Apple Watch series 4 LCD Replacement

[@coreyb3438]

Thank you! This was the best tutorial I found to do this job! 🎯

[@nalindilhan7490]

Thank you so much for your video. What glue did you use? Please reply me.

[@micahrichardson9646]

what adhesive were you using for this repair?

[@jasperlongman7668]

I think the T8000 glue.

[@lequid18]

Very nice job, what product do you use to take off the module? thank you.

[@Macade_Olson]

If you buy an Apple Watch original display do you have to move over that chip from the screen?

[@KevinLugardo]

no

[@Hostezza._.]

Even I have the watch in same condition how much is the cost??

[@igadgetstechandstuffltd6954]

Hi Cambo Fixing, i damaged my Apple Watch S3 42mm GPS LCD flex connector port (LCD side), i think i forced the flex in while the back tab was in lock position and now it does not go past Apple Logo when i power On the watch. When i check inside the port, i can see some of the the terminals are out of position. Is it possible to replace the port with another one which i have from a damaged LCD ?

[@ashwin4398]

Hallo sir. Apple watch series4 44 mm display available .......?

[@benhamlin2208]

What sort of screen did u use for it

[@bryangonzalez3486]

Where can you buy the screens

[@AbdulSamad-su1zq]

Plzz

[@ulasdanacioglu]

Aliexpress 200 $

[@giuseppefarbo9534]

Hi, I’ve just changed the lcd on my Apple Watch 4. I don’t know if is my mistake but now I cannot hear sound from the watch( no audio during phone call and other sound). Have I broken something?

[@alimohammedhaider6611]

Hello, Can I connect two left cables to new screen and right cable to old NFC chip then unpair. Then connect all cables to new screen? I read this works on Apple Watch 2 can you please tell me the method for Apple Watch 4? Thanks!

[@NinjaNarutoJapan]

Hi...where buy?

[@pansitaz24]

I just bought it from someone for $40 and just like that an i just saved me $400.

[@patrickramsey7854]

How much for iwatch series 4 / 44 mm

[@hengappleweb]

How much for Series 3 LCD 38mm?

[@OmarmoX-l]

60

[@deveshgoel8844]

@@OmarmoX-l what 60

[@OmarmoX-l]

@@deveshgoel8844 no 160

[@ferozmohammed3939]

How much time take to dry glue For Remove rubber bands

[@MrSreejithvp]

Where we can get the lcd screens for series 4? Can you help on this?

[@kescha1995]

Aliexpress

[@Алексей-х2ю9э]

Why you didn't replace glass only?

[@cambofixing]

lcd broke

[@beatrizsouza9903]

does anyone know the name of this film to stick on the touch ??

[@jasperlongman7668]

Good work, but the NFC antenna [Apple Pay] will not work

[@abhirajput8838]

Bhai g merko display nhi Mel rhe h or charger

[@eduardosantosmenezes1141]

Como eu posso enviar o meu Apple Watch do Brasil para fazer o reparo com vc? Qual o valor do reparo do meu ?

[@Droczastar10378]

could I just take the screen off another series 4 and put it on my current series 4?

[@540tv6]

GloryBoyTaee yes if it’s the same size

[@KevinLugardo]

you dont even have to change the antenna chip the way he did.

[@MarshallSmith27]

No. you need to make sure they both have the same A model number

[@caseyritter3185]

Kevin Lugardo in order for Apple Pay you do right?

[@Edy-in8qd]

I replace the screen but onyl have vibration, no image on the screen :S why it could be?

[@KevinLugardo]

hold both buttons down until apple logo shows up

[@MirosOriginalMix]

Same problem, are you Fix the problem?

[@MirosOriginalMix]

Lo solucionaste ?

[@Edy-in8qd]

Yekke que va , he pedido otra pantalla y tampoco, lo doy por perdido ya que soldar el cable flex es complicado

[@hsuit23]

3:46 What is the name of part?

[@derekmiller823]

late reply but i am almost certain that is the NFC chip that allows for apple pay

[@tobby1able]

I scream in pain!!! HE IS WRECKING THE WATCH!!!!!

[@naseerkam7712]

Hello. Is it necessary to replace the ic pair from the broken watch screen to the new screen in the fifth generation

[@randomscience4k]

That’s the NFC chip. Without that Apple Pay will not work and from watchOS 6 onwards pairing will fail if factory reset without this chip.

[@harrymccarthy936]

Can you fix my watch

[@mohamedelwa5456]

Why u chang this chip

[@Алексей-х2ю9э]

NFC chip needs to transfer to new screen.

[@KevinLugardo]

@@Алексей-х2ю9э no it doesnt

[@markzhang6698]

Can you please help me with information to set my new machine for Apple Watch screen refurbishing ?? TBK-808 AutomaticAir Lock BubbleRemover/LaminatingMachine for 13"Screen Setting for the machine to do Apple Watch series 2/3 screens screens Vacuum Set……. Laminating Time….. Debubbler Time….. Debubblers Temperature……. Setting for the machine to do Apple Watch series 4/5 screens screens Vacuum Set……. Laminating Time….. Debubbler Time….. Debubblers Temperature……. Setting for the machine to do Apple Watch series 4/5 digitizer screens refurbish Vacuum Set……. Laminating Time….. Debubbler Time….. Debubblers Temperature…….

[@aazadparinda3685]

Super work

[@junaidsait2123]

U from

[@alarmsquadnj]

This guy never talks wants to keep it all to himself

[@kescha1995]

Que seas tarado y no te des cuenta es otra cosa

[@centrodeserviciopueblamx5727]

Did you have had have to reflash the iwatch after generic LCD sparepart? I've heard that it exists the possibility where the new aftermaket replacement it can't work properly the touchscreen. So in that case you could need a iBUS flashing tool. Is it true? kzbin.info/www/bejne/pn-3h5quf8misK8

[@KevinLugardo]

no