ARCCAPTAIN MIG 200 welder review part 2

[@amisakie]

Hands down this was probably the best real world review of a welder that I've seen. Great job. I hope you continue using it and give us updates as you go.

[@bombardier3qtrlbpsi]

For sure great job 👍

[@SJ-dn8dn]

Couldn't agree more! I wish all videos were this detail oriented with the information that matters.

[@allenoliver1907]

I agree great review.

[@rogertaylor8615]

It's been a great review I'm going to get one of these machine seen lots of reviews and always been great but you have done the most in depth and kept on going

[@Maplesyrup25-fw4qm]

Best most comprehensive no bull s… on the internet. Thank you !

[@arccaptain-weld]

Thank you for taking so much time to thoroughly review our Arccaptain MIG200 machine. We appreciate your dedication in providing an in-depth analysis and sharing your insights with your audience. Your feedback is invaluable to us as a brand. We're thrilled to see that you found the Arccaptain MIG200 to be a worthy product for review. We have taken note of your observations and will consider them for further improvements. Our team has put significant effort into developing the MIG200, and we're delighted to receive positive feedback from knowledgeable influencers like yourself. If you or your audience have any additional questions or need further information about the MIG200 or any of our products, please don't hesitate to reach out to us. We value your expertise and look forward to any future collaborations. Once again, thank you for your time and dedication in reviewing the Arccaptain MIG200.

[@NBSWELDING]

I enjoyed the opportunity and I'm thankful for the chance I was given to put this MIG 200 to work and see what it could do...I commented the team at ARCCAPTAIN for the design and construction of a great little welding unit. Please keep me posted on the use of the NBS WELDING promo code as I will be very curious as to how many viewers decide to buy a MIG 200...if there is anything else I can do for ARCCAPTAIN or the viewers that may help to get work done I'd certainly do my best to be of assistance. Thanks again to ARCCAPTAIN and the viewers Now go weld something!!!

[@mickeyj4228]

Great real-world review! This looks very comparable to my Everlast iMIG 200 at 1/3 of the cost. Amazing!

[@scollins44]

Your machine passed what I'd call a torture test and compatible parts we can pick up at Harbor Freight is a no brainer. I'm ordering one next payday. Congrats on making a good machine

[@bryanrios146]

Hey curious to see what type of generators could go great with this welder . I'm seriously buying this. And see how high of a wattage I would need to look into

[@ivanlopez5897]

This is not a review, this is a real life welder working a regular day, something 99% of us regular welders wannabes will ever do in a week 😂 great job nbswelding you are the man!

[@blueweld75]

You crushed it with your review dude. Real work and some torture tests. Along with how a hobbyist welder and or farmer would or could do things.

[@michaeldurling793]

Frankly that is the most objective unbiased review of a product I have seen on the Tube. Drive er till she drops and she didn't. The unit has some nice additional features and versatility that most entry level machines leave out.👍👍👍

[@billjue1753]

Wow, I just purchased this machine 30min before watching your video. With your proving the compatiblity with other brand parts it is a real bargain already. Thanks for a great review.

[@madisonh1000]

Just got me one today. Still hooking it up to try some aluminum. Excellent video.

[@dandahermitseals5582]

I'm 80 and been welding since my uncle's smitshop when I was 9 and my welds are all over the world so some think I'm qualified to question . My weldsare all over the world and I can't believe you got the penetration on that size material on that tiney machine. In the world of electricity the power isn't about voltage. The power is amps. Big needs huge amps and the offshore drilling platforms were so big we looked like ants on them.. I can't remember ever seeing anyone give a review so much attention . I just ordered their 50 + amp plasma torch today and will probably buy the stick Tig modle cause I like matching rigs. thanks for your effort. I subbed Dandahermit

[@NBSWELDING]

Good to hear from you. Thanks for watching and commenting also.

