ScanNCut Name On Edge Of Card

[@anitakli920]

So glad I found you! Excellent tutorial.

[@juliearmodie3016]

I have only just found this as I searched for using the new small pen holder, I have learnt a few tricks I didn't know about such as the centering, and the best thing I have learnt here is the easy way to do a SCORE LINE!!, YIPPEE!!!, being vision impaired, it is a nightmare doing score lines in canvas workspace, THANKYOU so much, and I love your card too, LOVE the colours.

[@applelover53]

Great glad to know it helped thank you

[@carolbarlow2381]

Thank you so much ,you speak so clearly and you talk us through every thing you do ,I am learning so much from you xx

[@pol2171]

Thank you for this great tutorial video. I have used this to make a card for my Granddaughter who is turning 8 and I love it. Your video tutorials are very detailed and easy to follow, thank you for your great efforts, they are much appreciated.

[@applelover53]

You are welcome thank you

[@zuekeeper]

What a great idea for a personalized card. So special. And you did it all right on the machine!! Thanks!! 😬

[@petmomful2260]

Thank you for this cool technique! My new machine is on order and I should get it in a couple of days.

[@applelover53]

Great ave fun! thank you

[@paularowson7768]

Great tutorial i have just got a cm900 for christmas and I am going to try this love watching your videos x

[@applelover53]

Thank you glad you like them

[@bonniekitt1]

Great tutorial. I really appreciate it when you do tutorials using the machine because I only have an iPad and I don’t like using it for scan and cut canvas. It’s too cumbersome . Other than the glare (LOL) it was a great tutorial. 😁 thank you for taking the time to do these as this is the only way I can learn how to use my machine to its fullest capabilities.

[@applelover53]

Thank you I dont like Canvas on iPad either, the day i recorded this video it was dark, wet and snowing and then in the middle of my recording the sun came out and i couldn't get away from it. I will try and do it again on a wet dark day or one night. thank you

[@heatherwills3842]

I need to explore more of what I can do on the machine as I’ve worked in Canvas for most of what I’ve done. Great tutorial, thank you. I did have a slight problem seeing some of the details on the screen of your machine due to glare.

[@tonie1106]

I love this tutorial and I was wondering, can you use the draw function to draw the “happy birthday” stamping if you don’t have a stamper. Thanks for sharing.

[@applelover53]

Yes you can use the SNC to draw the greeting and cut out a shape for it too

[@clairehutton1851]

Thank you for the great tuorials, I am learning a lot.I remember you being the best teacher for my Pazzles in the past.

[@alanandbrendagreenwood8941]

Hi Ashley, what a wonderful card. Unfortunately, the sun came out an obliterated some of the screen for a while, but you are always so innovative and helpful. Thank you.

[@applelover53]

I know sorry, I tried to adjust the lighting but couldn't do anything with it. I will try and make it again I may do a live session on it

[@doreenredley5905]

Thank you Ashley a great idea

[@craftingqueen7596]

Thank you so very much!!!!!!! Your tutorial is so helpful! I just couldn’t seem to grasp the Canvas Workspace method for the number birthday card, even though I played both your tutorials on a slower speed & followed along! Perhaps, it’s because I’m using SDX model or iPad Pro instead of my desk top computer?! Not sure, but THIS one, I was able to do! 😍 I also see you have other tutorials for a name & number combination card! I shall try that next! 🤩 Thank you for helping me to make a very special card to the most important person in my life!!! 🥰

[@applelover53]

Hi thank you I’ve been on KZbin six years and have lots of videos on my channel I also now use an SDx Disney model machine and do KZbin lives on Wednesday and Sunday evenings

[@craftingqueen7596]

applelover53 you’re welcome & I’ve already subscribed & hit the bell so that I’ll be notified of whatever you do! I appreciate you for letting me know! You’re a really great teacher! I’m probably going to want to upgrade to the Disney model, after watching you create using that one, but I’m still learning how to use this SDX 225 model, so I can’t justify buying a new one! (Not yet, anyway!) Lol 😂

[@applelover53]

If you've got an auto blade machine already you will be fine with that, you should be able to do everything i show except you wont have the Disney designs. have fun

[@suzannesharp4737]

This is such a beautiful card! Thank you so much for another FABULOUS video! You're the greatest!!

[@applelover53]

Thank you glad you like it.

[@georgina201144]

Thank you for posting this video. It took me a while to make mine, but my friend was really chuffed with 5he end result. Thank you for helping me out with inspiration. It was really good and useful. X

[@applelover53]

You are welcome and glad your friend liked it.

[@barbaraking6499]

Thank you sooo much every time I watch your videos I learn something new!

[@beverleypotter3456]

Thank you ashley Great video. I have the orginal snc 600m havent used it to much latley, not dure if it also has the alignment bit that you used unless I have missed an update somewhere,

[@applelover53]

Hi thank you, yes the alignment was in a machine update some time ago from memory. Just go and find the latest update for your model and country from my link www.applelover53.co.uk/scanncut-help-information and you should be ok.

[@beverleypotter3456]

Thank you

[@soniawhite7821]

Thank you so much learnt a lot

[@ellenhofer3343]

This is a great video! Why do you not use the test cut feature to ensure your blade is at the depth to cut?

