Aprilia SX 80cc Malossi MHR / SCR Corse Chrome HM / Summer Ride / 17,5 HP

Summer evening ride with the Aprilia SX80.
Setup:
Malossi MHR Replica 80cc (Cast iron)
SCR Corse Chrome HM 50/70
21mm Dellorto
Twin Air
The bike has been on the dyno and it makes 17,5 HP

[@GewoonJelleYT]

31:20 goed gedaan mann! 💯👌🏻

[@KWSigsgaard]

31:23 Nice too see you actually caring

[@saltman05]

Nice biceps my man

[@MrSamLar1]

Thnx hahaha

[@klapjanus123]

1 uur puur genieten.

[@Sa1nt_LT]

got my first bike aprilia sx with polini cp21, sport air filter and tecnigas enox. scared to drive it and stalled A LOT. Do you know how ot change from mph to kmh on digital speedometer?

[@kidsprotv5501]

Hi please, what pilot jet would you recomand for 21 PHB carburator and 80 cc Malossi

[@yureshtamana6845]

Goed gedaan 👍 top man love

[@kylianmeulen5487]

Die scr corse boven langs lopen en leuk met een wat langzamere 80cc goede keus. Leuk setupje niet al te snel maar wel vlot. Ben zelf nu bezig met 100cc 2fast project voor mn derbi 😁

[@MrSamLar1]

Dat is pas leuk spul 😋

[@kylianmeulen5487]

@@MrSamLar1 haha ja idd ben benieuwt hoe het loopt al het spul is dan ook langs DDL geweest in klaaswaal dus dan is het altijd top spul 🤣

[@Zjudoransj]

@@kylianmeulen5487 ik mag hopen dat je niet de weg afgeplukt wordt, zou zonde zijn als zo’n parel een wok krijgt..

[@kylianmeulen5487]

@@Zjudoransj ben bezig om hem over te zetten op motorkenteken. Dus geen zorgen 😉

[@MrSamLar1]

Laat ff weten als dat je gelukt is, zat er ook naar te kijken namelijk!

[@lame4884]

Lekker man!

[@rickysport156]

Ben van plan deze uitlaat te kopen, heb zelf een 50cc doppler ALU/21 mm carb. Is de uitlaat ook goed op een 50cc ?

[@MrSamLar1]

Ja zeker, loopt heerlijk op een 50cc

[@rickysport156]

@@MrSamLar1 Mooi, zou sws wat sneller moeten gaan dan me gianelli enduro die ik nu heb.

[@baulq8582]

How loud is that scr corse?

[@BUZZLIKER-2507-_-]

What crankshaft you put on the bike?

[@MrSamLar1]

Doppler Endurance

[@wr3671]

Hoor je veel geluidsverschil met scr corse en 50cc of dat je een scr corse hebt met 80cc?

[@MrSamLar1]

Yes is wel wat luider dan met een 50cc

[@nd27781]

Mooi spul

[@coenpaus1547]

Joo, is de scr corse 50/70 handmade onderlangs goed voor 80cc? En zou dir goed performen op malossi mhr team 80cc?

[@MrSamLar1]

Hij loopt er prima mee, maar je kan er met een 80cc uitlaat wel meer uithalen

[@coenpaus1547]

@@MrSamLar1oh oke dan wordt eht wss ook weer andere uitlaat

[@kenezkenyeres3542]

Why you don’t put 28mm carburator in the bike?

[@MrSamLar1]

Not needed, I tried fitting a 28mm, but with the SCR Corse exhaust it's hard to get it to fit right and awful when adjusting the fuel/air ratio.

[@carlosaranda6938]

Por que deberias poner el 28 y un escape 80 90 no un 50😂 de casa con un 17 y medio corre lo mismo

[@titok0612]

what is fuel consumption per 100 kilometers

[@MrSamLar1]

Really depends on how you drive. If you drive calmly, around 5L/100KM. If you drive like a hoonigan 10L/100KM or even worse. I would say on average it's 7L/100KM.

[@undergrounddrift187]

@@MrSamLar1 WHAT ?!

[@davidbaranyi7496]

would you tell me the type of small lamp up front?

[@arnodewitte8989]

Mijn fiets gaat niet zo hard

[@OnlySoloQueue]

lol

[@schetta]

top speed ? 115km/h?

[@MrSamLar1]

Yes around 100-110 km/h

[@r4ikos1c27]

@@MrSamLar1 Is this a converted Aprilia sx 50, from 50cc to 80?

[@DutchBlackDerbi]

@@r4ikos1c27 i think so

[@MrSamLar1]

@@r4ikos1c27 Yes bike was originally a Aprilia SX50 but the 50cc cilinder has been replaced for a 80cc one

[@Sa1nt_LT]

what gearing?

[@MrSamLar1]

14-53

[@byszuwar7894]

hey man just bought the malossi mhr replica 80cc and what is the top speed?

[@MrSamLar1]

It really depends on your gearing and rest of the setup. I got around 100 km/h with 14-53 gearing. But do mind this is not the optimal setup for this cilinder, you could get more with an 80cc exhaust and bigger carburator.

[@byszuwar7894]

@@MrSamLar1 oh yeah i have an 50-90cc gianneli exhaust and a big carbureator , sadly the reason i had to buy this was beacause the oil pump didint pump :(

[@MrSamLar1]

@@byszuwar7894 Ah that’s bad, but see it as an improvement. Anything above 50cc you’re better off with mixing the oil yourself. Those pumps are not reliable when they get older.

[@byszuwar7894]

@@MrSamLar1 yea only if i knew, and the oil pump isnt that old its got like 6 years, one plus of this whole things is that i finally get to have a new kit

[@jb-fz7be]

Is die uitlaat niet te afknijpend voor die setup?😅

[@MrSamLar1]

Valt mee, met een 80cc uitlaat valt er meer uit te halen uiteraard.

