

Appreciate your honesty on reviews and especially the time you spend on torture testing.

[@WillA2oh6]

Turtle Wax Seal n Shine / Ice Spray Wax combo can’t be beat by Adams or 303! Can’t wait for Turtle Wax’s version of graphene!!

[@eppyz]

Can't be beat how? These products are so simply to use and apply they are all in the same league. Personal opinions are subjective at best in the detail world... Too many variables... So just use what you like.

[@ChicagoAutoPros]

Great job Brian. I was also impressed with the product.

[@henryfreeman6113]

Ayyyy hello Jason!!

[@ChicagoAutoPros]

just me I don’t care what it has in it, it works!

[@ChicagoAutoPros]

@just me Changed my tune on what?

[@ChicagoAutoPros]

@just me I really like the graphene coating and thought is just as good as CSL. How was I dancing around anything?

[@jesselent7894]

just me he gave an answer idiot. Go watch the video again.

[@bangmygears]

Best youtube detail channel hands down , always thorough and to the point no bs

[@apexdetail85]

Eloi Batista thanks!👍

[@wademiyataki9221]

OMG, never thought I’d see you apply anything on the panel that without proper prep! Especially since you don’t condone that. Great video! Thanks Brian!

[@rodneyyoung8215]

Wow Brian vette looks amazing... thank you for another awesome video on a awesome product I'm ordering some as I type 👌👌👌

[@georgiannegooday9108]

ALL DAY I WAITED..... yes!!

[@404notfound.....]

Wow!! There is not 1 thing I don't like about this product. As crowded as my shelves are, there shall be more Room made lol. Excellent video Brian.

[@craig.encinitas]

404 not found -Seriously! I was finally settling on a go-to product. Ethos Defy. Now this! I don’t know whether to laugh or cry.

[@georgiannegooday9108]

Seal and Shine Vs 303!!!

[@jaybee2981]

Key difference would be with Water Spotting. Seal and Shine isnt the best with water spots. Unless you dry / blow dry your car every time it gets wet

[@goldenbear31]

Love your videos as always. Would like to see Vs SnS and TWHS ceramic spray coating

[@MrRedex88]

Very well done Brian. 👏 For me the biggest factor is the sun, it can cause any type of protection to fail prematurely, even the best ceramic coatings takes a beating. My truck stays outside at my shop so I'm always applying some type of protection, even if it's just a Touchless Sealant, I used tried the 303 Touchless Sealant and was impressed.

[@ailurolover1544]

Recently, I've been watching your video. Thank you for always introducing the new product.

[@MNpicker]

Love all 303 products

[@briank.3539]

Brian, thank you for your honesty. I was looking for a topper for Jescar and collonite. I will await the results of your "real world testing". Just found your channel and I am enjoying each video.

[@billnicholas1381]

You are dedicated to your business and your job. Congratulations on another thorough product review. I have seen numerous reviews of this product but none as thorough as all your videos. Stay in good health.

[@apexdetail85]

Bill Nicholas thank you good sir.

[@MrRedex88]

I love 303, their Touchless Sealant is ready good too.

[@glossworksdetail1458]

Thanks for the great impartial review. Looking forward to testing it out myself soon

[@johncastillo6159]

I am sticking with seal and shine !

[@mikeyp2447]

BTW... your C7 looks INCREDIBLE!!!

[@HoosierDaddyDetailing]

Thanks for sharing your insights on this product. I'm getting ready to start testing Zymöl's graphene sealant soon. I'll most likely be comparing 303's version side by side. Hope you are well sir.

[@paulhughes3961]

I just ordered a bottle and can't wait to try it on my 2006 NC MX5 Grand Touring it's going to turn some heads.

[@einstein3509]

I know it say no wait time after applying but this is what I noticed. I put the 303 Nono Graphene coating on my 71 Chevelle and the paint was smooth but not slick “at all”. My car is in the garage 90% of the time. After applying, I took the car out for a drive for a few hours and it was 90* plus outside then back in the garage After about 5 days sitting in the garage I noticed the paint was slicker. Then I put the 303 Graphene detailer on and it made it slicker but I was still expecting better. Then after another 5 days sitting in the garage OMG!! It’s like glass now!! So far I absolutely love this stuff. How long will it last?……probably a long time on my Chevelle it’s not a daily driver.

[@MetalDetailer]

I specifically searched for this product on your channel. Great work as always. Can’t wait for an update on this. I’m still going to purchase it tho.

[@chrismurphy783]

That vette looks incredible! I am going to try this one.