[@rickykey1175]

I have to have that welder i have been welding for a very very long time never seen anything like it thank you so much for your time very professional

[@MadGunner]

When running longer stick-out (long-arc), higher electrical output is required versus very close-in short arc. Running the electrical extension cord a long distance can also affect operation due to voltage drop, which may cause the welder to pull more electricity on the longer cord versus a short cord. I suspect this is why the ArcCaptain was acting oddly on 120VAC with flux core at a greater distance, and then showed improved performance when running on 240VAC. Really love these videos! I'm a huge fan of NBS! Each day a new video is posted, it's like Christmas! Hopefully more vendors will reach out for additional no-nonsense, real-world use cases instead of the typical KZbin reviews. I'd love to see YesWelder, Everlast and others provide this channel with some of their welder-cutter products and multi-process models that should stack up nicely in comparison to the ArcCaptain and HF models. Always good to see more PrimeWeld, too! These new upstarts are good options for those that can't afford the higher cost Miller, Lincoln, ESAB, etc.

[@ldtenenoff]

Surly hope they give ya some cash and or mega supplies both fer ur time and electricty once again u by far r the best at real world practical welding service and design as u go iv ever seen so thanks again man u rock this little jewel u have helped them immensly hope u get compensated!!! lookin forward to ur next vid. U sound like ur feelin alot btr and thats cool too peace my freind

[@bobmoore5242]

Easily the best welder review I've seen yet. Great that you include the deal with Arc Captain, because in the next few months when my bucks come in to land, I'm ready to buy one.

[@NBSWELDING]

Glad it was helpful!

[@haze1995]

Just bought one! I'm in welding school and hope I can keep practicing while out of class.

[@NBSWELDING]

Right on!

[@Catch_The_Irishman]

What a fantastic review. Always from the approach of what a hobby/farm/backyard mechanic would deal with and is resourced with. Of course your talent does not come with the welder but watching your videos will get us amateurs a little closer. Thanks man! I just subscribed! Approaching the review from the perspective of the target user is rarely done in these reviews. I bought the Arccaptain 160 MMA/Tig and the 50 Plasma cutter for $300.00 and you can't beat that deal for a regular guy!

[@Junebug60]

I know this vid is old but for everyone out there the mig gun connector to this machine is known as a "euro" style connector. Some folks convert there migs over to this type connection as the sockets to mount into your machine are readily available. Great review of the ArcCaptain.

[@NBSWELDING]

👍

[@nlgetty]

The best independent review I've seen for any product, let alone a welder...period. I have been looking to buy a welding machine for a while now but could not justify paying the price for most of the machines out on the market today. After seeing this, I am making the purchase now.

[@messybench]

You did a great review. I'm only adding a comment because I hear it helps your videos get scene. I've never run big rods like that. It was fun to see you go at it.

[@sergio.i]

Thank you for this review. Exact after your review I've ordered this machine - it will be my first ever welding experience. Sorry I haven't use your code because was buying in germany from dealer. Anyway, thank you, you just sold it to me!

[@jackwebb5917]

I know it’s been said already, but I have to say this is BY FAR the most “real life” review I’ve ever watched! Your welding skills are incredible and out of this world! The fact that you showed realistic scenarios that most of us DIY folks would experience was what made this video so special. I just pulled the trigger and ordered a Mig 200!

[@NBSWELDING]

Glad it was helpful, hope you enjoy your new welder 🙂

[@mmuklewicz14]

Your reviews were very helpful in my decision to buy this machine. I thank you sir yes you've been more than fair with your time. I'm just starting out doing repairs and custom fabs and don't have a ton of money to throw at a welding machine. I did go to school though so I'm already familiar with all the main processes so this machine was just the perfect thing to get me going. I thank you NBS and I thank Arc Captain. They've clearly got some knowledgeable people over there who really care about making a quality machine and not bending people over to gain access to quality stuff. I forgot to use the code, but I through you a sub because damn man you earned it.

[@htmotorworks799]

I just bought one of these and got it yesterday. A couple of changes they have made which I like. 1. Primary power plug is now 220, with the converter down to 110V. 2. Units on the display are now in 'Merican'! This thing is a cheap little powerhouse.

