Traces of Lines_Level 4_Problem 3

[@Sadiya_Majeed]

Thankyu sir!!.. I solved this problem myself without referring to your way of solving it..and I got the exact same values of the various parameters as u have got...nd its all because of ur previous presentations on traces... M really thankful....tysm u r really doing an appreciable work👏👏... Hats off!!

[@ManasPatnaikofficial]

Well Sadiya, it am so happy reading your comment.. I am sure these videos are helping you learn the concepts... All the best and do let your friends know about this channel so that they can also benefit.....

[@tushxrm2468]

Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject . So blessed You are doing a great job sir ! Respect

[@KIDA-WAV]

Sir all of Ur videos have been very helpful to us. But I truly feel there must be a level 5 in the projections of line with much less info given in prblm

[@sarithajagarapu4728]

Excellent sir chala baga explain chastaru .............it is very useful to me👌👌👌👌👌

[@sam74209]

Sir, I have a question.Can you give me the solution of that question. Q.A straight line CD, 78 mm long, makes an angle of 410 with the H.P. and lies in an auxiliary vertical plane (A.V.P.), which makes an angle 390 with the V.P. The end point C is located below the H.P. and behind the V.P. The end point D, which is located on the right side of C, is kept 23 mm above H.P. and 19 mm in front of V.P. Draw the orthographic projections of the line and find its inclination with the V.P. Also locate the traces of the line.

[@sam74209]

410 is 41 degree and 390 is 39 degree sir

[@fathimam1351]

thank you so much sir.aplode more videos as year question. and you are my eg teacher.happy new year sir.

[@omeshdewangan3352]

Manas sir very best end classes Manas sir I am happy This year 1 semester b.e. 11th exam ed 1sem Thanks sir

[@ManasPatnaikofficial]

Hi Omesh..... Thanks for appreciating the content... All the best and do let your friends know about this channel so that they can also benefit....

[@VishalTiwari-jj7sv]

Thanks Manas Sir I was stressed because of this subject but you made it so simple for me... I appreciate the hard work you have did for us... Thank you so much... 🙏🙏🙏🙏☺☺ I'll try my best to increase your subscribers 🙂🙂

[@ManasPatnaikofficial]

Not to worry vishal.... Just keep working hard brother and chill..... All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@achryaff9951]

Thanks sir it is very use full to me

[@yahiyaansari9090]

line AB is 50 mm long. It is inclined at 39o to the HP and 21o to the VP. Draw its projections assuming the end A on XY line. Also Draw HT and VT

[@adityapanwar6888]

SIr why you have not taken b point 100 mm above xy line. Please help?

[@desmondasareboakye4638]

your are the creator of the universe so much resemblance of the master designer

[@sanjaygaikwad3425]

Introduction to first and third angle method of projection, Projections of points on Principal reference planes and on auxiliary planes including coordinate system of points. Horizontal, frontal, profile and oblique lines, true length of line. Projections of lines with its inclination to one reference plane and with two reference planes (oblique lines). True length and inclination with the reference planes, point view of line. Grade and bearing of line. Angle between lines, intersecting, skew, parallel and Perpendicular lines . I hope you will make videos on these topics also

[@prapoornakalavalapalli8869]

Excellent explaination by you sir....the videos are very useful to us.

[@maheshjoshi5385]

Thankyou sir,it help me a lot,after watching the video,I found it easy which was looking hard for me before,Iam doing it now easily, thankyou once again,keep making such kind of videos,It helps students like us.😁😁😃

[@ManasPatnaikofficial]

Thanks for appreciating my work Mahesh...... All the best man And do encourage and recommend this channel to your friends... Reply ·

[@harshiita8]

Manas Patnaik great work 👍👍👍

[@ranbirsinghshekhawat3388]

Please make videos on projection of line involving auxilary/profile plane.

[@edicteda153]

If some one ask me who was my ed prof. In first year i proudly say manas patnaik

[@ManasPatnaikofficial]

Hi brother........... Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference

[@yashdudhatra936]

Sir I have one question . Can you please soly this : the end A of line AB is 25 mm behind the VP and is below the HP . The end B is 12 mm in front of the VP and is above the HP . The distance between projectors is 65 mm . The line is inclined at 40 degree to the HP and it's HT is 20 mm behind the VP. Draw the projections of the line and determine it's true length and the VT

[@anuragvishwakarma7532]

Lots of thanks to you sir. It's very useful In understanding the EG in my own way.

[@ManasPatnaikofficial]

Hi Anurag........... Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....

[@gokulapriyasivasubramaniya7664]

It is very useful for my exam tq so much sir.u r teaching well than my mam

[@ManasPatnaikofficial]

"Engineering Drawing / Engineering Graphics LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC 8. Development of Surfaces in Hindi: kzbin.info/www/bejne/bqLThaeXibiXeKM -- Manas Patnaik Videopreneur, Teacher and Mechanical Engineer www.manaspatnaik.in kzbin.info

[@aayushshah5472]

Hello sir. Thanks for the amazing videos. One request. It would be great if you would explain assumptions on lines which is a bit tricky part.

[@utkarshgohil884]

Videos are really very helpful.....but sir, plz. Add some videos having much more difficultly level. These will surely help alot. Once again Thanx sir.....!

[@harshiita8]

very well explained 👍👍 n it is really helpful thanks 🙏

[@ManasPatnaikofficial]

Thanks harshita for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@Heyitsme8659]

Sir, there is one query... All the blue lines and angles which are in blue are the important things which we need to darken on the sheet. And rest the black colour line and curves need to be light?. Please clear asap

[@parulsaraogi6770]

Thankuh so much sir ☺️☺️ ur videos really helped me a lott clearing my concepts...😊...

