Applying Tattoo Stencils (To Silicone Fake Skin)

[@DanielYuck]

The Tattoo Journal By Daniel Yuck amzn.to/43NW3CX You can download the list of gear I use or have used right here danielyuck.com/daniel-yuck-tattoo-gear/ Check out my website for tattoo articles, blogs, tattoo gear, tattoo stencils and more! danielyuck.com/ 🚨BLOWING OUT HUMAN SKIN🚨 Blowing Out Human Skin 🩸 kzbin.info/www/bejne/fZS1hHlpnt2od80 Daniel Yuck Amazon Storefront www.amazon.com/shop/danielyuck

[@SkeemieTV]

Im starting tomorrow! Finally traced out my first stencil. You’ve taught me so much already. Appreciate all of your videos man they really gave me the confidence to take the leap.

[@DanielYuck]

Wow this means a lot to me! I truly appreciate your support! I am honored I am able to help you in a better direction and to help you find the confidence you needed to tattoo. Don't hesitate to reach out to me should you ever have any questions along your way, I will do my best to assist you in the best possible direction.

[@Drawing_with_lillian]

Same here

[@huehuehue5192]

Awesome advice with the dehodorant bro, stenciling synth skin with any stencil solution is a pain is the ass! Thank you!!

[@DanielYuck]

Maaaaan when I first started applying stencils to practice skins I would use the rubber felt material skin and it was so messy and such a pain to just work with in general. I had to find tune my process so everything flows the way I see fit. So now I use silicone felt practice skins and I allow my stencil to sit prior to the tattoo. This approach definitely takes more time but has yet to let me down. Once I get the ratios right and the stencil on the skin the way I need it it’s all just taking my time and running those lines. Thank you for tuning in, I appreciate your support.

[@huehuehue5192]

@@DanielYuck ure welcome bro. Sharing and supporting brings power to everyone, the hard part is people understanding it. Ive never tried practice skins rlly but being in fucking lockdown I had to buy some to kill the hunger of my hand u know and also try some different tecnical stuff to come back stronger but man i just bought some stick dehodorant and gonna try it tomorrow. Power to you bro 🤘🏻

[@chazchandler1342]

This deserves more hype, great video !

[@DanielYuck]

I appreciate your support! Thank you for tuning in.

[@fluke808state4]

@@DanielYuck why are my stencils much much lighter than this? Could it be cheap carbon paper? Tried different fake skin, my transfer is very light on skin also...I use speed stick ..please help!

[@fluke808state4]

Actually I just got it dark literally now....not sure how lol must be my technique!!! Practise I guess!

[@kemprengkempreng771]

Cara hapus nya pake apa?

[@Sfffen]

Rub some talc powder on the skin before applying the stencilstuff, it kinda absorbs the excess liquid (like real skin would). I'm having a lot less stencil bleed since doing that trick :) Also: drying it for a couple of minutes with a blowdryer keeps it on really well!

[@DanielYuck]

Thank you for your comment. From what I see Talc powder aka Talcum powder is made from talc, a mineral made up mainly of the elements magnesium, silicon, and oxygen. Some Talc powders contains asbestos, a substance known to cause cancers in and around the lungs when inhaled. Should this be accurate to me I would NOT recommend this approach, I don't think for me personally I would do this on my practice skins either simply because the underlying issues that can occur with powder and build up in the needle let alone those specific ingredients on the skin or around my work station. I use speed stick deodorant when applying tattoo stencils to silicone based practice skins. When applying stencils to human skin I use StencilStuff. It is all in the amounts applied to the tattoo area that will determine the bleed and or how clean the tattoo stencils show up. I will be making a video on how to apply stencils to human skin here soon. My approach upon tattooing is as to keep me from having to touch outside sources such as a blow dryer upon tattooing to minimize any possible cross contamination. For me setting the stencil for 12-24 hours in advance versus using a blow dryer feels right, but to each their own.

[@lynncarter4494]

I'm definitely trying this! I've been free hand drawing... On my fake skin... but, today I'm going to try this! I love it!!!

[@hiraeth1745]

Exactly, me today

[@MrHandsomeferny]

Mr.yuck, you’ve been informing with a lot of new information on tattooing. I just want to say thank you man. You’ve helped me a lot! Keep it up!