[@NBSWELDING]

Glad to hear they changed the display that's cool

[@bombardier3qtrlbpsi]

I nominate you salesman for the month😅😅

[@tjskibitcky5801]

I trust this review. It was thorough, it showed flaws in real world scenarios, and i believe what you said about it. I placed the order for mine today using your link. I forgot to put the promo code but i hope you still get credit for the sale because i wouldnt have bought it without this video.

[@danmcginley1495]

Also, thanks for the super review. I just bought the same welder, haven't used it yet, but your knowledge and techniques are much appreciated..

[@Tech-di7yd]

I watch a lot of KZbin, this is my favorite channel.

[@ktate2002]

I haven’t found a better review of this machine. Many thanks to you for your time.

[@NBSWELDING]

Thanks for watching and commenting 👍

[@TheCraneman66]

Honest ....Thank you. Just bought Arc 200. Like butter for a garage mechanic working off a 69.99 dollar twenty year old H.F. buzzbox.

[@M70ACARRY]

I got the ARC 200, as well. Best $105 I've spent in a long time.

[@petermccuskey1832]

Really nice looking weld with the Hobart wire. You are like me, your mind never stops figuring equipment uses and combinations.

[@nrxhavoc]

I just bought one of these thanks to you NBS. Seems like a great solid rig!

[@stephens340]

Best real review on any welding machine I have ever seen .

[@NBSWELDING]

Thanks 👍 CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzbin.info/www/bejne/nHvFfp2bqdGnisUsi=i_PTXBeUL5IewtcM

[@bartfart2123]

fantastic review! you will really help out the welding newbies and home hobbyists

[@francodeiuliis1562]

Thank you for doing this review VERY well done that machine is definitely a little beast and does a lot more then my Miller thunder bolt for less $$$ Once again thank you 🙏 Cheers from Nova Scotia

[@AWDJRforYouTube]

When short on amps for that 3/16 E7014 with that lil welder you can run it DC- [electrode negative] makes more arc heat at the rod runs hotter.

[@wadeprunty]

I'm glad I found your videos. I just got this welder delivered yesterday, it's my first welder. Glad to know I can repair my semi trailers with it! 🤣 But for real, I'm a new tractor owner, and I've quickly learned that it would be better for me to be able to do some of my own repairs and modifications. I think this welder will be perfect for me to do that, and to learn on.

[@duanew3324]

This was thee best video to test the ARC captain welder that I've seen. What a great job. Arccaptain should be very pleased. Excellent video!!!

[@NBSWELDING]

Wow, thanks!

[@RaysLaughsAndLyrics]

Thanks for taking your time and resources to bring us an honest, straightforward and thorough review. Allthe best in good health, prosperity and long life to you and yours.👍

[@RaysLaughsAndLyrics]

BTW.. SUBSCRIBED to UR channel👍

[@davidskipperskip5403]

Excellent that is a good machine. You put it through the ringer,

[@chucklesmakmlgh]

Great job. Sold me on welder. Plain N Simple

[@peetky8645]

the 030 problem was likely due to the extension cord causing voltage drop to the supply side of the inverter. a long stickout increased circuit resistance too much for the machine to push against.

[@TDJsteroids2011]

You did a SPECTACULAR JOB!!!!! I GREATLY APPRECIATE YOUR TIME AND THOROUGH THOUGHT AND EFFORT PUT INTO THIS!!! You have earned my respect and subscription. Well done!

[@NBSWELDING]

Wow, thank you!

[@techninefan90]

these two videos were awesome. i would have really liked to see it run gas flux core. thank you for the videos!

[@softwarephil1709]

Thanks!

[@NBSWELDING]

Thank you

[@bryanthornton6787]

If I hadn't already bought an Everlast Powerarc a couple of months ago, I would be using that promo code and ordering this machine. It will, without a doubt do anything I'd need doing. I think they should get it to run a 6010 for icing on the cake.

[@hillustration]

I really appreciate you taking the time to do this. Ive been looking at that welder and this was really helpful.

[@NBSWELDING]

For ARCCAPTAIN products use this link www.arccaptain.com/?ref=NBSWELDING Remember to enter promo code NBSWELDING5% to get 5% off and a free gift

[@elchampeon8772]

These damm chinesse machine are something else. They pretty much do the job and they are feather weights. I brought amico multi machine back in 2017 and man that thing is still going nothing but good news about those machine from this welder/ fabricator.

