Aquarium model 7 - Testing Water Cool Chiller fish tank with Chip-Peltier-TEC 12710

[@ronaldbizlink1311]

instead of trying to cool such a huge space with such a mini fan, you could try attaching the peltier unit direct to a Watercooling Block for watercooled CPUs, in that way instead of air-cooling the SS pipes that you made, you are actually directly cooling the water by passing it through the CPU waterblock. Waterblock for CPUs/GPUs comes in a variety of sizes and are not particularly expensive. Hope that helps!

[@HieuNguyen-io8oe]

Anh ở đâu ạ em rất thích những video như thế này clip nào em cũng coi cả

[@pieceofpaper924]

Cảm ơn bạn nhiều nhé Mình ở NB

[@pakistani8707]

great i like honesty u can put ice even to show pass but u did not fool us

[@pieceofpaper924]

Thank you very much for encouraging me I just want to share with everyone about experiments Thank you very much Wish you a happy day my friend

[@tungnguyenanh5227]

bác người Việt Nam ạ, xem clip mà mê quá :D

[@pieceofpaper924]

Cảm ơn bạn nhiều nhé

[@minhat8276]

Piece of Paper bạn có thể cho xin link hoặc tên các bộ phận không ạ =]]

[@tranhung5124]

Hình như bác là người Việt nam

[@hackerman382]

đúng rồi nhìn là biết mà :))

[@mr.dizzzm7385]

it might not reach your target on 24°, but its definitely working cooling system with only using 1 peltier. appreciate 🙏 thx for the video.

[@poonamchoudhary5788]

Very nice video friend good 👍

[@zombieman9559]

Excellent video on DIY your own aquarium chillers

[@pieceofpaper924]

Thank you very much Wish you have a happy day My Friend

[@khanhha8132]

Like!.ông bạn giỏi quá.

[@pieceofpaper924]

Cảm ơn bạn nhiều nhá Ung hộ kênh giúp mình nhé

[@sunilnirwana2131]

Amazing Bro.Lots of hard work and application.Keep it up.

[@duonggamer3411]

Bác chơi sò tầm 4, thử 8 con xem phê không ^^

[@pieceofpaper924]

^^ Mình chỉ chế nghịch vậy thôi, chắc mấy nữa mình làm cái lốc tủ lạnh vs cục nóng điều hòa mà chưa có thời gian làm cảm ơn bạn nhiều nhé

[@duonggamer3411]

@@pieceofpaper924 sò thì tốn điện phết, bác thử chơi block tủ lạnh đi là ok

[@notaxforlove]

Great effort, sorry the test failed. But i dont think exact 24 degress is required. 25 is also good. You could try using increasing the metal pipes inside.

[@pieceofpaper924]

Thank you very much for encouraging me I just want to share with everyone the experiment Perhaps if we want to cool this way, we have to increase the amount of CHITEC Have a nice day My Friend

[@philipw7058]

I’m already exhausted 😴

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@SunilKumar-do3rs]

Don't give up Better luck for next time Make aquarium chiller better 😊😊😄😄

[@pieceofpaper924]

Thank you very much Have a nice day my friend

[@marionojavamuth5376]

Nice review and good work....dont forget bio ball needed for bacteri 👍👍👏👏

[@pieceofpaper924]

Thank you very much Have a nice day My FRIEND

[@krank5095]

New king of diy

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@416guppys9]

i think you are amazing great work

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@ayushmukherjee6621]

A great try... actually the peltiers are not efficient in pumping heat out of aquarium as itbis an open system...they work great for closed systems like the refrigerator...maybe you can show us how to make s chiller using a refrigerator compressor..this is a very well needed video topic but none has ever demonstrated this in KZbin. Please make one...thank yoy

[@pieceofpaper924]

Thank you very much for your good idea I also wanted to make a water chiller from a refrigerator but I couldn't find a suitable refrigerator I will try to implement it in the next Clip Thank you very much Wish you a happy day my friend

[@ayushmukherjee6621]

Yes sure buddy❤️.

