Arccaptain MIG 200 welder review

In this video, we review an entry level multi-process welding machine. The Arccaptain MIG 200 welding machine. In this review, we test out the Flux core-gasless MIG, Solid wire MIG, Stick welding, and TIG welding functions to review the capabilities of this machine. If you are interested in this machine, please check out their website: www.arccaptain.com/?ref=Freedom
Also see the attached link for Amazon.com to purchase the welder: us.arccaptain.com/freedomfabr...
Enter the discount code: "Freedom" at checkout to save an additional 5% on your purchase.
Thanks for watching!
#weld #welder #welding #shoplife #fabshop #fabrication #migwelding #tigwelding #stickwelding #arccaptain #smallbusiness #welderreview #freedom #weldshop

[@arccaptain-weld]

Thank you for your honest feedback. We highly value the opinions of professional welders like yourself, and it seems that your fans are equally skilled. Thanks all.

[@hanford_adventures]

Hey, I just bought one of the mig 200s after owning one of your guys' tig 200 for several months. You think you could do a converted page for volts and inches per minute with imperial thicknesses of metal as like a PDF we can print to tape inside the door? Like a conversion sheet of wire speed from metric to standard. 5m/m =275inches per minute for 10mm (3/8") as an example?

[@arccaptain-weld]

@@hanford_adventures Thank you for your suggestion. I will work on it promptly.

[@andrewrobinson2869]

Arccaptain any chance of being givern a welder down here in Australia. Would love to make a few video’s about them, I currently own just a gasless small mig that I can’t even change the earth to positive as it’s hard wired, Due to being on a Disability pension at 58yo there is no way I could ever afford such a great welder. I would Be very happy with a used one even, metalwork is my only hobbie I have, just starting to learn blacksmithing too, well I can only ask, thank-you for reading , yes or no I do love your welders and have seen so many great reviews. I hope 2024 is a great year for Arccaptain. God Bless

[@arccaptain-weld]

@@andrewrobinson2869 Wow Thank you for reaching out to us. Please try sending an mai1 to us. Thank you!

[@ivanbg5167]

Does Arccaptain have representatives in Europe?

[@yangthao4612]

Wow an actual factual proper review clear cut and an actual welder yeah lots of crappy reviews on KZbin but this guy knocked it out of the park

[@JohnWheels]

I have a similar inverter machine. It does the same thing where it cuts in and out on 6010, but if you use 6011, it runs perfectly fine like a regular 6010. 6010 and 6011 are nearly identical rods. Great review. I appreciate your honesty.

[@Freedomfabrication777]

Pretty weird. I’ve heard some inverter machines struggle with cellulose based rods, but 6011 is too, so that’s weird. 🤷🏻‍♂️ All I know is it definitely doesn’t like it. Thanks for watching!

[@JohnWheels]

@@Freedomfabrication777 I think the theory is this: 6010 is a DC only rod and 6011 is an AC/DC rod. With AC current, the circuit breaks momentarily at a rate 60Hz (60 times a second) which makes it hard to keep the arc lit. So, they put some extra chemical in the flux to help keep the arc lit on AC rods. Since the little cheap machine doesn't have a ton of umph, that extra chemical helps it stay lit even though you're running DC current. I could be wrong but maybe give it a try if you ever feel like it.

[@Freedomfabrication777]

@@JohnWheels I’ll give it a try. Sounds about right. Only one way to find out!

[@arccaptain-weld]

@@JohnWheels Great idea! Thank you for your suggestion.

[@offonefr]

the bud light strength gauge helps a lot 👍🏻

[@Freedomfabrication777]

I figured it helps if I “speak the Language”. Thanks for watching!

[@scottjune3554]

That was a great review I'm surprised you didn't mention the light inside the cabinet Really enjoyed the bloopers at the end. Again, great job

[@Freedomfabrication777]

I really should have, because that light inside the cabinet is honestly one of my favorite parts. Brilliant. Thanks for watching!