[@williamthomas9463]

You mentioned the possibility of being able to run .045 gas shielded flux core. I have the Lincoln Power Mig 210MP and I run .045 Lincoln Ultra-Core 71A-85 gas shielded flux core with it all the time. It runs it great with voltage to spare! Only problem is, if you’re working on something where you can run 18” long welds or multiple 6” long stitch welds in succession (think about replacing a cutting edge), it gets hot and will kick the thermal overload protection switch. Just let it rest a couple minutes and it goes right back to work. What’s really handy is, since it’s an inverter, if you’re on a bigger job with lots of welding and you’re working with someone who can weld; I’ve run my suitcase AND my 210MP, both with the .045 Ultra-Core 71A-85, simultaneously off my Lincoln 305G engine drives. Pretty handy when the situation presents itself.

[@NBSWELDING]

I've heard that the 210MP shuts off like that...my Buddy was just talking about that yesterday...he's had it happen on long welds with solid wire MIG.

[@messybench]

My Lincoln tig older transformer used to draw 50 amps from the outlet and would shut down on longer welds, like making aluminum trailer doors. I put a bigger vent opening and fan on it, and it seems to have made all the difference.

[@JALA578]

A few things. I believe the ... Setting is for pulse welding I could be wrong and the contrary its not speeding up for you to feed the welder it has a slow start function thats on a timer so you don't have stuttery starts.

[@NBSWELDING]

Okay thanks for that Appreciate your watching and commenting

[@peetky8645]

larger stinger and ground cables might increase performance and decrease stress on the inverter.

[@gordjohnson70]

Aluminum wire is sticky and will gum up your mig gun liner pretty quick. Yes, it works, but I suggest that you keep spare liners around.

[@ls2005019227]

Absolutely excellent review! I've got a Miller Syncrowave 210 multiprocess that I mostly use; but have wanted another welder just for my 13 & 14yo boys to practice with. I've never heard of ArcCaptain until now, but am very impressed. One request if possible: While I have a primarily "hobbyist" type shop, I also use my Syncrowave on stick mode at 150 amps (max) to arc gouge using 3/16" carbons (which works surprisingly well). I realize that many will think that 300-500A is required to gouge.....but any chance that you could do some gouging with that machine & 1/8" or 3/16" carbons? Having a portable machine that I could gouge with is another reason that I've been considering another welder. Thanks again!

[@NBSWELDING]

I never buy carbons smaller than 5/16" and my current workload will prevent me from putting any more time into testing that right now but I gotta say that if I was able to run 3/16" E7014 rods one after another like I did then I doubt there would be any issue at all gouging with 1/8" carbons...actually I'd say those 3/16" would be more work on a machine than 1/8" carbons Thanks for watching and commenting...sorry I can't post any vids of gouging right now but will keep that in mind if the chance comes up!

[@scottjune3554]

That was a great review I'm tempted to buy one and I don't need it

[@davidskipperskip5403]

Yes we think outside the box!!!!

[@dustpan2000]

I love the work ethic. I'm gonna make this thing work for me, and if it does good I'll do some work for it!

[@NBSWELDING]

Don't forget to subscribe to my channel and hit the notifications bell for more videos and reviews

[@mmuklewicz14]

Super helpful to know that the chicago electric contact tips and flux core shield work I will be picking those up immediately. Please Arc Captain do not change the contact tip thread to prevent this as that was my biggest concern with this machine was how easily can I get parts for it.

[@NBSWELDING]

Parts also easily ordered from the ARCCAPTAIN site...they have gas cups, contact tips, even can order an extra gun if you want

[@hollidaywoodcrafts7555]

thank you for your 2 videos of this welder.

[@NBSWELDING]

You bet

[@bryanrios146]

Ima tell ya man seriously one of the best reviews . Been scoping for a welder under 500 . For the house ... and at first i was a little iffy but u really convinced me to get this machine .. would like to see how good it can run with a Generator.. see what type and size Generator it can run properly at 220 .

