APMD in Air Brake System,Working of APMD(Automatic Brake cylinder Pressure Modification Device)

[@santanubiswas4351]

you are great, apko kai vi vidio humko achha lagta hay. apko samjhaneka technic bahut achchha hay

[@Akyadav45678]

Very good sir 🙏

[@mithunbala8627]

Nice or jankari chiye

[@Dinesh-el4ek]

Bahut acha laga 💚

[@3_9c_prachikumari42]

LHB कोच में ब्रेक एक्सीलेटर के बारे में बताइये

[@krnkutty91]

Railkarmchariyo k leye bahut he upyogi jankari is u tube l madyam sey mil jata hai

[@ramannak8846]

wagon me snubber springs remove method when during ROH thoda explain video bejiye Thank you sir

[@ramannak8846]

and repalace of snubber springs thank you sir

[@radheshyammeena6206]

Blc container मे brake binding रिलीज करना बताओं सर

[@prakashmeghwal9631]

NYC sir but pressure ka difference 3.2 se 3.8 kese hua?

[@vennanagarjunreddy6509]

Super

[@dhanrajmankar6234]

3.8 kg/cm2 का प्रेशर BC में किस तरह जाता है जबकि DV से 3.2kg/cm2 का प्रेशर आता है

[@venkatachalapathi6422]

Once u told when loaded it will send 3.2 kg/cm and 3.8 kg/cm pl clarify

[@Failure2Success]

Sir,It's my mistake ,APM sends 2.2 kg/cm2 pressure to Brake cylinder when wagon is empty. When wagon is loaded APM sends 3.8 kg/cm2 pressure to Brake cylinder.

[@ajay_rocking]

Dv se pressure APM me 3.8 ata he jab ki apne bataya 3.2 kg ata he

[@Failure2Success]

It's my mistake.It is 3.8 in place of 3.2.

[@Failure2Success]

kzbin.info/www/bejne/qWPOpKx3bdGbZ6c watch this video also.

[@lokeshbaghel137]

Touch krne par loaded bata rhe hain. To ka loaded par movement 104mm nhi hoga kya? Answer please

[@Failure2Success]

Loaded me movement 80 mm se kam hi hota.jabki empty me movement 80mm se above hota hai. Sensor arm wagon ki har condition me side frame ko touch karti hai.

[@lokeshbaghel137]

@@Failure2Success thanks

[@adityagamerOP1]

APM loaded =104 mm Empty =80mm hota hai sir...plz confirm kijiye

[@Failure2Success]

No sir, total movement of sensor arm =104mm During maintenance height of sensor arm is set as 96(+1-0) During brake application sensor arm move downward and travel some distance and touches the side frame. If sensor arm movement is under 80 mm it mean wagon is loaded.and if sensor arm movement is more than 80mm then it means wagon is empty .

[@Failure2Success]

kzbin.info/www/bejne/qWPOpKx3bdGbZ6c watch this video for more detail.

[@sachinbhartidhanukdhanuk898]

आप के बनाएं गये वीडियो बहुत अच्छा है

[@ganpatsisodia3293]

APM DIVICE KON SE WAGON ME LAGAYI GYI H

[@sukantabaliarsingh9769]

When DV is sending 3.2 kg /cm2 pressure to APMD, how APMD will send 3.8 kg/cm2 to BC ? Please clarify.

[@ALOKKUMAR-to4fq]

Very useful information, sir. Thanku.

[@gattimivara1053]

Use full msg

[@heeralalmeenaheeralalmeena5770]

2.1impity m+-.1 3.8 loded m+-.1 Hota h

[@amitkataria7353]

How many APMD in one wagon

[@Failure2Success]

One APM in one wagon

[@dhurendrayadav1167]

Book banay ho kya sir🙏

[@Shanker25011976]

isme dekhiye jo indicator hai wo bc me pressure jaane se niklega...apne bataya ulta.

[@ayodhyapal7864]

while running over a curve, if APMD fitted on the wagon that is on outer side ( super elevation side) of track , the device may be misguided or not...?