[@justaroundmidnight6207]

Thanks for the great review, it's the best one I've seen, and I hit the subscribe button. I bought the welder based on your review and the reviews on Amazon. I have 240 in my garage and wanted a more versatile welder and to learn TIG welding. I also purchased the TIG torch and will be using the rig for car restoration.

[@Freedomfabrication777]

Thank you, I appreciate that. I’m glad to hear that you liked it, and I’m glad to hear that you’re learning to TIG weld. The Arccaptain is very versatile. Thank you for subscribing and thanks for watching!

[@dlouque]

I got mine in yesterday, can’t wait to try it out.

[@Freedomfabrication777]

Congrats! Glad to hear it. Believe it or not, I’ve used it on like 4 jobs since I’ve had it, and it’s done really well. Let me know if there’s anything I can do to help. Thanks for watching!

[@user-ur4gn1mi9r]

Great video. Thank you!

[@Freedomfabrication777]

Thank you! And thanks for watching!

[@ls2005019227]

@6:15....."Pretty stiff spring; definitely not for you Bud Light drinkers"...... 😂😂🤣 Analogy understood!

[@jasonboyce6050]

6010 requires additional things to the circuit for it to run well, its very difficult for all welders unless the are specific for stick.

[@MarcMeyer-tw3ok]

Nice Demo!

[@Freedomfabrication777]

Thanks sir! And thanks for watching!

[@user-ur4gn1mi9r]

Very informative, thank you! I have a question. When you initially set up it looked like you went straight off the doors recommendation, but on mine they weren't even close. I initially ran mine with .030 on 120v and didn't have any trouble tripping the breaker, but I also feel like my settings were not taxing the machine at all when doing 10 gauge. I think my welds look pretty good all things considered, but being a beginner I'm wondering if my heat is way to low. What were your final settings were when doing flux core on the 10 gauge? Thanks!

[@MadGunner]

The ArcCaptain MIG 200 is a good value for starting out. YesWelder and PrimeWeld are too alternatives that each have a big following.

[@Freedomfabrication777]

I’ve been impressed so far. Thanks for watching!

[@MyLilMule]

Most of these inverter machines don't like cellulose stick electrodes like 6010. I have a PrimeWeld TIG 225 and a MIG 285 and they run great. I don't run a production or full time fab shop, but I know people who do and use these PrimeWelds. The electronics in them are actually superior to the transformer machines, although I would suspect the transformer machines will have a higher duty cycle and will probably last generations.

[@philipwalker1267]

Just picked one up have to get gas now. I’ve tried the stainless steel flux core it does awesome . Have to run 220 to my garage. I do a lot of stainless steel welding at work on kitchen equipment’s. I’m going to see how it runs on 208 volts as well. Having a small light weight welder vs a big one . Got the tig torch as well. Will be getting the spool gun soon to try on aluminum.

[@Freedomfabrication777]

Good deal! I’m excited for you! I’m also excited to hear your feedback on how you like it. To be honest, I’ve been using the heck out of mine. Thanks for watching!

[@philipwalker1267]

@@Freedomfabrication777 thank you sir I also got the yes welder panoramic welding helmet with the built in led head lights it works great as well I’m self taught on welding except for my brother he’s been helping me when he can

[@Freedomfabrication777]

@@philipwalker1267 very cool. Practice makes perfect!

[@yangthao4612]

For the price it’s better featured than harbor frieght units which costs like twice as much

[@Freedomfabrication777]

Completely agree

[@jubberdunnaville1912]

3​@@Freedomfabrication777

[@calebrodriguez3748]

Is that a ligt in the drive assembly area! I have never seen that but think thats super functional. Somwtimes i weld later into the evening under a covering with terrible lighting. Definitely like the way you scale the quality of products based on drink preferences! Subscribed. Looking forward to seeing more videos when i have time.

[@stevegunderson2392]

If you wired your 110 outlet with 10 gauge wire you can put a 30 amp breaker in the b-box.

[@damonr2233]

Have you tried doing any thicker material like 1/4 or 5/16 on MiG function?