[@NBSWELDING]

I run my ARCCAPTAIN MIG 200 off of my Miller Trailblazer 302 engine drive welder on 220V and it has always worked great.

[@bryanrios146]

@NBSWELDING that's awesome my friend. . Wish I had something like thst . I'm looking at a bunch of the generators in harbor freight and Lowes or home depot

[@bombardier3qtrlbpsi]

7014 rod.. i call it farmers rod..😅 easy to weld especially for first time welding

[@randallcarver6950]

Wow what a great review. Thanks a bunch

[@danmcginley1495]

120 Volt mode with 100 ft. of cord. The reason the breaker trips is the cord at that length has too much resistance. I'll bet a 75 ft cord would help with the resistance problem and breaker trip. Whenever you can use a shorter cord, do it. Other than that, the welder seems to be great!

[@nrpforty]

I can see you teaching welding to kids good job !

[@johnburens3395]

That was a pretty thorough review of a multi process welder for less than $500 dollars. Would have been nice to see some TIG with it if it can do it. I would by this unit!!

[@NBSWELDING]

It does TIG but I don't have much use for DC TIG...dunno what I'd use it for...I can MIG anything that can be done with DC TIG but to me the MIG is much faster and easier. I AC TIG aluminum with the ARCCAPTAIN TIG 200P....its the best TIG I've ever used for aluminum

[@angelaprater2679]

Super display of a 110v welder on how and why super job

[@johnfine491]

Thank you for such a great review video. I own the Titanium Multiprocess unit you talk about and it has been a very good unit for me (DIY'r, mostly MIG). However, I don't know if it is "double the price of the Arc Captain good!" ;) Once again, thanks for the in depth, real world review and all of your videos. I learn something from all of them.

[@victorreppeto7050]

Thank you for taking the time to throw that welder at a brick wall. It bounced nicely. I appreciate your review. There was another video I just watched that had a tip feature and I left $2. Can you reverse the polarity when mid welding?

[@NBSWELDING]

I think the only way you can reverse polarity on it is to disconnect and swap the cables

[@LanceDixon-w4r]

Great job! Love the torture test!

[@dandahermitseals5582]

Do you thing the flux core was as good as 7018?? I kinda feel like the 7018 would excell. You exceeded its 6o% duty cycle. Probably threw the breaker.. Aye?? Dandahermit

[@NBSWELDING]

As good in what way?...The flux core verses 7018 question could take big discussion if all the points were looked at. Most novice welders find it easier to learn to run flux core and especially easier to run uphill than 7018....flux core is very versatile from thin to thick material...7018 is more elastic and does better to purify and fuse dissimilar metals...far less occasions of crater cracking with 7018...lots of things can be considered.

[@peetky8645]

good review, if my titanium 185 dies, i will get this machine.

[@mennowiebe78]

Great job on the review and not taking it easy on this tning. Worked it hard and ut helded up

[@NBSWELDING]

Yep

[@bayoutrapper]

Best real world reveiw of arcaptain I've saw yet. I'd like to see one run 1/8" 6010, and 7018.

[@NBSWELDING]

I have videos where I do that...links below kzbin.info/www/bejne/fHe3nYmNmL6YnMUsi=qhncHwBOtO2IKQrT kzbin.info/www/bejne/rWG3n5KvbrKefcksi=B7gm7bNR_UCwHuNf

[@NBSWELDING]

kzbin.info/www/bejne/rWG3n5KvbrKefcksi=B7gm7bNR_UCwHuNf

[@diverbob8]

FYI...1 meter = 39.37 inches. You mentioned .068 so dividing by .039, you would have 1.75 M/Min. THANK YOU so much for your great incite about this machine. I'm 100% a hobbist and I bought the whole system, spool gun and all for less than $500.