[@silvestreribeiro1400]

I like your videos. I wanted to ask you to make more videos and projects on how to cool the peltier aquariums, since here where I live in the Amazon is hot and humid. I live in Porto Velho in the state of Rondônia, and I have difficulty keeping fish and plants in a non-tropical climate because of the temperature. I think Vietnam is hot too. Thanks for your videos. Hugs from your Brazilian friend.

[@volteface69]

Parfait et merci !!! 👍👍👍

[@pieceofpaper924]

Thank you very much @Guy Davriu It was a failed test Thank you very much for encouraging me Wish you and your family always have good luck in life

[@volteface69]

@@pieceofpaper924 merci beaucoup à vous aussi !!! 👏👏👏

[@musicbo239]

So nice bhai

[@pieceofpaper924]

Thank you very much Have a nice day My Frined

[@tareqtechnical546]

Interesting test

[@Mas_eddy19]

Keren lur vidiomu.. 👍🏿

[@blackbandit3330]

It was great idea

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@LeoConte80]

great job. you can try to do the chiller box smaller... the peltier need to cool all the air volume inside the box before cool the water, so was a lot of air there

[@pieceofpaper924]

Thank you very much for encouraging me I will try to do better Wish you a happy day my friend

[@MrPraveenGeorge]

23:41 When you consider the difference in water temperature after 8 hours, you also have to keep in mind that difference is influenced by change in ambient temperature, which has changed quite a bit due to change in heat radiation from sunlight.

[@pieceofpaper924]

Thank you very much I just want to test chip-peltier-tec performance and share it with everyone I realize that a chip-peltier-tec is not working if everyone wants to use it for their aquarium, it may have to use more than Chip. thank you very much Have a nice day

[@chhonhpc1]

W

[@aquariomarinho]

great video! like following the channel

[@pieceofpaper924]

Thank you very much Have a nice day My Friend I apologize for the slow reply because I am in the hospital

[@lookmanlookman5432]

Why you didnt use capiler tube brass?

[@see4web]

bro...that was so cool. you are very talented. can you make a customized chiller for me..i would love it.

[@pieceofpaper924]

Thank you very much Happy new year My Friend

[@see4web]

@@pieceofpaper924 Happy New Year.

[@ЕвгенийСтруков-у8л]

Dear friend, did you make an aquarium of fiberglass or plexiglass?

[@pieceofpaper924]

The aquarium I use in Clip is super clear glass It is not by Meka I apologize for the late reply Because I was at the hospital last time Wish you a happy day my friend

[@ЕвгенийСтруков-у8л]

Thanks for the answer. I wish you health and success.@@pieceofpaper924

[@nguyenthai3283]

keo trong clip là keo AB đúng không anh?

[@pieceofpaper924]

Đúng rồi bạn ạ

[@vagnerrocha2544]

Using aluminum pipes and removing pump inside chiller due to hot radiation of pump you will success.

[@pieceofpaper924]

Thank you very much for sharing your thoughts with me and everyone I will try to do better I originally wanted to use Aluminum but I could not find suitable aluminum so I had to use stainless steel instead. Aluminum conductors are much better Thank you very much Please share your good ideas with me Wish you a happy day my friend

[@amitkanojia674]

Sir can we make canister filter and chiller together...(inlet from aquarium will go to canister filter and outlet from canister filter to chiller inlet and then outlet from chiller to back in aquarium again) will I have to use 2 diffrent submersible pump with the same volt 800/L? And can we cut and extend the temperature sensor wire because I am planning to hide diy canister filter and chiller under the tank cabin

[@onlylagkillme5372]

nice bro good job!!!!!!

[@pieceofpaper924]

Thank you very much @panos darkan Have a nice day My fRIEND

[@chrisdee8957]

The pump is making heat so you shouldn't have it in the coil chamber box. More cooling for the peltier should improve its efficiency a little and some sort of thermal mass battery in the coil area to pre chill and help stabilise the coil temp.