[@DanielYuck]

Hey Kirby! Thank you so much for your kind feedback, time and for your support! It truly means a lot to me. Should you have any questions feel free to drop it in the comment section below and I will do my best to assist you in the best possible direction.

[@SagasInStitches]

Thank you! This is the first video I've found where it isn't frowned upon not using Reel Skin or the like. It is way easier to go buy these generic skins off of Amazon than having to import Reel skin, for me at least, so these are the ones I am using.

[@jenniferkillingsworth1532]

I have the hardest time with stencils😅 I just started drawing with a pencil lol. Thanks for the info

[@Kai-Malachi]

Hey Danny Yuck! Thanks for the great tips! Also great practicing on pork belly skin.. that’s how I practiced my PMU. Ok so Speed Stick - solid one? Not gel. That’s my issue is my stencils blur. 🤦🏻‍♀️

[@ecko405theoriginal]

So solid is better ??? I bought gellette gel 🤦🏽‍♂️ that’s all they had at the store near me here in Mexico dang it

[@OakAthainNerin]

Does it have to be speedstick or just any deodorant?

[@junism67]

any see through deodorant

[@summerdragonsdraws1539]

Are there any alternatives you can use instead of the speed stick?? I'm having major issues getting my transfer paper to actually transfer my tattoo designs on fake skin. I cant for the life of me get it to all transfer like at all. I'm drawing the design and everything right but it just wont transfer. I'm a new to the tattooing thing so I'm tryna figure out how to practice to the best of my ability

[@janelleunzueta2635]

Omg this question right here RELATABLE ! Someone help us out y’all

[@neobangpegasus]

Dude your method works flawlessly thankyou so much

[@letmusiclivee]

Spent all day following this and I went through 13 stencils on reel skin before giving up. I just can’t get them to stick at all and it’s honestly so devastating. I’ve tried speed stick and stencil stuff and it’s not working. The stencil is the most stressful part of the whole process for me. I looked up so many tutorials but unfortunately doesn’t work for me. I practiced applying stencils on human skin (not tattooing) and it was so much easier! Why must silicone be complicated lol For me, the issue is when I lay it down and put pressure, it won’t fully transfer. I make sure to coat the product and let it get tacky but maybe I let it get too dry? But then when I don’t wait long enough, it bleeds. Honestly most difficult part.

[@letmusiclivee]

Okay! I figured it out. Turns out you should definitely wash it in dish soap before applying the stencil. After doing that and applying pure alcohol beforehand and then using speed stick, the stencil is so clear!! Thanks again for an awesome video Daniel.

[@WhataTofu]

im having the same problem even after washing it with wipes and alcohol. The stencil doesnt transfer and the lines are feint. However if i apply it on my real skin, its perfectly dark... if i can show you pictures

[@WhataTofu]

ive tried reel skin and a pound of flesh and they both didnt transfer well

[@armanmatin2156]

@@WhataTofu try speedstick non powder version. I was struggling until i got the one that is blue in color

[@DanielYuck]

I can fully relate to you and understand what you are going through with this. I will do my best to assist you in the best direction. I also apologize for the delayed response. There are a couple of variables I consider upon applying tattoo stencils on silicone fake skin. I consider the felt. Is the fake skin surface smooth? Is the fake skin textured? This would help me determine if I am going to need more or less speed stick for the fake skin. If I apply too much speed stick I will get blurred lines, If I under apply the speed stick I will get light to no lines at all. So we have to find a good blend and find that sweet spot. I always just do my best to apply the stencil and press down evenly as best as I can upon applying. Don't hesitate to reach out to me should you ever have any questions along your way, I will do my best to assist you in the best possible direction.

[@keepitlit9274]

THIS WAS THE MOST HELPFUL VIDEO OUT THERE!!

[@kayo2772]

Wooza you are a great teacher. Thanks for your knowledge. Learnt lots.

[@DanielYuck]

Thank you for the kind feedback and support! I appreciate you. Don't hesitate to reach out to me should you ever have any questions along your way, I will do my best to assist you in the best possible direction.

[@kayo2772]

Hey Daniel where are you guys located?