[@applelover53]

Thank you, I do sometimes but I’ve had my machine that long now I know how it cuts for the majority of the time.

[@SABan-bh4hi]

Hi Ashley .. well that takes me back! I still have my original tutorial I did for the Craft Robo way back in 2006/7. I’m still a Cameo affecionado ..I can make it jump through hoops !! You’re definitely a whizz on the SnC .. mine sits sulking on the table as I hardly use it The touch screen sends me mad .. can’t see a thing! Old age and all that!

[@drwoo6090]

Awww you made that just for me! 😀 Wendy ! Great video. Thanks!

[@paulbailey7940]

I see this video has been acknowledged on the brother UK facebook page Ashley,

[@applelover53]

Hi, yes they post about my videos from time to time which is lovely of them thank you

[@sylviaevans3756]

Fantastic vid, I have watched and tried this so many times and still can't seem to get it. I think I know what I'm doing wrong, I'm lining up the box round the letters instead of the letters if that makes sense. I love your vids but I'm an amateur so pardon.

[@yaowamarnjunlapun5514]

thank you for tutorial. What mat did you use? I got CM900 but those mat looks different.

[@applelover53]

Hi sorry that’s an old video so I don’t know but if it doesn’t look like a ScanNCut Matt it may be one that somebody sent me to try out

[@tammybeichner5763]

Love your videos, they are so helpful

[@applelover53]

Thank you

[@StampingWithIan]

Love this project, I have just picked up CM900 and am watching lots of videos, this really caught my eye tho. TFS :)

[@applelover53]

Thank you I have lots of SNC videos on my channel.

[@classiccreations1597]

that's so beautiful. ❤❤❤

[@alariaferraris5012]

Thank you for this video, not used my machine much and I was doing ok till it came to the cutting the card with letters on, my word was DAVID, and it totally ccut the letter I out, so wasnt anywhere for me to place the top letter I. Otherwise loved what it did. Thank you.

[@ellenhofer3343]

I think at one point she used the weld button that attached the letters to the card.

[@mistycork1960]

This is wonderful! Thank you!

[@vallennon6081]

I have just started with my scanncut and trying this card. I cant seem to get the name to cut out, can anyone help me with this please.

[@applelover53]

Can you be more specific with what you cannot do

[@vallennon6081]

@@applelover53 Hi, thank you for replying, I managed to work out were I was going wrong after watching a beginers tutorial of yours. Yhanks

[@valclements7092]

Great video thank you Val🇨🇦

[@marciapearson711]

Thanks for such an informative and clear instructions to make a card.may add the age numbers as well if it can fit

[@ToniHanegraaf]

Hi all, I love card making but I just can't seem to make this card the way the video show us with the SNC DX1000. Has anyone else had trouble with it, if so do you have a way of helping me?

[@applelover53]

Why can’t you make the card, Please explain what point you get stuck

[@christinerhoades9534]

Great video. Thank you

[@pampierce5710]

Hi , I’ve just had a ScanNcut cm900 , I’m totally lost with it , found your video , you are very clever , unlike myself I get lost along the way even pausing it doesn’t help , would be good if u could do a step by step guide that I could follow I would be willing to pay for this , there is no where that do a book on how to use , feel there’s a gap in the market for you 😂 kind regards Pam

[@applelover53]

Hi if you go to my youtube channel applelover53 and select playlist i have all my videos broken down into playlist, look in the beginners one and you should find help. the video you have looked at is not really a beginner video, it assumes you know about the machine in some detail. i dont have a step by step or the time to do one sorry. but the beginner videos should hopefully cover what you need to know to get you up and running.

[@cherylboulding632]

Thank you for this

[@andreaadams1888]

Fabulous idea & card looked fab when complete. Can I ask about your craft studio?? The section behind your desk that scissors etc hang... Where did you buy this?? Also the pink handled tool?? Is this a hole punch?? Many Thanks Andrea (Triple A Crafts, Newtownards Co. Down Northern Ireland xox

[@applelover53]

The section behind my desk is called peg board i bought it locally, the pink handled tool is my crop a dile is a heavy duty hole punch. thank you

[@MariaAguilar-vs9fb]

Love it! What kind of mat are you using? Curious since brothers are pricey.

[@applelover53]

Thank you, it was one i was sent to try out there will be a video on my channel soon. Thank you

[@cynforrest]

Incredible!! Thanks so much. I’m learning a bunch from you and I’m very grateful you provide this instruction! BTW, what’s under your SNC machine - is it a cushioned pad???

[@applelover53]

Thank you glad they help, its my quilted mat i made with the ScanNCut there is a video on my channel, Have a look in either SNC Canvas or Janome "playlist" you should find it.

[@brendamorgan3881]

Another great video Thank you x

[@shirleymanuel6926]

Hi loving the video but the screen is too light.♥️

[@applelover53]

I know sorry, I tried to adjust the lighting but couldn't do anything with it. I will try and make it again I may do a live session on it

[@denisejohnston6243]

I dont think I would try this, seems like lots of work..

[@applelover53]

its easier in canvas workspace, but in that video i wanted to show that it can be done directly on the machine, thank you