my quad 2014 yamaha My Truck 2014 Silverado WT Pit-bike 2019 Apollo db-x18 125cc
Пікірлер: 154
@Jordakynett2 жыл бұрын
The editing is so simple but makes the video watchable and kind of quirky funny I love it! I’ll be back to watch again when I install. U the man!!
@SixStarRider2 жыл бұрын
Thanks 😎
@evanseymour41724 жыл бұрын
Clear to info! Can’t wait to see the bike kick ass!
@SixStarRider4 жыл бұрын
Thanks and yeah I cant wait to see it run too! Ill make a video on it for sures.
@D-Day-fb3pw4 жыл бұрын
You should get the 48mm NIBBI air filter that goes with that carb. I also use the NIBBI throttle and cable for it. It's like butter... My bike rips now 😁👍
@SixStarRider4 жыл бұрын
Nice 👌 makes a big difference
@KGRowlo3 жыл бұрын
Great video! I just ordered a Apollo 125 dbx19! Think I’m going to go with the mikuni
@SixStarRider3 жыл бұрын
Thanks and nice you will like the bike a whole lot better with the carburetor
@got2getit204Ай бұрын
I think NIBBI is better and I’ve never had a makuni that’s how good the NIBBI is!
@DirtRasta8763 жыл бұрын
Apollo gang 🔥🔥
@KGRowlo3 жыл бұрын
Yesss🤙🙏
@user-cb2rq8iy9x10 ай бұрын
Not gonna lie carbiator sounds better than carburetor 😂🙌🏽
@SixStarRider7 ай бұрын
Yeah ha 😂😂
@andreidan924 жыл бұрын
get a foam filter with that carb , It'll run much much better. don't forget to oil it
@SixStarRider4 жыл бұрын
Yeah i did all that and I perfer a uni because it keeps a lot of dust away from the engine and it wont damage it.
@UCantKICKit3 жыл бұрын
There’s a line that runs from the top of the filter, how would I connect to the foam filter ?,there no place to put it on the top of the foam uni filter
@oldgold8236 Жыл бұрын
Great video !🤙🏻
@Blitzer8504 жыл бұрын
Nice video & good info 👍
@SixStarRider4 жыл бұрын
Thank you I tried to explain it well so you guys can have a good Idea of how it works, glad you liked it 👍
@MagisMoto3 жыл бұрын
Thanks for sharing very helpful
@SixStarRider3 жыл бұрын
No problem and glad it helped
@chadh32694 жыл бұрын
Could u provide a link please where you got those flange adapters for the carbs I can’t seem to find the right one I need. I need one exactly like you have.
Next time can you start the bike to see if it runs good thanks
@SixStarRider4 жыл бұрын
Yes I didn’t have the air filter so thats why I didn’t start it but next video will have the pit-bike running 👍
@aaronbaar28663 жыл бұрын
Yo how lit were you making this ? You definitely handled that work though.
@SixStarRider3 жыл бұрын
Thats naturally all me 😂 thanks though
@One7Beats4 жыл бұрын
can you leave a link to the adapter you got? i didnt realize they sold the carb without the adapter, pretty stupid that you have to order them separately
I need to know proper chain size for my Apollo rfz DB 18? Is it the 428 110 link. I wanted to upgrade my chain having trouble finding what size it is
@SixStarRider3 жыл бұрын
Get a 428 120 link just in case its always better longer and you can cut it im not sure how many link it is
@patarmstrong3582 Жыл бұрын
428 is the size of the links and spacing between. Buy a new 428 chain wih at least 110 links. Buy a chain breaker tool with it. You will need to shorten the chain to fit. You'll need the special tool, or beat it to death with a hammer and punch, and squeeze back together with vice grips. Just Buy thr tool.
@sydhoncho85774 жыл бұрын
How Long Did It Take To Get To You And Did You Buy It On PreSale ?
@SixStarRider4 жыл бұрын
Like a week and not on pre sale
@chinosaki80673 жыл бұрын
I got this carb for my Apollo but it’s bogging when WOT. What jetting do u think I should run for main and pilot?