[@jerielyork4399]

Thank you for explanation of how to do that the right way or a better way 19 coming out blurry and double printing swelling and night you just showed me a new way thank you😊

[@breannaalvarez7114]

I have been struggling with my stencils. I can't wait to try these tips. I really wish I knew about removing the stencils I have a few terrible ones I can't not get off at all now 😅

[@adreaunaduffie512]

and that drawing is beautiful btw😍😍😍

[@DanielYuck]

Thank you! If I’m correct I found the design online and made a stencil on my iPad.

[@kjp2314]

Okay but THAT PIECE!!!! OMGGGGGGG. I want that!!!

[@jacenburchell683]

Great video. I use Reelskin and recently they changed their material. It doesn't absorb stencil stuff like it use to. I had to have the PERFECT ratio and still it came out shotty. I will try the speed stick trick for sure!

[@DanielYuck]

Ahhh I have yet to hear about that product yet. I will have to look into that skin. Does the stencil stick well to the material ?

[@DanielYuck]

Stencil stuff I use on human skin, but with silicone felt practice skins I use simple speed stick. Speed stick works great for transferring stencils onto a practice skin.

[@jacenburchell683]

@@DanielYuck Once you get it to finally transfer you definitely have to wait several hours if not a day. After that you might get 1 wipe then it's gone! I usually line as much as possible and dab the ink away. Once the important lines are in I wipe everything off and basically start over. Not a good method for human skin but good practice for trying to keep your stencil. I have reached out to Reelskin several times, with pictures of the old vs new material and they haven't responded...

[@DanielYuck]

@@jacenburchell683 Yea I learned early on that I was going to have to apply the stencil at least 12 hours in advanced prior to tattooing. So the day before I am going to do a tattoo on a practice skin I will take 5-10 mins to apply the stencil and I forget about it until the next day. I used to get frustrated and think it was me upon trying to tattoo silicone skin haha. It requires A LOT of patience and persistence to get everything right, in terms of ratios for stencil applicants, stencil size, etc. After we get it a few good tried under our belt it starts to all become 2nd nature.

[@letmusiclivee]

Did you ever find a method? I’m using reel skin and it’s more stressful than the thin amazon skins! I get those to stick so much better than I can even get on reel skin.

[@beeblebomb]

thank you so much for sharing the wisdom! Im learning so much from this channel

[@paparexgaming3689]

great vid dude :)

[@zGOSHD]

Hi man, I was wondering does apply the stencil only work with speed stick brand, or can you use any type of gel deodorant?

[@armanmatin2156]

After much trials, different skins and both green and purple Spirit paper, I realized it HAS to be speed stick blue deodorant, and not the powder stuff

[@DanielYuck]

That is 110% correct. I do NOT recommend using any powdered form of deodorant to apply tattoo stencils on fake skin. I would recommend to use the clear version of speed stick which is a green blueish transparent color.

[@ripper9112]

@@DanielYuck Ocean surf or original?

[@alfonsocanoiii7225]

Good ol speed stick, detol also works decently on the fake skin

[@DanielYuck]

I love speed stick on fake skin as it works perfectly fine and well I will add. I use speed stick for fake skin only and for human skin I use Stencil Stuff.

[@jaymgtowgaming3907]

Hey Daniel I’m literally a beginner! I’m confused as to how to actually create the stencil itself. I know some people use the printer, but how do you just draw it? Can you use any photo and just trace over it? What kind of markers do artists use to draw the stencil itself? I was reading I need to buy a dip pen, whatever that is? Stencil fluid? Then something about a fine tipped ink pen? I thought they drew with markers? Please help! I just got my first tattoo kit. I ordered the same fake skins from Amazon and I want to be well prepared!

[@DanielYuck]

I made a video on how to make a stencil with an iPad but I don’t think that would be beneficial here. The idea behind creating stencils is fairly straightforward and there is multiple ways one can make a stencil especially in today’s age. You can use for example spirit stencil paper and just free hand a design onto the stencil paper with any pen or pencil , or you can trace over a printed design right on top of the stencil paper itself. If you’re just beginning that’s how I would approach it. Fake skins are a MUST HAVE when we are just starting. This is the best way to learn and develop. I don’t encourage anyone to practice on human skin. Furthermore, Let me ask what tattoo kit did you pick up ?

