Applying Your Transfers With a Traditional Iron

[@steven_ryan]

- Cotton tee shirt (poly can melt) - Press and hold for 20 seconds (yes, it feels wrong and scary but it’s fine) - Peel and press again using the parchment paper to really work it into the fibers - I did mine on an ironing board (the metal kind with a pattern) and it worked great (I was nervous about that)

[@MsCjmaxi]

I didn't notice if you mentioned fabric being 100% cotton or a mix

[@MightyGunzTV]

Isn’t it better to iron or press the shirt first to flatten it evenly? You crimped a little over the O.

[@noisieboi]

😳 an Iron, that's impressive.

[@ninjatransfersDTF]

Our transfers work with a press, iron, or cricut 🙌

[@attaboy3462]

i followed these instructions but lettering wouldn’t stick just left glue from lettering

[@ninjatransfersDTF]

All our pressing instructions can be found here🔥➡ninjatransfers.com/pages/application-instructions-for-dtf-transfers-heat-sources

[@sweetbeep]

Are we supposed to do this on an ironing board?

[@ninjatransfersDTF]

you don't have to. A flat and even surface will work 🤗

[@sweetbeep]

@@ninjatransfersDTF like on a countertop with a blanket on top so the iron doesn't ruin the countertop?

[@CleetusMcBasketball]

What temp or iron setting is best to use?

[@ninjatransfersDTF]

All our pressing instructions can be found here 🔥➡ ninjatransfers.com/pages/application-instructions-for-dtf-transfers-heat-sources

[@mayumidealbabarrera2927]

Mine is not sticking to the shirt and I’ve tried 3 times would it be my iron that’s not hot enough?

[@ninjatransfersDTF]

We suggest pressing your transfer at 310°- 350°F with medium pressure for 15 seconds ⏱Temperature may vary based on material ♨Find more application instructions here 🔥➡ ninjatransfers.com/pages/application-instructions-for-dtf-transfers-heat-sources

[@DavidMoreno-by8hm]

They have terrible customer service. The orders are always late and I've had several orders delivered wrong.