[@ramcharanbirua5647]

Good knowledge,but doubt hai 0-80mm=loaded 80mm above=empty

[@swapnil1827]

Agar wagon loaded rahegi to load ki vajah se wagon body side frame ke jyada najdik rahegi... Isliye apm kam move karega

[@yogeshwarlonia7912]

Lsd kaise kary krta h

[@nashirshaikh5780]

Dv se pressure 3.8 jata hai.aap 3.2 bola rahe ho

[@maheshchand1104]

3.8kg pressure jayega aapne. 3.2kg bhej rhe h

[@Failure2Success]

You are right sir.

[@chittupandey357]

3.8 pressure hoga naki 3.2

[@exploreworld2690]

Sir dead clector ke bare main bataee

[@NarendraVerma-eh5df]

Sir single stage DV always creates 3.8Kg/cm2 pressure in place of 3.2kg/cm2. Pl rectified it.

[@Failure2Success]

You are right sir.Single stage DV always create 3.8Kg/cm2.I t my mistake.3.8 Kg/cm2 is correct.

[@kapilsaini1032]

Yhi Mera doubt tha

[@ayodhyapal7864]

what is the working- mechanism of movable arm or sensor arm ? How does it sense that the wagon is loaded or empty ?

[@Failure2Success]

Thank you ayodhya pal ji. kzbin.info/www/bejne/qWPOpKx3bdGbZ6c Watch this video for Working.

[@scsainilp]

80mm. तम embry r १०४ mm loaded

[@bivishanmunda8099]

Piston stroke kaise measure karte hai MBMS main ye jarur batyea next vedio main

[@mukteshwarmodi6986]

Axillary ka pressure kaise realea hota hai

[@ssecarriagewagon4836]

aap 3.2 pressure de rhe hai to B.C me 3.8 ka pressure kha se jayega

[@Failure2Success]

Sir it my mistake I speak 3.2 but written 2.2 so 2.2 kg/cm2 is correct.APM (EL 60 valve)is pressure transformer which send 60%of 3.8=2.18kg/cm2 approximately 2.2 kg/cm2 in BC when wagon is empty and remaining in its reservoir tank (capacity-6.6lt).So APM also called EL 60 valve.

[@geetaranimahato1706]

Dv se hamara 3.2 ka pressure aa rha h apmd me or fir jb loaded condition me bc me 3.8 ka pressure kaise ban rha h jb hamara supply pressure hi 3.2 h .Please clear it.....??

[@pinakinathmukherji1240]

Please make a video on BOBRN D.O.M & all the dimensions of BOBR & BOBRN LINKS ,TURN BUCKLE, CLEVIS etc. In details

[@SSEGeneralRDM]

why not you bro

[@amitkr.srivastava4072]

APM arm touch side frame in both empty and loaded condition , pls correct the same

[@rahulshambharkar2181]

Sir Dv se Apmd me pressure 3.2 ya 3.8 kg jayega

[@u.c.sharma1547]

Please make a video on pressure trouble in Goods train mainly happen during night in winter and how to rectify it.

[@prataparaosatyaprasad6047]

How pressure raised in APMD from 3.2 to3.8 in load condition

[@swapnil1827]

AR

[@murugan3085]

Loaded condition 3.8kg/cm2 sir

[@rajeshkumarrajoria6954]

0 to 80 wali length kis point se measure ki gai he. Means kha se measure karna he

[@krish_068]

Wo kaon si problem old braking me thi jise suthar karne ke liye iss new bmbs system ko lagaya gaya hai

[@ayazpathan8609]

6.6 ltr kaa pressure exaust kaise hota h fir aur DV se 3.2 kaa pressure aaya h to bc me 3.8 kaa kaise jaa raha h loaded condition me

[@Failure2Success]

3.8 is correct t in place 3.2.It is mine mistake. First part of your valuable comment , when brake release pressure of 6.6 ltr also exhaust into atmosphere through DV as BC pressure exhaust into atmosphere through DV.