[@pinzy2833]

linh kiện anh mua ở đâu thế ạ em cũng muốn làm vì hồ em nhiệt độ tận 30 độ chiller mua không có

[@pieceofpaper924]

Cái này mình làm thử nghiệm theo yêu cầu của mọi người thôi Mình có ghi trong video là thử nghiệm thất bại vì không làm lạnh được như ý muốn. nếu muốn làm lạnh triệt để thì bạn dùng bộ lốc của tủ lạnh nhé. hoặc rẻ thì làm thùng đá cùng cảm biến khống chế nhiệt độ như video khác của mình ấy. Dùng cũng được có điều không được đẹp mắt ^^ . Còn tốt nhất thì vẫn là Chiller

[@luizjr.8293]

Bro, the Peltier didn't cool the object, it removes the heat. You might get better results whether you improve the heat exchange. Your are using the air to exchange temperature, your "freezer" is working like this: The Peltier romoves the heat from the aluminum > the aluminum exchange temperature with the box's air > the cooled air exchange temperature with the pipes > than, the pipe exchange temperature with the water. This process has so much steps. I mean you would get better results make some changes. How about make the Peltier act directly with the water? Try it making the cool part or Peltier contact directly the water, maybe a aluminum pipe dissipation.

[@pieceofpaper924]

Thank you so much for contributing ideas to me and everyone Actually I just wanted to do a test of the performance of The Peltier. To answer everyone's questions And it did not work Thank you very much Have a nice day My Friend

[@luizjr.8293]

@@pieceofpaper924 :D Peltier is not so efficinet at all, the power consumptiom is high and it didn't cool the necessary. To get really cold temperatures i recommend using a refrigerator's engine. have a nice day too!

[@Salibs]

why did you use a fan on the cold side of the peltier?

[@pieceofpaper924]

I want the cold air to spread better and stir the air evenly in the refrigerator nice to meet you My Friend

[@Salibs]

@@pieceofpaper924 ive been trying to cool a 25litres of water down to below ambient temperature. what luck have you had so far?

[@rahamanmrk]

Your DIY is superb but getting the product is difficult .

[@pswanberg1]

that led strip light mixing rod

[@sl.reefer2689]

Can we use this tie retailer in a saltwater fish tank?

[@pieceofpaper924]

My friend This is just an experimental model requested by everyone That's not a good thing for professional use For saltwater aquariums and steady use you should use professional products for the best experience Have a nice day, my friend

[@MithinXavier]

Is this water radiator safe for fish? It can oxidise and become harm to fish right?

[@PrasadBania]

Awsome can u make one for me

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@ORIONPESMOD]

A có bán không ạ, e thấy a có chiller vs co2 không biết a có kinh doanh sản phẩm này ko ạ

[@pieceofpaper924]

Mình không bạn ạ Đây là mình làm thí nghiệm theo yêu cầu của mọi người thôi Nói thật mình thấy đồ chế không rẻ hơn mua đồ xịn mấy đâu mà dùng thì không lâu dài cũng như bất tiện :D

[@ORIONPESMOD]

Piece of Paper ok a ^^ thks a nhìu luôn ủng hộ kênh ạ

[@pedrosantos6005]

To be able to keep the temperature at 7C, increase the number of peltiers?

[@md.8058]

Brother make a aircondisonr using 6 peltier and use car raditior for heat dispatch

[@archelargawanon1213]

Can you teach me how to make that thing?

[@ΓεωργιοςΠαναγιωτου-ω3β]

1/2 frozen water bottle for better cooling in the aquarium .....