[@NBSWELDING]

👍

[@HelleMarkussen-nj7ey]

Great video. Thanks. I wonder if it is possible to change the brass tip to a threaded tip instead of the spring coiled that it comes with. It’s near to impossible to get a flux head (the black one) that you have at 26:00. Have you tried that, please

[@HelleMarkussen-nj7ey]

I am in Denmark;)

[@NBSWELDING]

I haven't tried to change anything...the black tip came from Harbor Freight...any of these parts should be easily obtained...if not locally in stores you should be able to order online

[@HelleMarkussen-nj7ey]

Getting stuff from USA is a nightmare. Lots of taxes ;) if you ever try to change the tip to one with threads I will be watching. I can easily get the black tips with thread in Denmark. Thanks for a proper review of the machine

[@jheissjr]

Great review. Can you open the cover and show around inside in future reviews?

[@NBSWELDING]

It’s been done…another reviewer actually took the machine apart and inspected how it was built kzbin.info/www/bejne/lXrPlKieYs6NmLM

[@Blackopsmechanic338]

Good for the weekend warrior, but you’re not going to build a ship. Great review. Peace 🇺🇸🇺🇸

[@mishapesic9323]

Great review!! Best review I have seen in a long time for sure.

[@NBSWELDING]

Glad you liked it!

[@ericjohnson9080]

Great review. I found you thru Fitzee fab. Do you know if this machine internaly reverses polarity when going to flux and aluminum modes?

[@NBSWELDING]

You change polarity by opening the cabinet door and swapping the cables...it's not done automatically but it's easy to do

[@kenmen4493]

For the review!. After watching your video I did decide to purchase one of these little welders. However I tried your pro code several times in the website would not take it. I ended up purchasing and paying full price which is not an issue but I would’ve liked for you to get to Credit since you’ve done with the best reviews of this machine that I have seen so far.

[@NBSWELDING]

Thank you...I'll ask Luke what's going on with the promo code

[@NBSWELDING]

Luke says the promo code is still active but coupons cannot be stacked...so if there was a Fathers Day promotion or something else applied then it can't include another discount. Thanks for watching and commenting...I'd like to hear from anyone that decides to buy and find out how they are treated.

[@dayslife]

Great review and follow up !!!! thank you.

[@andrewrobinson2869]

I want one . They seem perfect . I ami in Australia however, do they deliver . I would love to try one as we only have 240 volts.

[@NBSWELDING]

Your closer to them than I am and they shipped me one in less than a week….I thought everything got delivered everywhere nowadays…seems to me that when people order on the internet stuff gets shipped around the world everyday

[@discipleoffire666]

AMAZING review! i just bought one and subscribed as well

[@NBSWELDING]

Did you use the NBSWELDING discount code?

[@discipleoffire666]

@@NBSWELDING yessir 💪😎

[@williecastillo9755]

Best review I've ever seen. Well done.

[@NBSWELDING]

Wow, thanks!

[@diverbob8]

If you look at the markings on the wire, I expect that it will be shown to be rated at least 300 VAC. You could put new a 230 VAC plug on the cable or make a short adapter so that you get 230 on the cable. The welder you have has the 120 VAC plug that would go into your now 230 VAC extension cord. BE CAREFUL. FYI, I just got this welder and it has the 230 VAC plug, and the jumper takes it back to 120 VAC. ALSO, the manual states that the machine is 60 % Duty Cycle so you have to give it a rest periodically. Another point to bear in mind, that machine is solid state and then you trip that breaker, that machine is very warm and then you lose the fan. When the happens, you need to haul ass and get the fan back on...

[@NBSWELDING]

I'm testing the machine so I'm not giving it a rest...I've tried to burn it up and so far it's taken everything I've thrown at it

[@diverbob8]

@@NBSWELDING I'd like to know if you have tried the suggestion that I posed above. I just did it here and had no problems...

[@NBSWELDING]

@diverbob8 I didn't and I don't want to...mine came with a 120V plug on the machine and thats what I want on there...I already have 120V 10ga cords that I use with heavy 120V tools and I can use those on 120V or 240V with the adapter I made...if I make extension cords with 240V ends I'd need other adapters to use those for 120V tools If I get anything that will run on 120V or 240V I'll have a 120V plug on the back of it...that's my preference

[@lowelljeff]

Great Video Thanks for what you do!