[@jaymgtowgaming3907]

@@DanielYuck thank you! Yes I was going to draw it since I don’t have a thermal printer. I got the Atom dragon hawk pen. It was recommended to me. It’s very sleek and easy to hold. It was about $115. I’m going to start using it this week. It came with a lot of stuff. I was told to just use the ink that it came with on the fake skin only because it’s cheap

[@DanielYuck]

@@jaymgtowgaming3907 I wouldn’t use the ink that comes in tattoo kits unless it’s from a reputable company. That seems like a good buy! Keep me updated and let me know how you like it upon tattooing. For the stencils I would just draw them in as well. When I started I drew my stencils in manually but that beat up my hand and used a lot of energy so I went digital. But that’s subjective and to each their own.

[@perriwinkle7779]

I been trying to find out if you have to have an apprenticeship before you can have your own shop?

[@DanielYuck]

That’s a good question! I don’t know an exact answer as there are many many variables to consider as well as stipulations. What I mean by that is some tattooist progress quicker over others, some are able to get an apprenticeship and some aren’t. I think 1 would be ready to get into a shop when the skill sets and practices are of a certain caliber. I don’t think there are golden rules stating 1 would have to have an apprenticeship prior to owning a shop, more so 1 would have to have the correct and appropriate skill sets to correctly and effectively run a shop. I hope this helps in some way shape or form.

[@knrpb5662]

hi. at first.. great video as always man! but i have a question.. every time i try to make a fine line rose stencil, the lines are really thick, after i let it dry. so when i place the stencil, it‘s all good and the lines are as thin as i want them.. but after i let it try i almost could use a 9RL.. and i just wanna make 1RL lines.. i don’t know how to stop that.. please help😅🥺

[@DanielYuck]

Hey thank you for your support and feedback! I appreciate you. I know EXACTLY what this could be. When I place the stencil down and IF I leave the stencil with the excess amount of speed stick it has this causes the lines to blur, bold and potentially bleed into one another or in general. So what I do is I get a napkin and place it over the stencil and press firmly to remove the excess speed stick and remove the dark outline which will give us a faint outline that will not bold out in this manor. If I am correct this should resolve your issue. Please let me know if this helps. Don't hesitate to reach out to me should you ever have any questions along your way, I will do my best to assist you in the best possible direction.

[@jackhartsough3]

Your channel has been soo helpful thank you 😊

[@brandonpadilla1953]

The problem I have with the current fake skin I have maybe cause it’s cheap is that when I wipe the excess ink it smudges a lot and leaves a big black shade smudge I hate it I have to use petroleum jelly to remove it but doesn’t usually get rid of all the black smudge just a decent amount

[@Runitup84]

Always us this as a reference when I tattoo fake skin.

[@DanielYuck]

That is awesome! I truly appreciate your time, feedback and support Run! Should you have any questions feel free to drop it in the comment section below and I will do my best to assist you in the best possible direction.

[@ignoresxk1]

fake skin is somewhat pourouss so that was a good tip on the application process

[@mamawarrior]

Thank you for thos very informative video!! Do you have to use speed stick?

[@mara.skrtskrt]

could you pls post a vid of you practicing on the fake skin to show how you wipe the stencil/ink away or do you leave the stencil there?

[@mara.skrtskrt]

Nevermind! Just saw you have vids like that!

[@DanielYuck]

That’s a good question! When I use silicone sake skin, I allow the stencil to sit and set for 12-24 hours. When that time passes I get Vaseline, work it into the silicone and simply wipe away. This leave me with a very faint purple stencil outline that doesn’t go away so it’s perfect. I have a video here showing exactly how I wipe. kzbin.info/www/bejne/nIHPipichs1kn6c Most of my videos are of me explaining certain things with tattooing, and I use this practice skin. My name is Daniel, If you have any questions at all please feel free to reach out to me 🤝

[@Ballard77]

saved my life, im having so much truble with this shit thx

[@jessicaklco2090]

Thanks this was the best descriptive video I could find for applying trace paper to silicone. Subscribed ✅️

[@baddabingbaddaboom6818]

okay so this technique worked a little too well lmao, how do i get it off?

