Thank you again for these videos. They are very helpfully shot and your explanations are crisp and clear. My valve adjustment was yet another project that I was able to accomplish myself with your video as a guide. There is not a lot out there on these head-turning and fun-riding scooters, but I’m hanging onto mine as long as I can!
@Tank67754 жыл бұрын
Great to have you back Chief! Thank you so much for looking at scooter maintenance. I use one for my everyday ride and there is little information about doing these sorts of jobs. I am looking forward to watching the developments!
@CMKA6644 жыл бұрын
Finally new content, keep on going 👌
@kihestad4 жыл бұрын
Well done! I maintained a 50cc scooter (Piaggio Fly) for my daughter several years. It was a pain, even the smallest job takes forever because of plastic everywhere. You will enjoy getting back to fixing 'normal' bikes after this! 😊 I have just started posting videoes of my CB400 cafe racer project, feel free to take a look at my channel. Perhaps it can motivate you to get back to 'real bikes' 😛
@tahashukreaddhmani13494 жыл бұрын
thank you for all information, i am asking about my scooter same in the video, aprilia scarabeo 500i i saw last time oil in the air filter box, could you explain what i can do.
@chiefpepdesign4 жыл бұрын
If it is a little bit, that's ok. If it is a lot, it could be anything. To hard to tell without having the scooter here. Try to search on specific forums.
@gk76193 ай бұрын
Ich lade meine Motorradbatterie mit einem AEG-Ladegerät. Es gibt zwei Modi, einen für 6V 3,5A und den zweiten Modus für 12V und 7A. Ich habe zuerst den ersten Modus ausprobiert, aber er zeigte einen Fehler an und ließ sich nicht aufladen. Den zweiten Modus habe ich auf 12V und 7A eingestellt. Der Ladevorgang hat begonnen. Vorher habe ich etwas destilliertes Wasser hinzugefügt. Es hat ein wenig gefehlt. Es ist sehr heiß hier und wenn ich 30 Minuten im Stau stehe, überhitzt es. Meine Aprilia Scarabeo 500 2003 ist so gut wie neu. Wie aus der Fabrik. Ich kann den Lüfterschalter am Kühler nicht finden. Wo findet er Frostschutzmittel? Ich möchte das Einschalten des Lüfters erzwingen, um eine Überhitzung zu vermeiden. Was soll ich in dieser Situation tun?
@chiefpepdesign3 ай бұрын
@@gk7619 Du siehst in meinen Videos, wie ich den Kühler auffülle. Du meinst hoffentlich Kühlflüssigkeit statt Frostschutzmittel. Frostschutzmittel benutzt man nur im Winter. Diese Flüssigkeit kühlt viel schlechter als Kühlflüssigkeit. Wenn du deine Batterie mit destilliertem Wasser auffüllst und auflädst, ist es wichtig, dass du die Kappen der Batterie während des Ladens entfernst. Das Wasser muss verdunsten können (es wird auch während des Ladevorgangs blubbern). Ich hoffe, es klappt alles! (Den Lüfterschalter weiß ich leider nicht, wo der ist).
@jurisjansons57703 жыл бұрын
I have an Aprilia Scarabeo 500 in 2003. What are the valve clearances ? Waiting for reponse Thanks
@chiefpepdesign3 жыл бұрын
I don't know anymore. I just searched on the internet. Every Piaggio 500 engine from that era is the same. So you can also search on Beverly.
@mikehall60922 жыл бұрын
Where is he located I need him to do a full maintenance on my Aprilia Scarborough 500
@chiefpepdesign2 жыл бұрын
He is located in Holland. He is no dealer so he doesn't work on others bikes.
@mikehall60922 жыл бұрын
@@chiefpepdesign do you know anybody in the Saint Petersburg Florida area that fix on a apprilla Scarborough 500 scooters
@chiefpepdesign2 жыл бұрын
@@mikehall6092 Sorry no. I have only been once in the USA in my live. That was in New York and I didn't really watched out for motorcycle dealers. 😊
@davidspera85432 жыл бұрын
Scusa sai dirmi dove si trova l'antifurto imobilizer sullo scooter?
@carlosgooglemaps944 жыл бұрын
Good video Chief, but I still don’t like scooters, did I told you that? 🤣
@chiefpepdesign4 жыл бұрын
Yes you did. And I fully understand! 😅
@gs82823 жыл бұрын
Hi. How are you? I have scooter suzuki burgman 400cc. 2002. And I need sort my valves. I don't have service book. So how I can know valve clearance?
@gs82823 жыл бұрын
Plus I did this job before and now my scooter don't wanna start with 12w battery. I need start my car and start scooter with cables. So I did mistake with valves.
@chiefpepdesign3 жыл бұрын
Just buy a Haynes Workshop Manual. Well worth the money. Step by step how to reach the valves, all the clearances and very impartant, all the torque specifications. Otherwise how will you tighten your nuts and bolts back if your don't know the torque?!
@chiefpepdesign3 жыл бұрын
You can very well make several mistakes without a proper workshop manual. It's nearly impossible to do without. But not wanting to start on it's own battery power could indicate to a weak battery... Always charge it on the background while you're working on the bike. You disconnect it anyway right?
@gs82823 жыл бұрын
@@chiefpepdesign I bought new battery. But scooter starter don't have power to turn motor. Starter are new. Anyway I need download book for this scooter. Another quotation. If IN 0.08 so ex must be 0.16?
@gs82823 жыл бұрын
@@chiefpepdesign thanks for answer. I do one project. I have no experience about engine rebuild or fix. So I bought only tools for scooter valve. Some plate set