[@NBSWELDING]

Thanks for watching and commenting 👍

[@raymondquave2843]

Question did you take any welding courses I'm sure u did but u didn't need TO your a self made welder with knowledge which comes only with knuckle skinning love for what u do

[@NBSWELDING]

I didn't take any classes in the beginning...I worked an entry level job at a local shop first starting in 1990...in 1992 I took a certification test at a trade school and got WV State Certified as a welder...I worked for several more years in WV & Virginia in different jobs and industries until I started NBS WELDING in January of 2000....in 2003 I took a 3 week class at Lincoln Electric in Cleveland Ohio for API 1104 pipe welding and passed qualification with Lincoln there and then later passed qualification for Columbia Natural Gas. Not much formal education at all...mostly only went to training centers for qualifications

[@mackellyman5642]

@@NBSWELDING The training centers have served you well...The BootCamp of Professional Welders IMHO.

[@WalterBarger-io9ck]

Could you possibly put out a list on what size rods worked and which ones didn't work. I have to say awesome video hands down you really put that Arccaptain mig 200 through its test😎👍

[@NBSWELDING]

All sizes worked...3/32"-1/8"-5/32"-3/16"....they all work The only rods I've found that don't work with these budget inverters is 6010 in any size....but my testing showed that you can replace 6010 with 6011 if you need a cellulose rod that will weld downhill...I'll include a link to the 6011 video, the 6011 testing is at the end of it kzbin.info/www/bejne/rWG3n5KvbrKefcksi=3tlxdZ6v9aAnpo9-

[@catausborne2085]

I appreciate your time

[@bernienovak936]

Try air-arc gouging 3/16" carbons it would be awesome to try lol

[@NBSWELDING]

Good idea....it's on the list Thanks

[@kieranproven4874]

Fantastic review mate.

[@jamesward5721]

Ran a full 5kg box of 3.2mm 6013's today using an even tinier Yeswelder 145amp stick machine. No idea how the thing stuck it, it never even tripped out due to heat, not once. I had it turned up to all the beans, all day, welding 6mm plate - meters & meters of it. At the start of the day, I was waiting for it to trip out - by lunchtime, I was so sick of running rods I didn't pay it an ounce of heed, I just burnt rod after rod, ignoring the machine - it didn't even cough. Unbelievable. Better yet, I had it plugged into 220V, off a 50m extension lead, all on 13amp fuses. No way in hell did I expect it to run more than 8 or 10 rods before crapping the bed due to overheat. Machine didn't blink. I'm gonna ask it to do the same again tomorrow, run another full 5kg box of rods - I expect it will, will be surprised if it doesn't. How bored of running 6013 rods am I now? Very bored. How impressed am I by the tiny tiny welder? Very impressed.

[@jamesward5721]

I chucked the factory supplied leads, stinger & earth clamp in the bin right out of the box btw - am using much better quality, heavier ones - but that aside, the machine is bog standard.

[@NBSWELDING]

Thanks for watching and commenting....appreciate the info

[@todds5956]

That flux core has come along way.

[@gradysanders48]

Wonder if just the ac/DC stick Welder will perform same?

[@NBSWELDING]

Stay tuned...maybe I'll have more reviews coming on other machines

[@jaymorgan8305]

Thanks for the information friend

[@hanford_adventures]

Do you think this could do lighter dual shield jobs? I wouldnt see why not as long as you pick mix or c02 and have your polarity correct. I just picked one of these up instead of getting a suitcase as i dont have a dedicated mig in my shop so this would be going out with me on jobs and getting fed off my bobcat when im not home

[@NBSWELDING]

I'm sure it would work good for dual shield. When I MIG welded with it to build that awning over the swing I ran it off of the 240 volt outlet on my Trailblazer with .030 solid wire and 75/25 gas...worked great This is a more versatile choice than a suitcase and much lighter

[@NBSWELDING]

kzbin.info/www/bejne/oHiuhmhvgsR2n6Msi=cVUnHspfH_b1iWis

[@hanford_adventures]

@NBSWELDING yeah I would have gotten the xtreme 8 so it'd run the smaller spools to save weight cause I already have a tig set up for my bobcat and of course it does stick so all I needed left was mig but for the price and weight I figured it'd be a better option since it's cheaper and lighter

[@tomabc3918]

GREAT VIDEO AND A GREAT WELDER!!