@SixStarRider3 жыл бұрын
If its bogging im guessing there is to much fuel going into it so it has a rich mixture so i recommend moving down 2 sizes from what it has in it now to have it smoothen out. I cant say exactly 2 but you may need to go down more depending on your elevation but try doing 2 sizes smaller and see what it does from there
@chinosaki80673 жыл бұрын
@@SixStarRider thanks I appreciate it 👍🏼
@G322G3 жыл бұрын
@@SixStarRider I was having the same issue and went with your advice of dropping two jet sizes which was dropping to the Jet 88 size from the preinstalled jet 90. Im running the fuel screw out about 2 1/8 to 2 1/4 and it seems to run very well. Thanks👍
@quarans082 жыл бұрын
@@G322G how do you know the sizes?
@G322G2 жыл бұрын
@@quarans08 Mine had the sizes printed on them. When I received the carb from amazon it was running k38 pilot and a k90 main. I believe the K mean its keihin style jets.
@kevinlepage1234 жыл бұрын
New subscriber I need help i bought a mikuni 606 real just like yours I need to know I have 125 thumpstar. the mikuni vm 22.26mm 606 stock 22pilot. 190main jet did you change your jets
@SixStarRider4 жыл бұрын
No i still have the stock jets that came with it
@patarmstrong3582 Жыл бұрын
22 pilot will work, but will be rich. You'll need closer to a 110 main. That carb has 2 stroke jetting. It'll work if it's rejetted.
@Polaris91rxl4 жыл бұрын
I have a 2019 premium madix 125, and this carb I bought with is, same nibbi.. Will it work? I got the intake hose with it and it seems to be really big, and the intake itself is really big. Will this carb with for the madix?
@SixStarRider4 жыл бұрын
Should be the same just try and see if it fits.
@Polaris91rxl4 жыл бұрын
This is the intake tube that came with mine. Is this the wrong one? www.amazon.com/NIBBI-Replacement-Performance-Manifold-Scooter/dp/B07KR24LDF/ref=sr_1_2?crid=JT1K8J9T9IHG&dchild=1&keywords=26mm+intake+manifold+adapter&qid=1591392105&sprefix=26mm+intake%2Caps%2C161&sr=8-2
I have a question I can't figure out why I can redline any of my gears the bike get half way and cuts out till I change gears still when I get to 4th it won't max out I worked on carb adjusted and I have the mikuni crab need help to figure this out
@richardriffle97734 жыл бұрын
@Randy Mcilveene today I got out and its ripping I think its spark I need more spark they guys that had this before me put a 210 kit on it with 125 spark plug and CDI I put a racing CDI of my moped and it started ripping
@SixStarRider4 жыл бұрын
Maybe thats why everytime a bike has something done to it like engine work you need to upgrade something else so it can compensate for the new power so it can work together and run right.
@richardriffle97734 жыл бұрын
@Randy Mcilveene I actually needed a smaller one I put a 90 in it and its why why better
@mikahdogg50554 жыл бұрын
Will the adapter fit for my 48mm air filter i bought?
@SixStarRider4 жыл бұрын
The adapter is not for the air filter its to connect the carburetor to the manifold that goes to the engine
@dankersting4 жыл бұрын
My adapter is too big, cant find the right one anywhere
Do you have to buy the adapter To connect the carb ?like is it necessary
@SixStarRider3 жыл бұрын
Yes you do need the adapter
@patarmstrong3582 Жыл бұрын
What about buying a flanged carb from the start?
@mainelyadventures9033 жыл бұрын
What’s the word buddy? Any luck with the jets? I just ordered one on Amazon. I’ll cancel if it turns out to be not worth it.
@SixStarRider3 жыл бұрын
I haven’t jetted it ive just messed around with the air screw and its ok not perfect but it rides fine in the trails and slow riding it just bogs a little when first taking off
@mainelyadventures9033 жыл бұрын
@@SixStarRider ended up canceling my order and picked up a vm22. Hopefully that works good
@SixStarRider3 жыл бұрын
Oh ok 👍 and I hope it works out well, i will start to Bring out more content and I will do my best to explain things so they can be understandable.
@troycarrigan48933 жыл бұрын
I have a 2021 SSR 125 with the NBBI 26mm with a 112 main jet and the air fuel mixture at 1 1/2 turns out and it turned this bike into a beast!!! It now tops out around 60mph!!!
@mikahdogg50554 жыл бұрын
What's the 35mm thing you bought for the carb because I bought the nibbi carb and didn't know I needed that. Do I need it?
Not at the moment but when tuned it can make it slightly faster.
@SixStarRider3 жыл бұрын
But also if tuned right it will perform way better more responsive and everything.