[@jitendrachopra2089]

Nice vedio, very useful for everyone

[@pukhrajkumarsahu7971]

Sir in empty condition movement of sensor arm is 104 mm?

[@haris7868]

Sir Dv se pressure 3.2 bole and jub load me bc ko 3.8 pressure jara to extra 0.6 pressure kahase jara reply soon

[@isubparmar8129]

Sahi hain aap

[@jitendrakumhar5795]

Good sirji

[@amriteshkumar7793]

trolly roh kaise hoti hai sir

[@vikashthakur5863]

Sir if wagon is rake is empty.and brakes are applied many times enroute then every time pressure to BC will be 2.2 but DV sends 3.8 and once the AR of 6.6 litre is full what will hapen to the extra pressure

[@Failure2Success]

Vikas ji thank you very much for your question. I will explain the things.When rake is empty 2.2kg/cm2 pressure goes to BC and extra pressure goes to 6.6L Reservoir in Brake Application .But when Brakes are released by exhausting BC pressure to Atmosphere through DV exhaust port same time 6.6L reservoir pressure also exhaust to Atmosphere through DV Exhaust port. So in brake release Both BC and 6.6L air reservoir pressure exhaust to Atmosphere.

[@BRIJESHKUMAR-nm1lg]

धन्यवाद सर

[@Failure2Success]

Brijesh ji, videos ko share jaroor kare jisse inka labh others ko mil sake

[@anilroy9198]

Depot store ka bhi video banaye sir

[@ramkishorkushwaha2964]

Please make a vedio on BMBS cylinder (same time BC operated but brake blocks not touch the wheel trade ) what is process to attend it rejection.

[@maheshchand1104]

bk wheels ke daya se lgte h

[@maheshchand1104]

9784222895 contact

[@isubparmar8129]

Empty & loaded ka pisten stock kya hain mbs cilinder main ?

[@raviranjanravi1061]

Kindly send a video on BMBS hand brake, mechanism with parts name

[@RanjitKumar-rc2bu]

डिस्टीब्यूटर से 3.2 का प्रेसर आता है या 3.8

[@Failure2Success]

जिस wagon में APMD लगा होता है उसमें DV se 3.8 kg/cm2 ka pressure aata h or jisme C3W2 DV Laga h (BLC wagon me) usse 3.8 kg/cm2(loaded) और 2.2 kg/cm2 (empty)ka pressure aata h

[@RanjitKumar-rc2bu]

@@Failure2Success धन्यवाद

[@shailendrapriyankakangde9523]

FIBA DEVICE KO RESET KARNE KA TARIKA BATANE WALA VIDEO BATAIE SIR.. JABKI WO ON CONDITION ME HO JAYE

[@vivekanandanvivekanandan6715]

Thank you

[@gauravmehra3157]

Difference between apmd & lsd

[@hemantkanwaria]

Sahi h

[@satishkumar-kk6zi]

0 to 80 loaded condition and above 80mm empty condition...yes...ok according to you....but i think sensor arm large moment is loaded condition.....yes or no ... sir.

[@Failure2Success]

Sir,Sensor arm ka movement 0 to 80 tak loaded h and 80 above empty condition.सर अगर आप इसे check karna chahte h to sensor arm k नीचे 25 mm moti koi plate rakh de जिससे arm ka movement 0 -80 के बीच होगा यानि loaded condition. जिसे आप APMD me लगे indicator से पहचान सकते है। अगर indicator orange colour me bahar h to empty , or agar indicator tube me hi rahta h to loaded condition hogi.

[@ManojKumar-be9tn]

Sir workshop me coach ki poh parkirya Hindi me

[@vikashthakur5863]

Sir when wagon is loadex gap between the trolley frame and sensor arm decreases so 80 mm for loaded and above for empty

[@33mandeepsingh67]

Sir explain the movement 0-80 for loaded and above 80 for empty ....I am in confusion

[@aniltripathi7819]

Sir APMD युक्त वैगन के DV का CR 5 ltr का क्यों रहता है

[@ssedhobighate.rly.jamapur6515]

3.2 kg/cm2 ka presser bc me 3.8 kaise hota jata hai sir.