[@damiansutube]

Thanks for doing this video. I appreciate your time, effort and money to help us compare products. I’ve watched and learned so much from all these videos and channels in such a short time. I would have never thought turtle wax is killing it the way they are and such a great value proposition. A week ago I would have purchased F11 top coat! Haha I feel like the 303 graphene, Adams graphene and TW ICE and Hybrid solutions are the best value for performance out currently. I’m going to perform my first clay, compound, polish, coat, and sealant as soon as possible!

[@GRJCLyon]

I'll be honest, I like it and will probably buy it because yes I do want to try it. For 20 bucks why not? However, I'm not seeing the overall excitement in the videos from multiple channels today like I normally see. When TLC, BeadMaker (especially Beadmaker), Seal N Shine and a few select others the detailers were completely blown away from the new product. And that was across the board. I'm not seeing that with this product and that's concerning. Thank you for the honest video.

[@jamesbiedlar590]

I agree....do the damn prep!!!

[@justin94block]

Gonna use up my Beadmaker and SNS before buying this product. Hopefully gonna have an updated version of this graphene by then.

[@cardiackid48]

Excellent Video...thanks for your thourogh test!!! I especially thank you for not playing that damn music in your videos!!!!! It is so nice to just hear the video as it was done!!!

[@ronayotte3571]

Late to the party? It's not a party until Brian arrives!

[@apexdetail85]

Ron Ayotte 😂👍

[@harrym.3703]

A Tip from a German User - "ADBL Synthetic Spray Wax" from Poland , excellent !!!!!!

[@stevenm.2597]

Brian, Please do a comparison video between 303 Graphene spray. The Last Coat 2 and the Last Coat Black Ice. Thank you.

[@xzibito187]

do a side by side with turtle wax seal and shine or their ceramic spray wax version

[@bobdylan9117]

no

[@avfan967]

Agree. All these products are in the same price range, they’re all going to bead water so that doesn’t impress me anymore, most if not all now last 10 washes, so that doesn’t impress me anymore, we hardly ever see a fail from Brian‘s super road chemical mix, so that doesn’t impress me anymore. What does impress me is when Brian does a slickness test and we get a side-by-side race of a sliding sponge down the panel. Believe it or not that’s what my customers really judge a product on!! After every detail they take their finger and rub it down the side of their car and if it’s super slippery, you can see the smile start forming on their face. I kid you not. Success for the customer is all about how slick their vehicle is. As detailers we may know there’s more to that, however from a customers perspective, it is often that simple!

[@ohboy2592]

AVFAN customers who go by how slick the paint feels are clueless, hence why they get their car detailed instead of doing it themselves. Old school paste wax in the 90’s applied twice will feel slick and bead water for months.

[@mykiman5955]

Used the product and my thoughts are as follows:- Easy to use and buff off Good gloss Good hydrophobic results (at first) Only really last about 2 months before it almost looked totally gone.

[@juanvideofotos]

Seems to work since as of today (Oct 4 2020) sold out everywhere, even in the big online retailer.

[@4315jdickey]

303 Graphene Spray Coating. just put it on 2 of my cars so far. Great product! One thing please use gloves!!!!

[@OctaneInTheVeins]

Thanks Brian!

[@JoeZasada]

I hope this one makes it into the Canadian market before too long. I look forward to try it. Still liking the Griot's 3-in-1 ceramic.

[@brandonmurphy832]

Great review. I was also impressed with the results!

[@neilwalker5041]

Great video and the 303 Graphene looks like a great topper!

[@mattduffy2023]

That Corvette is awesome . Jealous.... I want to put that on top my black silverado with TLC2 on it for the Pennsylvania winters

[@apexdetail85]

Matt Duffy I am in Pa. Go for it!😁👍

[@dlasti]

I don't think you're late to the party" as Pan the Organizer and Car Supplies Warehouse uploaded their videos today. Good review.

[@narutobroken]

Would love to see a head to head with turtle wax SNS

[@foxyepoxy602]

Is the consensus now that the improved SNS out performs Hybrid Solutions Spray Coating? I thought it was the other way around. Or does HSSC our perform SNS, but SNS looks better?

[@narutobroken]

benb023 they both do well. SNS seems to last slightly longer but the application isn’t as nice.

[@dillonlboyer]

@@foxyepoxy602 I believe Hybrid Ceramic is more durable and lasts longer than SnS 2.0, when applied correctly. SnS 2.0 is a combo of carnauba wax and si02, but I believe it only lasts 4-6 months compared to 12 months

[@dillonlboyer]

I think as long as you do 2 ceramic spray coats with a 24 hr cure time (possibly on top of a cured hybrid polish) it should last a while. The cure time is the hardest part of the tw hybrid line I've found. Unless you leave in your garage for 3 days straight, you have to wash and dry before each application. Hopefully they can get this line down to where it can all be applied in one day.