@June46003 жыл бұрын
I have the same nibbi carb can you help me out I wanted to know if the choke works automatically or manually
@SixStarRider3 жыл бұрын
Manually you have to pull it out when starting it when its cold and put it in when the bike is warm
@June46003 жыл бұрын
Cool thanks !!
@sadakatuljaria99134 жыл бұрын
I installed the mikuni carb on my rfz but it’s bogging, any tips ?
@SixStarRider4 жыл бұрын
Its to rich needs to be rejetted.
@sadakatuljaria99134 жыл бұрын
SixStar Rider thank u🙏🏾I’ve done that now it runs perfectly
@Countryswag694 жыл бұрын
I’m getting the same bike... and want to get the nibbi carb.. did you have to change the jets with the one it came with? I need info so I can do it right lol I’m not that good with jetting haha
@SixStarRider4 жыл бұрын
l lllNOESCAPElll l no we did not change jets they run good how they came.
@Countryswag694 жыл бұрын
Ok thank you bro
@ybjay1094 жыл бұрын
Where buy bike?
@SixStarRider4 жыл бұрын
www.powersportsmax.com/index.php/cPath/33/fid/84
@MrJoss-ud1bt4 жыл бұрын
What do you gain with this Carb?
@SixStarRider4 жыл бұрын
More power and more tune abiliity to the carb and better throttle response
@mystery54852 жыл бұрын
is the fuel line a 3/16
@SixStarRider2 жыл бұрын
Not too sure and sorry for late reply
@SixStarRider2 жыл бұрын
Maybe a 1/4”
@mystery54852 жыл бұрын
@@SixStarRider its alright
@rickliao94383 жыл бұрын
Hi, SixStar Rider! Very interesting reviews video! How can to contact you! Thank you!
@boys93054 жыл бұрын
were did you get the bike??
@SixStarRider4 жыл бұрын
Powersportsmax
@SixStarRider4 жыл бұрын
www.powersportsmax.com/index.php/cPath/33/fid/84
@Blockhead_teda3 жыл бұрын
I changed my carb it’s idling super high & bogging
@SixStarRider2 жыл бұрын
You can turn down the idle or adjust the throttle cable too and sorry for late reply
@Blockhead_teda2 жыл бұрын
@@SixStarRider found out what it was my choke was stuck open lol wire was in the way
@SixStarRider2 жыл бұрын
Oh ok thats good 👍 glad you found the problem
@donkeeks43423 жыл бұрын
So it's the vm22 of vm26 mikuni
@SixStarRider3 жыл бұрын
vm22 is the mikuni the nibbi is a diffrent brand so they have diffrent names PE26
@pactube613 жыл бұрын
Can you link the airfilter you used for Minkuni carb I have a VM26-606 and i need an air filter for it and i have a Apollo 125 2014 so its old
Hi, would this carburetor work on this bike? www.amazon.com/gp/product/B07G915FNB/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@SixStarRider3 жыл бұрын
Possibly but if you buy cheaper carburetor it wont be as good for performance, you get what you pay for.
@got2getit204Ай бұрын
He’ll naw I know I’m too late!
@fheel13 жыл бұрын
Pretty sure that's a fake mikuni carb
@SixStarRider3 жыл бұрын
Possibly but I compared it to a real one and it has everything the same.
@patarmstrong3582 Жыл бұрын
Pretty sure all but one of my bikes have knockoffs. I've had to replace a couple carbs that were never right from the factory, so they aren't perfect, but the motor has no idea whose carb is on it. It's got the big slide, and that's what you want...
@patarmstrong3582 Жыл бұрын
Pretty sure the bike doesn't care.
@fheel1 Жыл бұрын
@@patarmstrong3582 from my experience a lot of those copies don't run right the Machining is terrible the Jets that come with are different and not interchangeable I've had bad experience with them they may get something to run but they run like s***. An a terrible to tune
@straightdropbullykamp29733 жыл бұрын
Man u didnt show shit . Tryn see how you took it off
@SixStarRider3 жыл бұрын
Sorry ill try my best to make another video more in depth
@patarmstrong3582 Жыл бұрын
Get your hands dirty. It's held on with 2 bolts to the manifold, and a threaded cap on the carb top. Try.
@twenty-js1kd11 ай бұрын
thats a v24 bro
@SixStarRider6 ай бұрын
I don’t remember honestly bro but when i had bought it it said v22 im not too sure