[@vikashthakur5863]

Sir isolating. Cock kabhi bhi 3 way nahi hota

[@Failure2Success]

Vikas ji thank you very much.You are right.Isolating Cock is of two type .1- Isolating Cock without vent. 2-isolating Cock with vent. So In BMBS this Isolating Cock is with vent so that BC pressure exhaust to Atmosphere through this IC.

[@RAHULSINGH-sy5qm]

सर APMD के बारे में जानकारी देने के लिए धन्यवाद । Sir इसे EL 60 क्यों कहते हैं। क्या यह empty Loaded डिवास है।

[@vikashthakur5863]

EL- empty loaded 60 stands for 60% Max pressure -3.8 Min pressure - 2.2 (60% of max)

[@praveensingh-di5cw]

Aapne 3.2 bola par bc me 3.8 kaise hoga ye to nahi bataya Ise samjhaye

[@yashpalsoni4208]

Sir in wagon DV assembly in which CR is how much litres it is ?( In icf n lhb is 6ltr )

[@subratakrhazra6238]

Thank you Sir..🙏🙏

[@anjalipalke6352]

बहुत बहुत धन्यवाद सर

[@padmalochansahoo768]

How to BMBC automatically adjusting system at the time of brake application please explain .

[@naveenmeena7068]

LHB & NORMAL COACHING RAKE KI BHI DEEPLI INFORMATION DO

[@nabajyotimalakar9131]

brake block ki ak video bana dijie na

[@maheshchand1104]

Kiya chahiye bk me

[@maheshchand1104]

9784222895 contact information

[@carriageandwagonsknowledge5714]

nice information

[@utpaldutta4089]

CR capacity 6 liter

[@rajughule9881]

Sir aap ne Bahut asche video banaye. Sir aap MEMU Train Three face videos Bhi banaker humara margdarshan kare. Thanks sir.

[@shaibalranjanbarik9876]

Sir pls make a video loaded and empty device, as it is covered with dust, hence loaded and empty can not be recognized

[@Pankaaj135]

Good job sir please keep it up.

[@akshayakumarsahoo1977]

Piston stroke Kya

[@satayanarayanasingh3945]

Very informative video

[@NARENDRASINGH-dr9vy]

आपने विडीयो में बताया की APMD में डी वी से 3.2 केजी/वर्ग सेमी का प्रेशर आता है तो लोडेड कंडीशन में सिलीन्डर मे प्रेशर 3.8 केसे हो जाता हेै क्या APMD मे प्रेशर बडाने की मशीन लगी है

[@abhijitrajsinharishu1103]

Wo mistake hua hai. Empty me 2.2 Loaded me 3.2 kg/cm square hoga

[@Shanker25011976]

nahi 3.8 kg hi hoga aapne apm ke reservoir ko dekha ye extra .6 kg wahi provide karta hai

[@RohitSingh-pq8ss]

😂😂

[@maheshchand1104]

96 ka moment kiyo hita

[@brillianttuition1176]

Why it is called el 60

[@Failure2Success]

Due to pressure limiter. 2.2kg/cm^2 is 60% of 3.8kg/cm^2 3.8*(60/100)=2.2

[@PreetJuice]

Good job sir, please keep it up

[@manojkumarmohanta6207]

Thanks sir great information

[@Failure2Success]

Thank sir for supporting us.Please share these videos to others so that they can enhance their knowledge.

[@mithunbala8627]

👏👏👍

[@scg7196]

Very good

[@sunilkumar-mt4fo]

3.2 se bc me 3.8 kg kaise jayega,

[@maheshchand1104]

104_79=25

[@satyajeetkumar4301]

Thanks

[@nandlaltury1756]

Thank you sir....is information ke liye

[@shivrajsingh4836]

Thank you sir

[@JM-zl8bi]

Very helpful for c&w employees.

[@santanunag4915]

Please One lecture of BP & FP PIPE FUNCTION S Sir👏🏻

[@NarendraVerma-eh5df]

Thanks