Arcade1up Bezel Graphic Installation

[@migs532]

To anyone who is installing the bezel, DO NOT install your bezel on the side of the old graphic like its being shown here. I did that and slowly and carefully pulled it back up to get rid of a bubble and it pulled up the old decal and did not stick back properly. Install the bezel on the front where its just plexie glass, this way you can pull it back up and reinstall with no worries.

[@mightycomicsandcollectibles]

Can you do one for the control deck? I need to see how that’s done

[@zerosignal316]

If my cabinet is already built would all I have to do to remove the panel is take out the control deck and remove the marquee?

[@tonyanthonyironman4352]

Ok what about the screws? Do we just puncture them thru? Also on the Mk Bezel there some Moves Printed on the center. How do we add those to the bezel once the center is cut out?

[@glovedcop69]

How do you take off the plexi cover?

[@xpectz]

Wouldn't the tack cloth leave a sticky residue on the plexiglass?

[@frankstrasser6108]

Can you guys do a tutorial on installing the control panel art? You have everything but that

[@tonyanthonyironman4352]

Thanks soo much for this video cause i just got the mortal Kombat Bezel today and i was clueless what to do with it. Also that was really helpful when you mentioned the Bezel can be place on the reverse side. Now i need to get a cutter knife and the tape.

[@bobmaslen2970]

Is it possible to remove the existing graphics on the arcade 1up so I can reuse for a bezel for a larger monitor that I put in mine?

[@haphzrd]

I wish I would have seen this before I applied mine. :-) You made it look easy.

[@barryjohnson5288]

Ever thought about making the center clear?

[@barryjohnson5288]

I have a quick question, i got a mortal kombat 2 marquee from you guys, and i was wondering if it came with the led light strip, and wires, or is it just the artwork?

[@Baron-co5wx]

Barry Johnson how long did it take to ship?

[@barryjohnson5288]

@@Baron-co5wx i ordered it on the 3rd, and they shipped it on the 10th.

[@tomburch4260]

There's not a bezel sticker on earth that's not full of air bubbles. I took my time and exactly as shown and mine is full of them. The adhesive is like gorilla glue and there's no way to work air bubbles out. Period.

[@califpv]

I'm looking for a mortal kombat 2 bezel for my arcade 1up cab. Do you have them available? Thx!

[@tonyanthonyironman4352]

They do arcadegraphix.com/product/arcade1up-mortal-kombat-2-move-list-bezel-2/

[@B_HarTz]

Here's a better bezel 💯

[@patrickbateman00]

You can easily get rid of air bubbles by poking them with a needle and hitting it with hairdryer. Then smooth them out with a plastic card.

[@AKTANEARCADE]

Oh no I think I made a mistake buying this... There's so many little bumps and bubbles on the vinyl on even this official video... I don't think I have a chance in hell of getting this right on my plexiglass. Ugh. Will just have to see what happens I guess.

[@nignaggin1219]

These screens seem to scratch so easily, even the ruler and applicator was leaving fine scratches all over.

[@elonce01]

Beautiful!

[@SnapCraft316]

Please sell completed projects! I'll buy one of each bezel to replace my kid-scratched ones!

[@tomburch4260]

It's printed on sheet vinyl dude, that would be impossible.