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@subhajit.-.]

Videos and concept r really helpful

[@manavsaini3335]

awesome concepts!!! every doubt has been cleared in videos thnk you sir, but there is no question about line in 1 and 3rd quadrant related question. Teach us those videos too thnks!!

[@ManasPatnaikofficial]

Manav...Thanks for appreciating..... All the best man.... And do encourage your friends also to subscribe to this channel

[@imondutta3476]

Sir it would be a great favour if you could upload a video on side view/end view of Lines....where we have to make profile lines and draw the rest

[@edicteda153]

U r the best sir

[@karthiksirusiruvalam4685]

Thank u very much for your kind blowing and easily understand lectures sir

[@ManasPatnaikofficial]

All the best kartthik. Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@ananthakrishnann8796]

Sir ,is there anything mandatory in naming the points b1 b2 etc or can we just use it just according to the order of naming?Also, my true length in this problem is almost 64 where yours is 54 but all the angles are correct.whats the reason for this bias?

[@ManasPatnaikofficial]

Ananth.... Well this drawing has been made in AutoCAD, so the true length determined cannot go wrong...

[@pavan1896]

Plz cover the concept of projections in left n right profile planes

[@surajtaru2499]

Please sir upload more video's on projection of lines including hard question

[@SaurabhYadav-hh7fx]

thanks for all this

[@vishnumali9126]

line AB 100 mm long is 30 and 45 inclined to hp and vp respectively .end a is 10 mm above and its vt is 20 mm below .draw projection and HT.sir i am finding its solution bt not getting.please help me out

[@TarunKumar-ed4ke]

Wow great lectures , thanks for this much hard work

[@touseefahmed7996]

Sir is there any video for problems including "midpoint of a line"

[@ManasPatnaikofficial]

Here is the link Touseef....I guess this is the problem that u are looking for... kzbin.info/www/bejne/iKLOqIOmiZJ2msU

[@touseefahmed7996]

Thank u sir

[@omeshdewangan3352]

Thanks sir

[@yogitasahu3527]

Sir please upload a video on "line inclined to both the planes" regarding different quadrants...

[@vikalpgupta6819]

Sir i want to ask a question,can u help me out with this? A line 75 mm long is in 2nd quadrant with end A in HP and end B in VP.The line is inclined at 30°to HP and 45° to VP.Draw its projections. I am waiting for ur reply sir

[@ManasPatnaikofficial]

ok

[@ManasPatnaikofficial]

come on whatsapp....[phone]

[@desmondasareboakye4638]

you are so knowledgeable I feel like buying something for your

[@ManasPatnaikofficial]

PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: kzbin.info/aero/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu Watch videos from this playlist instead. It's more professional with better demonstrations.

[@213eeegowtham6]

Sir I have learnt more topics from your videos, but I want one sum in traces with having two projections in 1st quad and 3rd quard ,distance b/w projections are 50mm

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@pesallway]

Sir can you pls hlp me in solving some problems that i have

[@pushpendragautam1605]

very useful for eg . TX for this knowledge

[@ManasPatnaikofficial]

Thanks Pushpendra......for appreciating...... Watch all the content thats available on my channel. And do encourage and recommend this channel to your friends...

[@abhijeetraj2646]

Hi sir the lecture is very useful for us but we got stuck in a problem in which only vertical trace is given , please make some more videos on traces of line

[@abhijeetraj2646]

Sir please give solution of this question or give any hint Q . A straight line AB is inclined 30 degrees to VP . It's end A is 15mm above HP. It's front view is 65mm and makes an angel of 45 degree with reference line. VT of the line is 20mm below HP. Draw the projection of the line and determine it's true length and HT.

[@yuvrajsingh3693]

Thankyou very much 🙏🏻🙏🏻sir ji.

[@Manasak-no1fb]

draw a diagonal scale to show o.1 mm long enough to measure up to 5cm show on this scale the following distance of 2.35cm

[@saitharun5312]

Thanks your lecture are very help ful for me

[@ranjeetKumar-ff4os]

Great video

[@yuvrajsingh3693]

Sir true length is 44 mm please check once.

[@tanmaygupta6796]

Thank u sir

[@ManasPatnaikofficial]

Hi Tanmay....Thanks for appreciating my work…and all the best for your examI am sure this channel is helping you learn…You can support my channel by donating and do watch this video: kzbin.info/www/bejne/jZfchnierc2dkLd8ave a nice day.

[@pbeeeeee7]

Very tricky question but made very simple

[@ManasPatnaikofficial]

Pratik..... Those are old videos.... Watch from this playlist. It has been remastered..... PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: kzbin.info/aero/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu

[@ManasPatnaikofficial]

Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link (PHYSICS): kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@SamrahNaeem]

Thank u so much

[@ManasPatnaikofficial]

You are welcome.... And all the best

[@rushisandukwar4913]

very helpfull..

[@ManasPatnaikofficial]

Thanks Rushi for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@ranjeetKumar-ff4os]

Thank your sir

[@prathameshupadhye941]

amazingly done! tysm!!

[@adithyaanil6510]

ok

[@ec_66_prathamkushwah78]

Sir kya English hai apki lagta hai siir podh luu

[@ManasPatnaikofficial]

Angreji pasand nahi aayi tumhe...... Tension mat lo......lectures Hindi me bhi available hai: Engineering Drawing HINDI: kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU Asha karta hu tumhe pasand aaega

[@pakistanimemes2449]

u are irritating me by chewing something that sounds nasty

[@nihalpandey5675]

Thankyou sir