[@Freedomfabrication777]

I have welded 1/4” with it on 220V and it did just fine. Thanks for watching!

[@damonr2233]

@@Freedomfabrication777thanks so much for the quick response. I’m getting ready to buy a new welder, and looking at this and the titanium.

[@mkearn724]

Most of the cheaper inverters won’t run 6010 bc the open circuit voltage isn’t high enough. Every time you whip it the voltage spikes and the machine will cut out. Seems like the higher end small inverters are the only ones that’ll run cellulose rods. I have a fronius transpocket 180 that runs them like a dream. For the price point it’s probably ok for an entry level hobby welder.

[@shawntraverse3762]

What is the max thickness of steel that this machine will do in mig?

[@davidgroskopf7898]

Mine is supposed to show up sometime today. Just wondering what the plug was looking like a 30amp?

[@Freedomfabrication777]

I’m sure you probably know by now, but it’s just a standard 30 amp 240v 3 prong plug. Like the one on a clothes dryer. Hope you like the machine! Thanks for watching!

[@Cummins-Mobile-Welding]

Weird how it didn’t like that 6010. I have a cheap yes welder 200 amp stick and tig welder, it also has a tough time with 6010 and 6011 Rods. Burns great with 3/32 7018 though. Must be something with the inverter style welders. Good videos man keep it up

[@Freedomfabrication777]

I have been told that inverter style welders don’t like 6010. I think it’s something to do with cellulose based/low hydrogen rods. Sounds like a common thing with those cheaper inverter machines. Thanks for watching!

[@johnsutter1497]

Have you ever used a millermatic 250x? Did you get good results? Thank you

[@Freedomfabrication777]

I have used a Millermatic 250x, and it performed just fine. It’s very similar to the Millermatic 252, but I believe it’s just a little bit older model. Thanks for watching!

[@BAT-man...]

Much appreciate the review! So in TIG mode, that middle cable coming out of the unit, is just sort of left dangling, as the ground plugs into the left and the TIG torch into the right slots?

[@Freedomfabrication777]

That is correct, that type of system where the Dinse style connector is just swapped depending on what process and polarity you’re running, is quite common nowadays. Thanks for watching!

[@BAT-man...]

@@Freedomfabrication777 yep, was just thinking if i should get a cap for it in case there is a chance it's got power going to it while it's swinging about.

[@Freedomfabrication777]

@@BAT-man... I don’t believe it’s necessary, the electricity is flowing the other direction. It’s the female connectors that will be hot. The pig tail with the male connector is just the cable that completes that circuit when hooked up.

[@BAT-man...]

@@Freedomfabrication777 makes sense, thanks for the explanation!

[@Freedomfabrication777]

@@BAT-man... No problem! I’ll answer any questions that I’m able to. Thanks for watching!

[@Htown82]

Hello sir,and what is the duty cycle?

[@rogertaylor8615]

If it's a mig 200 you can't use a foot pedal because it is a lift tig but you can use a spool gun for aluminum

[@neilheriot2361]

Boy oh boy, bud light just cant catch a break😂😂😂😂😂😂👍

[@Freedomfabrication777]

Lol. I don’t even drink, but there sure are some dandy jokes going around. I wondered how many comments I would get about that one. Lol.

[@JohnWheels]

😂

[@jasonvargas798]

I have to wonder why this multi process welder is under $500. Most good name brand machines are well over $1,000. What corners did they cut to come down to this price point.

[@Freedomfabrication777]

My honest opinion/answer to your question is that it is a Chinese welder. And as you know, things made in china are typically cheaper. I believe that is due to the fact that most parts are made locally(in china) and the overhead is not as much as a machine made in the US, where a large part of the components are made in other countries and have to be shipped in. I also don’t think you can expect Miller or Lincoln quality while still paying $500. Thanks for watching!

[@R.Stridstrom]

Western salaries probably add to the price too.

[@jimfeaster4837]

How many amps does it draw on 110 ?