[@DanielYuck]

HAHA That is both good and bad. I would recommend if after the tattoo is done and we still have purple stencil to get some bleach water, I am uncertain of exact ratios from bleach to water but the idea is we allow the skin to soak in bleach water for a few hours which would lift the stencil and remove it. I have not tried this myself as I typically match the needle size to the design at hand. I have heard several people mention this approach and I have heard a lot of them mention the success they've had by using bleach water to remove the stencil. If you try this may you please let me know if this works and what ratios you used on your end.

[@jamessolway3099]

Thank you for this video i was getting the shits last night i will be trying this when i get home from work ✌✌🤘🤘🤘 legend

[@DanielYuck]

You are very welcome! Should you have any questions at all please don't hesitate to drop a comment below and I will do my best to assist you in the best possible direction.

[@jbird7595]

great video man. im having an issue with doing fine line tattoos and not being able to remove the purple from my fake skin. doing 1203RL. i did find that wd40 will take off excess ink smears tho 🤣

[@ecko405theoriginal]

Thank you very helpful I’m a beginner Question will Gillette clear work ?

[@DanielYuck]

That is a great question! If it is the same deodorant I am thinking about I would say no. If it is the clear gel like deodorant I can not say for certain as I have not tried any clear forms of deodorants. It is a great question that I unfortunately can not answer for you but from my experience I have used speed stick with the standard transparent green deodorant glide and this has never let me down on fake skin.

[@santiagomolina446]

You are my teacher !😊

[@Itsthatoneguyfromflint]

So I use inkjet stencil ink and evidently it does not work. Do I have to have a thermal printer to do this? I use reelskin and nothing works to apply the stencil to skin. It really baffles me. I think it’s my stencil ink. Works beautifully on skin, but not practice silicone. Any answers for me?

[@PoppyC62]

Getting a stencil applied properly can make or break the tattoo, especially when it comes to practice skins. Thank you for showing and explaining your technique! 🙏 poppy #DanielYuck

[@cacoffeetravels3128]

What stencil paper are you using? To get the drawing so accurate and neat.

[@MarinaSamJa]

I don't think it's about stencil paper, he is probably using stencil printer, that's why it looks so clean...

[@DanielYuck]

That is a great question! I am using Spirit Stencil Paper and the TOEC Tattoo Thermal Printer. I also use my iPad with pro create bushes I made to create my designs which for me personally I prefer to design digitally over on paper. I will leave links below for you to check out on your end. Should you have any questions at all please don't hesitate to drop a comment below and I will do my best to assist you in the best possible direction. Spirit Stencil Paper 100 Sheets amzn.to/3w8awss TOEC Tattoo Printer amzn.to/3u0gBpL

[@donaldgulick3853]

Hell yeah man. Great technique. 👊

[@wahidnazari3678]

Hi Daniel from Germany. When we transfer the image to the client's skin, how long after that can we tattooed?. THANK YOU.

[@DanielYuck]

That is a great question! I like to say the longer you can allow the stencil to sit on human skin the better. The longer it sits in theory the harder it will be to wipe off along the way. I make sure to stay clear of using green soap along the way and use distilled water to clean the tattoo site until the stencil gets locked it with the outline.

[@wahidnazari3678]

@@DanielYuck Thanks.

[@applezauc3]

I screamed in my head on 6:58

[@DanielYuck]

I used to scream inside every time! I hated when I couldn't get the stencil right. It took me a GOOD while to find my flow. Whenever this happens on any skin whether it is fake or human skin it is always tragic to have to remove and try again. Over time the hits become easier and removing the stencil to try again is not as painful haha.

[@stephaniebultman1708]

Amazing- thank you!

[@DanielYuck]

You're welcome! Thank you for your support and feedback! Should you have any questions at all please don't hesitate to drop a comment below and I will do my best to assist you in the best possible direction.

[@mamawarrior]

What else can we use beside speed stick

[@MARKEVANS-vw9pc]

I also use a hair dryer to speed up the dry time

[@austinbird3677]

I needed this! Thank you

[@jamescharles9069]

clear video thanks so much!

[@04boostedboxer]

What brand stencil paper do you use? No matter what I do, I can’t get mine to transfer bold lines

[@SevasevoL]

Did you manage to find a good one?

