How To: Frigidaire/Electrolux Inner Tub Assembly with Spider and Shaft 131618500

[@tammyt892]

Matt, Your the best! You are very thorough and simplified without all the extra needless chatter. thank you so much!

[@appliancepartspros]

Tammy T You are welcome! Glad the video helped you get the washer fixed!

[@venus2012ful]

@@appliancepartspros do electrolux washers have corrosion problems with spiders like samsung washers?

[@andrewgleeson4449]

Awesome video - many thanks! In the end it turns out the part is more expensive than I am willing pay for an older washing machine, but saved me the money for a technician to come out and tell me it'll be an expensive repair bill

[@appliancepartspros]

Andrew Gleeson Glad the video helped you decide!

[@suesheane3671]

This was a big help as you were working on my own model machine and I was stuck on a few items . Thanks

[@naunksa1]

Thanks so much!!! Followed step by step ended up finding a torn up sock on the spindle!!! Had to take the whole thing apart just to get behind the rear drum!!! Awesome video!!!!

[@appliancepartspros]

You're very welcome! So glad the video helped you out with your repair!

[@k.jaskula8388]

First video with putting grease for the simmering. Good job!

[@appliancepartspros]

Thanks glad the video helped you out!

[@coveylane]

This is still a great step by step video. (Including steps to put it back together where others have just said reverse the process). First time I did this I replaced the rear drum which really wasn't that expensive from Sears. This time I replaced just the bearings and seal so I had to go to another video and then back to this one. Total cost was about $40. I have one suggestion, use a Robertson screwdriver in a hand drill. much faster. and screws don't drop out like Philips screwdrivers. Those screws are designed for both types.

[@shaggyda2758]

Another Great Video!, Thank-You guys for taking the time to show us how to do this job.

[@oarslan6350]

Thank you for the information and the video is helpful for me. Have a nice day.

[@appliancepartspros]

Glad we could help!

[@MoonContradiction]

19:51 Don't forget to install the seal between the halves of the tub assembly

[@appliancepartspros]

Thank you for that reminder!

[@joecox9958]

thanks! how to replace the bearing？

[@ssoh87]

With the pulley bolted onto the tub, I am able to slighty push and pull the pulley into and away from the tub. Is this supposed to happen?

[@appliancepartspros]

Give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

[@TheEdisse]

Fantastic video! thank you!

[@appliancepartspros]

+TheEdisse Glad the video helped you out!

[@EnzitOuu]

Hi i need to know if the spider support from the tub 137105900 work in this washer GLEH1642FS0. I know the part number its different but maybe there is a possibility.

[@appliancepartspros]

Hi there. Based on your model number, this is the one that I show as being compatible with your machine: www.appliancepartspros.com/frigidaire-inner-tub-assembly-131618500-ap2107258.html

[@ElaLollies]

how to repair or replace spider bracket bolt on a Haier XQG50-11?

[@appliancepartspros]

Eladia Benson We do not have a video for this. It looks like the spider is accessed through the rear panel.

[@ElaLollies]

Is it possible to send you a pic of the schematics so that some pieces I don't know of by name you could help identify as they are numbered. Also, is there a trade school you may know of to train in this field which I find fascinatingly interesting? 😳

[@appliancepartspros]

Eladia Benson You can give us a call at 1-877-477-7278 and we will do our best to help you get everything you need. You can also post the problem along with the appliance model number on our repair forum and the techs can help you with the problem. KZbin is not the best place as we are limited in what we can post. Many schools have appliance repair training, just do a search in your area!

[@ElaLollies]

Ok thank you

[@davejanssens7490]

Do you guys have also bearrings for a european Bosch washer?

[@appliancepartspros]

We only have access to models sold in the US!

[@davejanssens7490]

AppliancePartsPros okay tnx

[@bones007able]

dumb question.... why didn't you just unbolt the counter weight instead of wrestling all the extra weight?

[@appliancepartspros]

The way the washer is put together you cannot remove the front weight when the tub is installed. Once you have it out it is just as easy to lift the whole front half of the tub off in one piece.

[@Android_Warrior]

Why don't you replace the water seal?, once you disturbed the seal you should replace it like your suggested the tub one. The main water seal is what actually cause the bearings to fail.

[@appliancepartspros]

+Android Man It is always good to inspect them and changed them if needed. The reason we do not say, just change them like the tub seal is because they are only sold with the outer tub, which can be expensive.

[@Android_Warrior]

I would like to have the extra expense that to have a call back for a water leak and agravate the customer in the process.

[@giuseppepentassuglia1751]

Perche la mia lavatrice non si accende più prima si sono accese tutte le spie e adesso non si accendono più .ma mene sono accorto che sotto la lavatrice c'era un po di acqua che era caduta dalla caldaia ed ora che cosa devo fare che non si accende più .un consiglio da un esperto

[@ahmedhsny4270]

Thanks for your trouble

[@appliancepartspros]

Glad the video helped you get the washer fixed!

[@Android_Warrior]

Have you heard about a thing called POWER TOOL!

[@appliancepartspros]

+Android Man We use all hand tools so we do not strip or break anything!

[@Android_Warrior]

That's great but if you are carefull and watch the torque setting in your power tools like I do you don't have those problems and save time in the process.

[@MicklowFilms]

@@Android_Warrior Power tools can still strip threads even if you are careful and have the torque turned down.

[@thebearsden1701]

Great vid...but I,'ll buy you a batt. Impact driver...lol

[@MicklowFilms]

Why? You'll strip threads... It's plastic!

[@apoabduaslllan8896]

f h's مأهولة ي

[@apoabduaslllan8896]

مرحبا بكم فى