[@NBSWELDING]

Thanks 👍

[@tonyman5417]

Thanks for the great review. I do have a question and your opinion would be appreciated. I am looking at the ArcCaptain or a Lincoln SP 140 T (price wise are about the same) entry level. Lincoln 140 is just a flux- gas mig welder vs all the capabilities of the arc captain. I am new to welding and just a hobbyist. Which of the two would you purchase if you had to make that choice and why. My only worry about the arc captain is long term performance. Where Lincoln will last and work for ever. Thank you.

[@NBSWELDING]

I definitely would choose the ARCCAPTAIN for its capabilities and it's unlimited ability to allow you to expand your skill set as a welder, fabricator, and repairman. A flux core 140 is a very limited machine and although the professional machines from companies like Lincoln & Miller are in fact built bulletproof I don't find that their hobby machines like the 140 are all that great...many people have had issues with them. So it's my opinion that unless your ready to spend thousands of dollars on a welding system then your better off going with a budget priced multi process machine from the start. It's true that the cabinet and other components are built lighter and with cheaper materials but as a hobby welder you can control how the machine is cared for much better than a company with many employees using the same equipment. When it's your machine to care for I don't think your gonna smash and beat on it like guys do when they use equipment that is provided to them...so I don't think it's really likely that your gonna have problems with your budget machine.

[@tonyman5417]

Thank you for your advice, I think I am going to go on a limb and order one. One more question if you don’t mind. Would you recommend me buying the wire from them ? and is their large view helmet any good. I think I may also order their plasma cutter, have you tried it ? Thank you.

[@NBSWELDING]

The flux core wire that I used in the review video when I was welding on the tractor trailer landing gear is from ARCCAPTAIN so you should be able to see that it did real well...that flux core is the only wire from ARCCAPTAIN that I have tried....I think you should compare their wire to what you have available near you and decide what to buy from that. I show the ARCCAPTAIN hood in many videos...I like it...it's the lightest hood I have and it has all the features of a high cost hood...I think you'll love the ARCCAPTAIN hood. I have not tried their plasma cutter.

[@tonyman5417]

Thanks so much for all your suggestions and advice. As a green horn here some guidance is always appreciated. I have been a CNC machinist for over 20 years so I understand metal. I just never melted metal I always turned it or milled it. Not used to adding material I have always taken material away 😅 Thanks for your input 👍🏼

[@don-iu1rx]

great review

[@MyFirstGen]

I would say that you beat the piss out of that little machine. Great review. Did you ever try the tig?

[@NBSWELDING]

I don't find any use for DC TIG...I can MIG weld thin material with .030" solid wire and I just don't run into anything that I would want to TIG on DC. I have an ARCCAPTAIN TIG200P that I AC TIG with on aluminum though and it's the best TIG I've got

[@carlmcgaughey7745]

Great review. Thanks

[@NBSWELDING]

Thanks for watching!

[@Mannshtt]

How did you run 220 off that cord?

[@NBSWELDING]

Made an adapter that plugs into 240V then has a 120V plug wired to it...making the 120V plug a 240V supply

[@transmitterguy478]

Does it TIG aluminum?

[@NBSWELDING]

If you TIG aluminum with it you'd have to do so on DC....no AC TIG on this machine You actually can TIG aluminum on DC and there are vids on KZbin about doing so but DC is not the normal way to do it....AC TIG is considered best for aluminum

[@wendell454]

How long is the gun on the arccaptain is it just a 10'

[@NBSWELDING]

Yes...10 ft

[@wendell454]

@NBSWELDING I think you can get a 15' their website has a module sg15 I've got a question sent to them waiting on answer if so I'll save the 10' for aluminum and use the 15' for everything else

[@wendell454]

That would be a great idea just leave the Teflon liner in the 10 ft at all times

[@davidskipperskip5403]

The hood did you like ,it looked like you did???

[@NBSWELDING]

Yes...still using it