[@Freedomfabrication777]

That’s a good question, I’ll have to throw my amp clamp on it while welding next time. I know that I have 20 amp circuits throughout my shop, and now that I have the settings dialed for lighter material, it hasn’t tripped. I’ll have to check it and put it in an upcoming video. Thanks for watching!

[@rogertaylor8615]

The 200p you can use a foot pedal because it is tig

[@yangben2130]

nice content，how can i buy the great machine

[@Freedomfabrication777]

Go to the link in the description. Enter “Freedom” at checkout for an extra 5% discount.

[@yangthao4612]

Specs sheet say on 120v MiG can max out at 160amps but mine only maxes out at 120amps 😢

[@Freedomfabrication777]

I’m sure it’s 160 amps with absolutely perfect conditions. I would say 120 amps is more realistic for a machine of that size. That’s about where mine maxes out on 120v as well.

[@yangthao4612]

@@Freedomfabrication777the setting doesn’t let me set higher than 120 in mug mode so it’s weird, maybe in some other mode it goes higher but I dunno I was able to set it to a max of 21-22 volts is that the equivalent of 160 amps ? 😅 I’m a noob

[@Freedomfabrication777]

@@yangthao4612 Ohhhhh!!!…..I’m pretty sure you’re just reading the screen wrong. 120 should be your IPM(inches per minute or wire speed or the metric equivalent) and then the 21-22 is your volts. When you MIG weld, your heat is adjusted in Voltage, not Amperage. Does that make sense?

[@yangthao4612]

@@Freedomfabrication777so when your in manual none sun mode it’s only the swore speed and voltage you can change and the amperage is still automatic? It’s kinda hard to understand this arc captain

[@Freedomfabrication777]

@@yangthao4612 correct, if you’re in MIG mode, it should only show volts and wire speed.

[@franciscoaalfaro3061]

Fronius cuando

[@corbinscarbrough9758]

Most my smaller machines don’t run 6010 even my 150 Miller s won’t run it gotta run 6011

[@Freedomfabrication777]

Yeah, I read it was something to do with 6010 not liking inverter machines.

[@rjd8434]

I ordered this machine a week ago and it was delivered yesterday. But the machine I received was different from the one that you reviewed. The cord on the welder is a 120 volt cord with an adapter that steps up to 240. I’m sure I don’t need to tell you how dangerous that could be for someone that isn’t as knowledgeable as someone like you. Especially a kid. My opinion they send out new and improved machines to influencers like yourself to sell their product and ship the old stock out to customers like me. Needless to say I didn’t even plug that thing in. It’s boxed up and headed back. Shame on Arc Captain 👎👎👎

[@Freedomfabrication777]

I’m sorry that you’re unhappy with the machine. Those are definitely valid concerns. Have you tried reaching out to their service department to ask them why the machine was different?

[@rjd8434]

@@Freedomfabrication777 Yeah I emailed them but of course they haven’t responded.

[@Freedomfabrication777]

@@rjd8434 please keep me posted, I’d like to know what they say when they respond.

[@rjd8434]

@@Freedomfabrication777 I wanted to update you on my issue with my Arccaptain. I got a reply from Arccaptain on a comment that I posted on a different video from yours. He stated that their machines do indeed come wired with a 240 volt cord and an adapter for 120 volts. He apologized for the inconvenience and stated that they would compensate me for the inconvenience. He wasn’t specific about what the compensation would be. Although he didn’t give me the option to exchange my machine for another. If he had I would have probably done it. His excuse for the mixup was that it must have been logistics 🤷🏻‍♂️ One other thing I noticed is on the machine I received the mode button said model 😂 I returned it and have moved on. As for the email I sent to their customer support it’s been a week and I haven’t received a response. Thanks for your concern.

[@Freedomfabrication777]

@@rjd8434 Interesting. I wonder why the issues with the typo on the display? I am perplexed by the mixup with the cord as well. So I guess you don’t know if they’re sending you a new machine? Or are you just getting your money back?