Apollo z40 Nibbi Carburetor +Carbon muffler install *testride

[@teshuvahemmet3036]

IT sounds great 👍

[@jbuketss]

Thanks brother 🤟

[@niebs727]

Awesome work. What Jets did you use? And what size carb?

[@Mrhandsome25659]

This reminds me of gta just cruising around with commentary

[@imagine9375]

Dang, kids at the playground ain't what they used to be. These GMO's Get a headlight my guy..

[@blackjesus440]

What would be better the 24mm or the 26mm nibbi carb I have the same bike and tryin to figure which route to go. Did u have to make any adjustments to the jets or was it plug and play 🤔

[@jbuketss]

26mm is way better really opens up the bike got a new video cookin up 60+ mph, i did have to play around with the jets but once air/fuel ratio is good bike runs perfect👍

[@blackjesus440]

@@jbuketss appreciate the info bro I’m revamping mine as we speak ordered new custom decal stickers ,got street tires on it now and I’m going to put the flush light street legal kit on it.I deleted the air box completely and put the Uni Filter UP-4182AST 15 degree pod filter on it and about to change the sprocket debating on if I want more power or speed

[@blackjesus440]

And u right the first gear is trash on this bike 😂😂😂😂 hate it i come out of 2nd

[@kylestoner2059]

Do you remember what size jets you went with? What's your elevation where you're at?

[@Jxgg11]

@@jbuketsswhat jets did you have to use?

[@phil_goodluck3914]

Keep posting bro 🔥

[@jbuketss]

hy bro got a new vid on the way🔥 appreciate the support means alot💯

[@phil_goodluck3914]

Bro how come you didn’t put your graphic kit back over the exhaust it doesn’t fit back on or something? Or you just like it like that

[@jbuketss]

i took it off, I just think it looks a little better like that but yes it will fit back on‼️

[@Bagchaser352]

Keep posting

[@lilperk5]

Just got four bikes I’m about to start uploading

[@jbuketss]

hy which models did you get??

[@dabaroonitime6613]

Hey bro how did u end up tuning the new carb? I’m having trouble with mine

[@jbuketss]

yess you have to tune it and put correct jets took me around 15-25 minutes to get it running good with no bogging and good idle

[@mr.boost3d528]

What jets did you run? Just bought a z40 and a new nibbi and it bogs a little on bottom with a 98/100

[@fatburga]

Even a bike light

[@ivangtzz7113]

Fire vid ma boy 🔥🔥🔥

[@Tingu231]

did you mount the new exhaust to the old one?

[@jbuketss]

yes used the same hanger/bolt as well

[@jonathantamari7964]

Can u put the link to where u got the carburetor kit

[@jbuketss]

NIBBI Carburetor PE24mm, Fits... www.amazon.com/dp/B09Y924JP8?ref=ppx_pop_mob_ap_share

[@evoquesquad2015]

❤

[@rogerpage7029]

Is that the street legal apollo

[@jbuketss]

This one is non street legal but you can make it legal and register it 👍

[@Rippinandfishin]

Has the motor been reliable?

[@jbuketss]

Honestly much more reliable then expected turns on 1st kick everytime brother🤙

[@Rippinandfishin]

@@jbuketss what top speed u getting with the new carb?

[@jbuketss]

With nibbi carb and different sprockets im doing 68 mph new video coming soon🤙

[@mohammadallouh4714]

i have the same bike what sprockets are u runing@@jbuketss

[@phil_goodluck3914]

Where you get that exhaust from bro🔥🔥🔥

[@jbuketss]

Universal 1.5" Inlet Stainless Steel Exhaust Muffler Baffle with Removable DB Killer Slip on Dirt Pit Street Bike 125cc Motorcycle Scooter ATV,SIZE:Length 330mmX Dia.98mm a.co/d/e5tTCDe

[@georgelaw92]

Where did you get the rubber connector for it

[@jbuketss]

@@georgelaw92 should come in the kit brother👍

[@logantownsend1524]

What size jet you put in???

[@jbuketss]

don't remember exactly but it should come in a pack of 3 , and i installed the middle size jet a little bigger then the oem.👍

[@itsyoufriend2509]

What parts did u get and what size ?

[@camerondrayton601]

Is the read shock good or do I need to replace it

[@jbuketss]

rear shock seams very solid i adjusted mine to a good rate just have to find the right stiffness you are looking for, but i am still running stock shock might replace it in the near future.

[@evoquesquad2015]

put a 17 T sprocket for more top speed 🚀🚀🚀

[@fatburga]

U need a light bar on front

[@jbuketss]

bro i bought one already but i haven't installed it 😭

[@ITrunkzI]

Cullen park👌👌

[@jbuketss]

🤟

[@laythzeitawi1148]

Whats the name of the bar hand guards?

[@jbuketss]

22mm 28mm Motorcycle Handguard... www.amazon.com/dp/B07DS56SWX?ref=ppx_pop_mob_ap_share

[@bmx4life367]

What cc is that pit bike brutha???

[@Coblere]

125cc pitbike

[@jbuketss]

its a 140cc

[@WhyYouYapping]

You didn't put the slide in properly...

[@ProcompilationsDB]

where you get that exhaust at?

[@jbuketss]

Universal 1.5" Inlet Stainless... www.amazon.com/dp/B083HZXYX3?ref=ppx_pop_mob_ap_share