[@pieceofpaper924]

Well that's a good idea But if we use the temperature control circuit, we can control the temperature at the level we need This temperature control circuit is very cheap at about $ 1 I apologize for my late reply because I have been in the hospital for the past few days

[@kimkang3637]

can u provide link to buy stuff

[@pieceofpaper924]

This is just a demo version requested by everyone If you use it for a long time, you should use specialized equipment Me and you are not in the same country so I cannot provide you with a product link Do a search on your local sales websites or amazon

[@hrsupriyadi9942]

Sayang saya tidak punya tank 😀

[@mmalaibala2815]

Good job but u should correct some

[@alfonsoortega5294]

Could you give me the name of the topic that appears in the 12:14 minute

[@MucHuXao]

Có thể cho biết cách mua linh kiện và giá để hoàn thành máy này không bác

[@AQUAMAKER]

goooood😊

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@prasenjitsarkar2623]

Can you make this for me ??

[@RBS-yb8jv]

can you share over all the list of material !

[@pieceofpaper924]

Thank you very much I have specified the name of each material in Clip Thank you very much Wish you a happy day my friend

[@canvvuter5076]

How make a glue?

[@athos91]

Disculpe maestro... cómo se llama ese aparato que saca de la caja blanca dónde escribe 12 v??? Gracias

[@NaturesWhim]

genius!

[@pieceofpaper924]

Thank you very much Have a nice day My Friend

[@underwaterforest1714]

Nice try

[@arsyahrifai777]

U dont tell evry item.. for beginer.. realy hard to know that item name ?

[@pieceofpaper924]

I'm sorry but my english is not good I can't say in my video I am trying to learn English so I can speak in my video I wrote in writing in my video This is just an experiment and it fails I will try to do better Thank you very much Wish you a happy day my friend

[@arsyahrifai777]

Ya.. always try dude..never give up.. succes for u..

[@pieceofpaper924]

Thank you very much Wish you have a happy day My Friend

[@Dominikmj]

I guess it is super inefficient to have coils in a cold environment and expect that the water becomes much colder. There is also too much loss basically everywhere which the Peltier in this inefficient system cannot overcome. I guess if you use a traditional condenser (which has coils) and the (cold) coils are directly in the warmer water, you would have a far better system. Or.... you had already the more traditional water cooling chambers at the end of the video, which should definitely be far more efficient (as they are in direct contact with the chip - especially with heat paste. You could even put the "traditional heat exchanger" on the hot side and the water heat exchanger on the other...

[@prabashfarnando3315]

Goo

[@s.r.v154]

Which country do you live....??

[@s.r.v154]

@Vu Thanh Son India 🇮🇳 🇮🇳 🇮🇳🇮🇳🇮🇳

[@edevaldosantos8965]

yes you ninja

[@zeetwo6021]

bhai ak mera leya bana do ya ferr kaha se leya link de do

[@enelladodelbien3241]

donde compras el termostato?

[@bigdevil73]

pretty bad idea. Just for information - water conducts heat (cold) much better than air. The intermediate stage with cooled air container as a heat exchanger is a lot of energy loss. You should cool water directly with the radiator and the second circuit for the aquarium.

[@Ttblondey]

The fan so noisy

[@АлексейСеменюта-ж4к]

Do not teach canal guests to work with an angle grinder without a protective cover and gloves on their hands. And so sit and envy Your talent.

[@roolee2k]

the cost to buy all your equipment, i believe it's the same when you buy a real chiller

[@pieceofpaper924]

Thank you very much I just want to share the same experiments There are also many people wondering about this issue I just want to do experiments and share it with everyone It is not a substitute for specialized air conditioning

[@Civilsitis]

do you have any idea how much chiller cost?

[@roolee2k]

@@Civilsitis if you mean the high end chiller for salt water tank, yes it is way more expensive than his DIY built.

[@jrehgb3451]

wonderful but 100w

[@nithinprakash2299]

You just complicated this whole system...see other videoes about this peltier aquarium cooler.

[@servetumut2akbulut663]

Ben ne yaptığınızı anlamadim

[@pieceofpaper924]

I just tried to do a test at everyone's request And that test was not successful that is all Thank you very much Have a nice day My Friend

[@ВиталийИсаенко-и6г]

Why the hell make it so complicated

[@Synthematix]

Learn thermodynamics before attempting this again.

[@sakufernando7447]

Bad

[@abdulrashid7185]

pagal