APRILIA RSV 1000 Clutch Cover Gasket Diaphragm replacement

This is how I replaced the clutch gasket diaphragm
I'm not responsible for any damage that will occur to any bike trying to follow the same operations of this video
Music song title: High Octan
Composer: Benjamin Tissot (also known as Bensound)
Downloaded from: www.bensound.com/

[@andreacassani5858]

Thanks for the instructive video! Do you have to drain the oil prior to do this?

[@rinkia]

Hello, it's not necessary. Maybe a little leaking will occure, but few drops. Ma proprio un'inezia

[@jaymcfadden1803]

Hello there , saw you wipe the gasket/Diphrgram with somthing. Was that oil ?brake cleaner ?🤔🤓thnx in advance

[@rinkia]

Hello. It was a dry tissue. The diaphragm could incur in damages so i cleaned it for future inspections

[@Bruceyy_93]

I know it's an old video but what were the torques on the 8 M5 hex bolts holding the clutch cover on? Cheers

[@rinkia]

I gave a look to the manual. According to the specs ( 3.3.4) they are M6 bolts. Recommended torque 11 Nm. I will check asap if it's wrong

[@matthewvital9847]

I have the same bike. just wondering why you needed to replace your diaphragm?

[@rinkia]

There was a minor oil leaking and i thought a damage occurred. Finally i found some screws problems. Once opened i replaced thenpart. Unfortunately now i have the same problem from the oil filter carter.....

[@DonGH297]

No loctite on the nut?

[@rinkia]

@@DonGH297 hello, which one are you referring to?

[@DonGH297]

@@rinkia the nut that goes on the push rod, at the end (with the allen key in the middle)

[@rinkia]

@@DonGH297 from the Italian mechanical manual pag 3.4.4 Asta di disinnesto 1 - M12 - coppia serraggio ( torque) 30Nm. No loctite. You need loctite 648 for the main clutch shaft

[@migueramos9779]

Hola, que par de apriete le das a la tapa? un saludo.

[@rinkia]

according to my engine manual 11 Nm