Applications of Lines_Level 3_Problem 6

[@zig1792]

Sir explain the principle of how this steps work

[@ahmedwaseem6207]

Tomorrow is My EG exam.... you saved me sir..if I would've found u early,I would've scored centum...hats off 😀😘

[@MangoMan-cd1xy]

bhai relatable moment...mera bhi kal hai paper...help kar dena plssssssssssssssssss

[@ahmedwaseem6207]

Engineering khatam ho gaya bro 😂

[@MangoMan-cd1xy]

@@ahmedwaseem6207 paper Kaisa gaya phir??

[@Guptajiisonline]

Mera chalu hogya 😢​@@ahmedwaseem6207

[@Randomshahzaib]

Sir you are the best geometrical drawing teacher I was very tensed about my college exam but your videos helps me a thank you so much god bless you

[@pavansankar2901]

This is our core subject and your are very helpful for me sir....I scored good marks only because of u sir..... Thanks a lot sir.......

[@ManasPatnaikofficial]

Hi Shashank…Thanks for appreciating my work…and congrats for doing awesome in examsI am sure this channel has helped you learn…You can support my channel by donating and do watch this video: kzbin.info/www/bejne/jZfchnierc2dkLd8ave a nice day.

[@ShubhamGupta-xf6xi]

A straight line PQ, equally inclined to the HP and the VP, has its end P in front of the VP and 20 mm above the HP. End Q is behind the VP and 40 mm below the HP. A point on this line is in the VP and 10 mm below the HP. Draw the projection and finds TL and inclination of line with HP, if the distance between the projections ends is 60 mm.

[@anshchauhan8552]

Line is in second quadrant. How to show the projection

[@radhikaagrawal7949]

a line AB 75mm long is in the second quadrant with the end A in the HP and end B in the VP the line is inclined at 30 deg in the HP and 45deg in the VP draw the projection of AB and find traces.

[@NEVILS_GAMING]

A line PQ, 100 mm long, is inclined at 30˚ to the HP and 45˚ to the VP. Its mid- point M is in the VP and 20mm above the HP. Draw its projections, when its end P is in the first quadrant and Q is in the third

[@abhayraj5956]

Sir which software are you using?

[@muhammedyasi]

Useful video 👍👍.Is the FV of point Q ,q' and TV q?please reply...

[@rohitrathod1268]

Sir when we check the true length .it is not found to be 100 mm

[@sanketsonaye31]

A rectangular room, a peg is drawn at the centre of the floor. Another peg is drawn at the midpoint of the common edge between the two mutually perpendicular walls. The minimum length of the thread connecting these two pegs is 5.5m. The thread makes 300 with the floor. The TV of the thread makes 400 with the longer wall. Find graphically the size of the room.

[@rajeshbora2013]

What if m divides pq in 4:5 ratio?? Can u explain the approach sir?

[@tanmay7951]

A line PQ 100 mm long is inclined at 30° to the H.P. and at 45° to the V.P. Its mid point is in the V.P. and 20 mm above the H.P. Draw its projections, if its end P is in the third quadrant and Q in the first quadrant.

[@Anubandhamfreematrimony]

Sir what if there are no inclinations and given like this end A is 10mm in front of VP and end B is nearer to HP in this midpoint sum please help me with this doubt sir

[@sciencelunatic2979]

Shouldn't we rotate q1' and then drop a perpendicular to locus line thru q to get Q? Why is it done in reverse?

[@MOODY_SP]

A line PQ, 75 mm long, has its end P in the V.P and the end Q in the H.P. The line is inclined at 30 degree to the H.P and at 60 degree to the V.P. Draw its projections. Sir how to do this kinda problem?

[@tushxrm2468]

Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject . So blessed You are doing a great job sir ! Respect

[@AnjaliKumari-cv2hl]

❤

[@loneboy9232]

A 80mm long line AB is inclined at 30° to the H.P. and 45° to the V.P. Its midpoint C is 25mm above the H.P. and 45mm infront of the V.P. Draw its projections.

[@ronniedrake2281]

Aren't we supposed to make the full true length of line PQ by extending it backward from mid point? You just extended apparent one(s). Just a doubt, try to answer.

[@ManasPatnaikofficial]

This is the half-line approach.... And this seems to be very easy and casual.....

[@bhushansingh3825]

Sir what we have to do when the angle above HP is no given??

[@dextermorgan6881]

This deserves more views

[@mustafadahodwala4465]

A line PQ, 80 mm long has its end P 15 mm above the HP. Line makes an angle of 30o with HP and 45o with the VP. End Q of the line is 10 mm in front of VP. Draw the projections the line considering it in first quadrant. How to slove this question

[@randomjitters]

p'q1' is supposed to be true length but here it is not so?

[@Alif_788]

God bless u sir ,u r really doing a great job ,,ur vedio's really helped me a lot ,once again i heartly express my gratitude to u for this noble cause ,stay blessed ,rise and shine

[@ManasPatnaikofficial]

Hi Arif..... I am sure that these videos are helping u learn... Keep watching and do let your friends know about this channel so that they can also benefit.......

[@abhilashmathew7827]

can you make video on how to do reverse of this problem when angles with vp and hp is not given but TL is given.