[@sj123wo9]

What are the handlebars?

[@peterfuszenecker4985]

How old is this bike? AM6 or d50b0

[@MrSamLar1]

It’s from 2007 so it has a Derbi D50B0 engine

[@marcusolsen3202]

Can you send a link to the cylinder can only find alu replica cylinders

[@chimpei3965]

What is your fuel consumption?

[@MrSamLar1]

Really depends on how you drive. If you drive calmly, around 1L/20KM. If you drive like a hoonigan 1L/10KM or even worse. I would say on average it's 1L/15KM.

[@chimpei3965]

@@MrSamLar1 appreciate it

[@alviskirsanovs5575]

Hey, do you have unlimited cdi?i insstald on mine moped 70cc cast iron no name and ir gous about 60km/h i dont know where is problem sprockets 13/53

[@MrSamLar1]

This type of CDI has no restriction from the factory. What kind of moped do you have?

[@alviskirsanovs5575]

@@MrSamLar1 Peugeot xps 2007 (enduro)

[@alviskirsanovs5575]

@@MrSamLar1 am6 minareli motor

[@MrSamLar1]

Have you adjusted the carb? Bigger sprocket?

[@alviskirsanovs5575]

@@MrSamLar1 I have 16mm carb running great and all sprockers is 13/53 i changed from 11/63

[@sjors24]

Originele krukas ?

[@MrSamLar1]

Nee zeker niet haha. Doppler Endurance krukas.

[@samjt5349]

Is een 80cc groter dan een normale 50cc

[@MrSamLar1]

Qua uiterlijk idd niet, maar boring en inhoud is zeker groter. De naam zegt het eigenlijk al ;)

[@PaulSmith-br4iq]

Hi what sort of speed does it do? What gearing? I'm fitting the same setup

[@MrSamLar1]

Gearing 14-53 and the top speed is around 100 km/h

[@djpalasidegameplay1679]

​@@MrSamLar1 hi i have question can i registered yz 125 or 250 in NL ???

[@seroy3715]

@@djpalasidegameplay1679 no, but you can register ktm exc 125 250 300 450 etc..

[@djpalasidegameplay1679]

@@seroy3715 im ask because im see in italy yz tm husqvarna motard and this moto is normal registered

[@seroy3715]

@@djpalasidegameplay1679 yea husqvarna is same as ktm but yz is not street legal and idk about tm

[@igor.k310]

what wheels you have?

[@MrSamLar1]

Derbi DRD 03 wheels with double brake disc at the front

[@igor.k310]

@@MrSamLar1 ty

[@igor.k310]

@@MrSamLar1 cant find it,is it possible for you to send me the link?

[@MrSamLar1]

It’s not possible to buy it new. You have to find it second hand, these rims only came on the Derbi DRD 2003 model.

[@davidbaranyi7496]

It’s a ktm exc 03-07 mudguard?

[@MrSamLar1]

Yes

[@aggelosgss6536]

Where did u bought this mask with out lights bro?

[@MrSamLar1]

I got it from 24MX, it’s for a KTM 250 SX 2007. But you can make it fit on any bike.

[@aggelosgss6536]

@@MrSamLar1 Ty broo

[@KWSigsgaard]

Is it a team or replica?

[@MrSamLar1]

Replica

[@xixplain5452]

what is the difference of the mhr replica. to the team?

[@KWSigsgaard]

@@xixplain5452 The replica is a replica of the original MHR Team. The MHR team is a hyper-racing cylinder that's only really used for track. And the Replica is almost a sport cylinder (semi-racing) that's mostly used for road and chill tuned bikes.

[@xixplain5452]

@@KWSigsgaard does the mhr team get more performance? I don't know which one to buy...

[@KWSigsgaard]

@@xixplain5452 They are 2 completely different cylinders. If you don't know ther difference already, i would look intop things a bit more, before buying everything. But the MHR team makes much more HP then a replica does.

[@jassson5769]

top speed?

[@MrSamLar1]

110 km/h

[@seroy3715]

are you using stoch crank? If not can you use?

[@MrSamLar1]

i"m using a Doppler crankshaft

[@seroy3715]

@@MrSamLar1 oh ok man. Can you use?

[@MrSamLar1]

With the stock crank?

[@seroy3715]

@@MrSamLar1 yeah

[@MrSamLar1]

I’d recommend getting a new one. The stock crank is not made for this kind of torque. If the crank has a low mileage, it’s possible to use, but will wear out quick. If the crank already has a lot of miles on it, it’s possible to blow the big end bearing to pieces.

[@alviskirsanovs5575]

what are your setup?

[@MrSamLar1]

Malossi MHR Replica 80cc Doppler crankshaft SCR Corse Chrome HM 50/70 21mm Dellorto Twin Air filter

[@alviskirsanovs5575]

@@MrSamLar1 i have peugeot full stock and max speed is about 50km/h my back wheel has 62 sprocket if I will instal 52 sprocket my top speed will increased?

[@MrSamLar1]

@@alviskirsanovs5575 Yes

[@KWSigsgaard]

@@MrSamLar1 I was really wondering if you had a stock crankshaft... because of the descrption i thought you where driving around with a stock crankshaft haha

[@harveyy2120]

@@KWSigsgaard if you did that the chances are it will blow up after a while of using the 80kit, they may cost a lot for a decent crankshaft but it saves a lot of money on the long run

[@DutchBlackDerbi]

Race cdi?

[@MrSamLar1]

Stock CDI

[@DutchBlackDerbi]

@@MrSamLar1 thx

[@IAmNomad]

Soesterberg

[@MrSamLar1]

Yes klopt haha