[@richardrodriguez-lj1uf]

Hey Dan, i tried doing what you said in the video and my stencil isn’t staying on. I bought the same skin the only difference is that i use spirit stencil paper (color green) not sure if that matters, any thoughts on what might be the problem? Are you using a certain kind of stencil paper? Also i let it sit 24 hours in case you’re wondering. Anyway , i appreciate what you’re doing bro, your video do help a lot. Thanks

[@armanmatin2156]

having the same problem. Did you find a solution ?

[@armanmatin2156]

i realized it all depends on the type of speedstick. get the non powder blue version

[@DanielYuck]

These are great questions! I use spirit stencil paper in which I will leave links below. Spirit Stencil Paper amzn.to/3tV3CWg When you say the stencil is not staying on may you let me know what you mean? Would it be possible to show me an image? It is a bit hard to say as I would have to see the fake skin and results. I apologize for the delayed response as well.

[@DanielYuck]

@@armanmatin2156 This is a very true and great point! The speed I use is only for fake skin and it is indeed the non powdered form.

[@ripper9112]

@@armanmatin2156 You mean Ocean surf? Its not written anywhere if its powder or non-powder?

[@Tka200]

Thank you bro

[@fluke808state4]

Thanks...super helpful...

[@DanielYuck]

You're welcome bro! I appreciate you. Should you have any questions at all please don't hesitate to drop a comment below and I will do my best to assist you in the best possible direction.

[@Itsthatoneguyfromflint]

Could you make a video using inkjet stencil ink?

[@bboyglitch]

I do this and mine won’t stay AT ALL no matter HOW HARD I retract for the Ink. HOW do I fix this??

[@DanielYuck]

I apologize I’m not fully understanding. What issue specific are you facing upon placing down your stencil?

[@inkyard5314]

Use brut deodorant

[@gudda2x201]

How do you remove a stencil from real skin good enough to put a new stencil on with out seeing old one?

[@DanielYuck]

I would try using maybe bleach. I have heard that allowing them to sit in bleach water does remove the purple stencil. Have you been able to get it figured out on your end?

[@vidarobert9909]

Hi Daniel are you using a Stencil printer? Or do you redraw the pattern by hand?

[@DanielYuck]

This is another great question! I am using the TOEC stencil printer along with spirit stencil paper. I will leave links for you so you can check them out on your end. Spirit Stencil Paper 100 Sheets amzn.to/3w8awss TOEC Tattoo Printer amzn.to/3u0gBpL I also use my iPad to design my designs and I send the rendered image to the TOEC stencil printer.

[@vidarobert9909]

@@DanielYuck Thank you very much for your reply! Thanks for the link! Have a nice day!

[@donaldsteele6276]

​@Daniel Yuck I'm using a ATS886 tattoo printer and already had 2 bad stencil placements on the fake skin . Lol so I am ordering the same deodorant old spice didn't work very good .

[@cyruspiruz9422]

Great tutorial thanks

[@Ceecee384]

Is that Vaseline? And is that a fully dried stencil?

[@courtneyroberts4827]

Thank you for this video! I was getting so frustrated! 😂 I even tryed it on my hand and was like ok now why ain’t it sticking to my fake skin😂

[@UrFriendlyTattedGamerGirl]

Luv this!

[@DanielYuck]

Thank you for your kind feedback and support Lisa! I appreciate you. If you have any questions feel free to drop it in the comment section below and I will do my best to assist you in the best possible direction.

[@MythicYetiiiiii]

No matter what i do my stencil will not tranfer over... Its starting to get to me bc ive tried different ways for a week now... Maybe new paper or skin? Idk its getting aggravating because i wanna practice but cant

[@andrewb.lovesthelord5080]

Got my tattoo kit today and I didn't have much luck getting my stencil to even get on the fake skin what am I doing wrong? I used petroleum jelly so any help or suggestions would be appreciated

[@podaana4144]

do you have a thermal printer or you did it by hand?

[@DanielYuck]

That is another great question! I use a thermal printer called the TOEC. I will leave a link for you so you can check it out on your end. TOEC Tattoo Printer amzn.to/3u0gBpL Should you have any questions feel free to drop it in the comment section below and I will do my best to assist you in the best possible direction.