[@rohith_aaryan]

King 👑 of ED

[@suraj_naik_7]

You are so helpful sir You did a lot for us which our sir couldn’t : in lines n in planes also ! Thanku once again 🔥🔥🔥

[@hanupawandwivedi6613]

What if m is not mid point but at random distance from q please upload this type of questions

[@muktheswarreddy9060]

the midpoint of 80 mm long line is 30 mm above hp and 30 mm infront of vp the line inclined is 30 degree to hp and 45 degree with in the vp draw the projections of the line Pls say solution

[@aslamshaik3422]

Sir what about when other end point lies in second quadrant pls explain Sir

[@thegoodgoing]

tum bhut acha kaam krta hai maksood bhai.

[@ManasPatnaikofficial]

All the best Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@Comeonindia17]

Sir I have two problems relating mid point that u hv not covered .how can I contact u?

[@ManasPatnaikofficial]

Shiva....add me on FB messenger and post the problem description.

[@sahilbhand7038]

Why can't we draw full line and then from Q draw projections to loucs line of P. And further solve like normal problems

[@अण्वायुवरीवर्त]

hey that was good but I want to know the lengths of PL & EL

[@pbeeeeee7]

Superb explaination

[@Himanshu-jx9kw]

Thanks a lot ...it helped me to prepare for exams day before it.

[@ManasPatnaikofficial]

Thanks Himanshu for the appreciation All the best... And do let your friends know about this channel so that you all can benefit...

[@adarshshukla5483]

Sir I will make this figure on exam but in ND bhatt book figure is not given this type so sir mark will be given me on this question or not

[@dharanichinta8984]

sir,what is the book that u r refering?

[@ManasPatnaikofficial]

I refer ND Bhatt and PS Gill... These are the two best books on engineering drawing.............

[@dharanichinta8984]

Manas Patnaik Thanq sir😊

[@abhishekdutta8968]

sir....can you solve few exercise problems [10(b)].... they're pretty difficult.... anyway awesome video

[@atharvakushare85]

Sir what are the imp topics for FE 1st Semester

[@priyankdabhi6350]

Very helpful

[@ManasPatnaikofficial]

PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: kzbin.info/aero/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu

[@Smurfy2907]

Very good explanation sir thank you so much 🙏

[@ramchhabra5694]

Nice video sir ji

[@ManasPatnaikofficial]

Hi............. I am sure my videos are helping you learn..... Keep watching and do share this with your friends also... All the best......

[@vinayvanam7661]

Sir can u upload more problem like this one

[@abhishekas3791]

Awesome sir😊😊😊👌

[@satyasivakolluru3906]

sir can u solve this problem. A point M is 50 mm above HP and 15 mm behind the VP .and other point N is 20 mm below HP and 30 mm in front of VP. the distance between the projectors of M and N is 70 mm. (1)draw the projections mn and m'n' of the line MN. (2) determine the traces of line joining M and N. (3) determine the inclination of straight line with reference frames. (4) determine the true length of MN. please solve and upload sir. I suggested u r channel to most of my frnds and still i will suggest to my coming juniors. thanking you, SATYA......

[@saikiranbonu2098]

Sir I have a doubt sir

[@sheikhshezan8068]

thanksssss alotttttttt ❤️...May god bless you 😊

[@ManasPatnaikofficial]

Hi Shezan..... I am sure this channel is helping you learn... All the best.....

[@rutvikdangarwala9496]

sir can u tell alpha and beta here!? so that i can check my answer

[@ManasPatnaikofficial]

Rutvik........Alpha is 45 deg and Beta is 55 degrees....

[@rutvikdangarwala9496]

Manas Patnaik thank you very much sir

[@outofonesmind6722]

Where is the true length sir

[@ManasPatnaikofficial]

Please watch the video again my friend....

[@unpluggedcoversongs2648]

very helpful sir

[@narasimha22]

Sir can you explain this sum please A line AB 100mm long measures 80mm in front view and 70mm in top view. The mid point M of the line is 65mm from both HP and VP. Draw the projections of the line and find it's inclination with the planes of reference HP and VP

[@goutamdas838]

sir can u send me one video in related to second quadrant and fourth quadrnt ppppppppppplllllllllllzzzzzzzzzzzzzz i mean similar to above question

[@SahilGupta-wc2ev]

Sir i want to ask ques

[@ManasPatnaikofficial]

Sahil Gupta yes sahil.....go ahead...whats the matter

[@radhikaagrawal7949]

sir plz help me over this problem

[@ManasPatnaikofficial]

+radhika Agrawal WHat is the issue radhika......

[@radhikaagrawal7949]

+Manas Patnaik sir i m not getting how to solve this problem..

[@Lucifer25189]

Thanks❤❤

[@thebrahimkhan]

Thank yu . It is really helpful

[@tdeva]

Thank you very much sir

[@vahidpatel3516]

Hello sir WhatsApp

[@divyanshubhagat3461]

Thanks Sir

[@deepakchoudhary865]

very helpful

[@TarunKumar-ed4ke]

Thanks sir ,love you

[@ManasPatnaikofficial]

All the best Tarun.....

[@ajayzade216]

Thank you sir

[@ManasPatnaikofficial]

+Ajay Zade Hi Ajay.... You are welcome.... All the best

[@shravanpatel3187]

Technic achhi h sir

[@janardhanam8818]

Tq sir

[@AnjaliKumari-cv2hl]

Hello

[@sohitrahangdale25]

Bhai Hindi mein bhi bol liya kar

[@Randomshahzaib]

Sir you are the best geometrical drawing teacher I was very tensed about my college exam but your videos helps me a thank you so much god bless you

[@mishalrais]

Thank you sir

[@bilalkureshi7437]

Thanks sir

[@Sa-mj5ms]

Thank u so much sir