[@foxyepoxy602]

What I did was apply the Hybrd Solutions coating after washing, did not clay bar. Waited about 3 hours in the direct sun, applied a second coat. Waited a week and washed my truck, then used the Ceramic Spray Wax in the yellow bottle as a drying agent. Didn't wash my truck for about 2 months and after the first wash it looked great again, the grime didnt stick and water beaded better than it even has. Next wash I'm going to use Spray wax as a drying agent again and top with a spray carnuba wax.

[@chadj8349]

I haven’t hopped on the graphene train, I’m currently on the NV nova series train. I will probably get some for my son who started a detailing business at 16 because it’s sun friendly just like what he currently uses which is turtle wax ceramic spray coating.

[@Eugene2ndW]

Do have a way to expose long term to UV?

[@Diminish12]

Great I just purchased the Bio Nano Pro a week ago. Now I wanna test this. Do a comparison of 303 VS Art De Shine Bio Nano.

[@sallywallnuts8471]

I can’t wait to see this product in a side to side comparison against tw ss improved formula.

[@olgai.menendez9493]

Great info... I will get one also! The test you made for it was good enough for me also! 👍

[@sylvainmarier4818]

Another good product to save time and have great results ! How many of the product you used to make the entire car ? 1/8 1/4 1/3 of the bottle ?? Thanks again mister

[@7071t6]

Great job, keep it up, very impressed with new products as always and thankful of people like Brian doing these tests and reviews so people out there can make up their own minds which products they are going to use on their cars. :)👍🙌👌✔🚗🚗🚗🚗🚗✨✨✨✨✨

[@janoskaponyi2511]

Hey Brian, can you provide an update regarding durability? How is it holding up to the claimed 12 months plus?

[@greghinchy4341]

great video Brian mate your car is killer love

[@noxxious5.098]

Your videos are always top notch

[@TotalDetailing]

Thanks for putting some common sense out there. There is so much absolutely unnecessary toxicity surrounding this out there right now, it's actually cancerous.

[@thedoo777]

wow wow and more wow I just completed by turtle wax new in the approved formula sealand shineit was unbelievable now I'm going to try the 303 admittedly putting on was kind of tough as opposed to the 303 but so far so good!

[@mikea5205]

Looks like your glasses were polished and ceramic coated.

[@apexdetail85]

Mike A how did you know?😁👍

[@Nighthawkrun]

I really like your product testing, you aren't to sell anything, just test it.

[@NJEyeGuy2]

I'm curious to see its static properties. I can't stand the way spring pollen sticks to my car with other products. Hopefully this will be better. Time will tell...

[@RayNLA]

Try Bead Maker

[@TheNotoriousGamer]

@@RayNLA I love Bead Maker but it attracts dust. Not a great product if you want to repel dust.

[@RayNLA]

@@TheNotoriousGamer Interesting, I can see what you’re saying. Thanks for your reply!

[@tankeriv]

You know what I would love to see you doing? A review of single stage polishing compounds :-D

[@apexdetail85]

tankeriv I can revisit the subject👍

[@tankeriv]

@@apexdetail85 Well there are so many new products out there. It is dazzling. The last year alone. It was Corona mania. But in one step polishing compound world it's like a baby boom! 🤣

[@markharootunian775]

Thanks, Brian!!

[@1keykneedeep]

Just watched another channel evaluate the same product and had exact OPPOSITE RESULTS.

[@aquaman0167]

Interesting. Care to share?

[@MikeMo900]

Awesome review, love the channel!

[@petef717]

OMG that car looks amazing 😍

[@jimboh5131]

AWESOME, Brian! I think it would be VERY interesting to see if it does actually lower panel temps....

[@apexdetail85]

JimboH5 I think we know the answer to that.🙂

[@summerforever6736]

Car looks like a million dollar Griots 3in 1 also very good bit it is ceramic

[@akelaton]

great video as always , a lot of hipe around graphene great to see your opinion about it

[@Admin-ie9hp]

I love how they use brand new cars to demonstrate.

[@AK-ui1zl]

I personally find graphene to work better as a topper than a base coat. On my personal vehicles I have Feynlab Self Heal Plus topped with SPS Graphene (2013 Subaru WRX) and Icon Rocklear topped with Feynlab Self Heal Lite topped with SPS Graphene (2003 Hummer H2) and boy does the graphene make a difference on water spotting and dirt or bugs sticking to the car. But scratch resistance is not very good. Thus it’s better to use a base high solids coating then cure then top with a Graphene product in my opinion.

[@jayz313]

Well done presentation. Brian, I would like to know how this compares to my favorite topper to use going into winter, GTechniq C2V3.

[@a.r.walker6255]

I just ordered some. Excited to give it a try.

[@2punani2]

Mr. Walker. I can’t find it. Where did you order it?