[@TattooDallas]

How do you do your stencils? Do you use a stencil printer? Or do you trace them yourself? I been tracing mine but I feel like they aren't coming out as well as they should. But I've also been way to eager to start and don't wait the full 2 hr minimum and I end up wiping away my stencils as I'm working. But I started doing a few stencils at night before I go to bed and let them sit over night and dry by my window so when I get up they're ready to go but I usually try to wait a little bit cause if I start first thing when I get them I don't want to stop and I'll spend all day tattooing and not getting anything else done.

[@Stinkydinkytrashcan]

Try dabbing instead of wiping too

[@kimboslice9724]

Crazy thing is I have this exact tat on my leg lol

[@DanielYuck]

Haha gotta love the online or pinterest designs. In all fairness there are some pretty rad designs on the web including this one.

[@arthuraleman605]

All of your tattoos that you do are they free hand artwork

[@mustafahassan7888]

Please can u tell me about fake skin which is best to keep the stencil doesn’t wash away cux im using the silicone one not good

[@xuan5469]

how do you take off the stencil afterwards?

[@DanielYuck]

May you elaborate for me? are you referring to the dark purple lines that remain after we have applied the tattoo?

[@xuan5469]

@@DanielYuck LOL, sorry I got to this so late. And I had to reference this video again!! Yes, i'm talking about the dark purple lines that remain.

[@cheyshafer507]

Question so if you see your tattoo coming through on the back side of the skin it's too deep ?

[@inkyard5314]

My stencil sticked permanently is there anyway to remove that

[@niceguyjames410]

How long did you leave it on the skin?

[@inkyard5314]

@@niceguyjames410 I think for 2hr

[@albertojaime7821]

Same problem here I have been trying diferen stuffs to remove it and anything works

[@DanielYuck]

Ahhh I think I am familiar with what you are talking about. If I am correct the stencil over sat and now the purple won't budge. For this we can approach it a couple of different ways. We can use a needle to be bolder over the existing stencil which may not be a desirable method. The 2nd would be to drop the skin into some bleach water for a few hours so the purple stencil can lift and wipe off. This is how I would approach it all. I did not see this comment until today and for that I apologize. Were you ever able to get the stencil off of your fake skin?

[@DanielYuck]

If I am correct the stencil over sat and now the purple won't budge. For this we can approach it a couple of different ways. We can use a needle to be bolder over the existing stencil which may not be a desirable method. The 2nd would be to drop the skin into some bleach water for a few hours so the purple stencil can lift and wipe off.

[@Sallycat726]

If we don’t have a speed stick what can we use instead?

[@hehehhehehe4014]

what do you use to make your stencils

[@stevevoid2223]

Any advice for deodorant roller, that is available in Germany/Switzerland?

[@MilDLesT]

So why doesnt vasinline work?

[@WS-tl6if]

Today is my first time tattooing I did the deodorant part wrong

[@franklinfocus]

Would this be bad on real skin because it’s meant to suppress your sweat? I think it would suppress your blood and plasma leaking out while you’re getting tattoos?

[@DanielYuck]

I apologize but I don't think I fully understand the question, please forgive me. May you please elaborate for me on what you mean?

[@barkbarkbarkwoofbark]

Hey yall!! So I recently bought some speedball linoleum slabs to practice on. I usually use regular false skin but I thought I’d try it. The issue is that I can’t get my stencil off, it’s completely stained after like two seconds. Any tips or is that one just done for

[@jadedgaming9515]

Does petroleum jelly not work to apply to either skin or silicone skin?

[@DanielYuck]

When you say apply, are you asking if we can use the petroleum jelly/vaseline to apply the tattoo stencils?

[@jadedgaming9515]

@@DanielYuck yep!

[@adreaunaduffie512]

Im trying to learn how to tattoo and I just ordered this same practice skin but I was wondering can I use Vaseline instead of the speed stick or what other things can you use to make the stencil stick

[@adreaunaduffie512]

does it have to be that specific type of deodorant or can it be any kind??

