AR type semi-auto Pardus SBX disassemble&assemble

How to disassemble and assemble AR TYPE shotgun. Model Pardus SBX (SD for USA). Share if you like and think useful for others.

[@gowah1]

When I received this The safety and take down lever were seized. I had to disassemble it first using Kroiol. The rear stock on the one I received was different and was one piece. It requires a very long Allen wrench ext. Recommend Lube those shafts with something. I'm a dealer a didn't want my customer to receive a non working safety

[@pardusarms]

For the import rules of USA the stocks on the guns during importation has to be fixed stock. ATF regulations do not let the gun have telescopic stock on the gun directly. Can only be changed after importation. Regarding the safety and take down latch. Sorry as they are metal to polymer match, in some can be tight which will smooth in time. On the safety latch, after taking the upper receiver apart there is a screw which you can loosen the safety latch. thanks for your comments here.

[@raulfiuza2296]

Very very good! thank you!

[@jamesdornan5118]

I have the SD model and have disassembled and cleaned etc all looks good but when firing I get one shot. The next round loads and I only get a click when pulling the trigger. If I unload and then put the clip back in and manually load I again get one shot. Is there something I can adjust fix that causes this?

[@kennywatson4909]

I can’t get the barrel out

[@charlesrobertson1632]

Does anyone know what size the Allen screw is to take the stock off?

[@rickcameron5506]

Would you know we're to buy magazines for this gun ? The website doesn't have a place to buy them .

[@pardusarms]

You can track thru the dealer you bought. If you are looking for 5 rds, that can be found if everyone is not out of stock. If you are looking for 10 rds magazines whch need separate importation than shotguns, there is not much yet there in USA.

[@rickcameron5506]

@@pardusarms thank you for the reply much appreciated. Do you know of any other universal or other makers of magazines that would work with these guns ?

[@charlesrobertson1632]

I got the SD model, I don't see any way to separate the lower, is this model a one piece model? Anyone know?

[@pardusarms]

As rules in USA. The butt stock to be one piece with lower

[@francisison4078]

does it have a choke sir?

[@muratayhan3752]

Not in standard models

[@g.mendoza7268]

how long is the barrel length of this shotgun sir?what is the maximum barrel length of an sbx semi auto shotgun?thank.you

[@pardusarms]

can be in different barrel lengths. generally 18" or 20"

[@g.mendoza7268]

just bought your pardus sbx20..its a 20" barrel..here in manila..

[@THECOMPANY2014]

@@g.mendoza7268Any feedback on the SBX?Planning to buy one early 2024. Thanks,