[@DanielYuck]

I don’t recommend using gasoline to apply the stencil. We need the stencil to stick to the fake skin, vasoline helps us remove the stencil while moistening the tattooed area. Furthermore I recommend for the silicone felt fake skins simple deodorant. Speed stick was cheap and works great. I’ve seen old school tattooist use speed stick to run their actual tattoo sessions but for me personally I use speed stick only for practice skins. Allow it to sit for some time prior to tattooing because it will wipe right off if we don’t allow it to sit & set.

[@DanielYuck]

That is a great question! I would not recommend vaseline because it will cause blurring and possibly remove the stencil all in general. I would recommend using the transparent version of speed stick which is typically a green/blueish color.

[@Newb118]

Can u use any deodorant? I spent hours drawing a stencil then after a few attempts with stencil solution the stencil was ruined

[@niceguyjames410]

What if I wanted to apply the tattoo to the silicone permanently? I'm hoping to use this for cosplay ideas I have.

[@baddabingbaddaboom6818]

if it’s just silicone and you don’t want to bother actually tattooing it (or don’t have the means to) i would just use permanent marker over the stencil and be careful that it dries properly

[@DanielYuck]

Hmmm That is definitely an interesting question! From my experience when I leave the stencil on the fake skin for over 24 hours the stencil will not budge and it will stay and bind onto the fake skin. So I would recommend the same as BaddaBing where I would use a marker something along the lines of a sharpie and go over the design with black.

[@DanielYuck]

Very cool recommendation BaddaBing! I appreciate your response.

[@travelinghearttattoos5482]

Great video ♥️ thank you

[@joeswampdawghenry]

Very good laddy

[@deansinfield9689]

Hey Daniel, I have a good question. I'm using a cannon gm 20 40 stencil printer suggested by you in your review. When I apply the stencil to a piece of reel skin using stencil stuff lotion, the paper keeps creasing when it gets moist causing the image to smear, or warp slightly. Can you fix this? Any tips please as I want to do some fake skin practice.

[@whitneyr3407]

Too much stencil transfer goo.

[@lemonking2641]

Does the kind of deodorant matter?

[@keepitlit9274]

yes

[@jaaishappy]

Can I use alcohol instead of stencil stuff with fake skin?

[@DanielYuck]

That is a great question! The answer would be no. Alcohol to my knowledge can not be used to apply stencils to any tattoo site whether it is fake skin or human skin. Alcohol will smear, blur and remove the entire stencil making it next to impossible to tattoo. For fake skin I like to used speed stick as it is inexpensive and for fake skin ONLY it works just fine. For human skin I always use stencil stuff.

[@Keron9God]

Do I NEED speed stick specifically??

[@otavyosilvashorts3754]

Thank you so much s2

[@DanielYuck]

You're welcome! I appreciate your time, feedback and support! Should you have any questions feel free to drop it in the comment section below and I will do my best to assist you in the best possible direction.

[@Amazinktattoo]

White speed stick won't work

[@adambartlomiejmiklaszewski1917]

Thank you

[@x4v13rdaartist]

I have a dove deodorant stick?🤔

[@Kolba_Team]

What drop system u use for syntetic skin?

[@DanielYuck]

I use the same drop system as I use on human skin. I used to use straight black but now I use the Dynamic greywash set for my shading, even when stippling.

[@MARKEVANS-vw9pc]

Speed stick works best why chance it.

[@ice2002]

what carbon paper brand are you using?

[@DanielYuck]

That is a great question! I am using spirit stencil paper for my stencils and I now use Tat2Skin inkjet printer for my stencils as well. I would recommend the spirit stencil paper for those whom are using a thermal printer and for those whom want to draw the stencils by hand.

[@ice2002]

@@DanielYuck Thanks for the response my carbon paper sucks 🤣!

[@kevinstuart6361]

I dont suppose you could share that image with me, would love to have a crack at that one

[@DanielYuck]

That question gives me a cool idea! What I am going to go ahead and create something that allows you to practice. I already know exactly how I can make something like this happen so bare with me and I will release more details on this soon.

[@kevinstuart6361]

Thanks Daniel, You my friend are a gent 👍

[@DanielYuck]

@@kevinstuart6361 haha you’re welcome Kevin! 🤝 I appreciate you tuning in. I will release a video elaborating more upon bringing this idea to life.