Geeetech A20 | 3d Printer Review | Unboxing | Assembly guide

[@karas441]

Thank u for video I bought used one without instruction and yours video helped me .

[@architects3dp]

I'm glad it was useful for you =) thanks for your comment!

[@certified-forklifter]

hi, nice to see you back

[@architects3dp]

Thank you mate!

[@LadiHD]

Does this printer have the ability to resume print after power failure

[@architects3dp]

Yes! It does, but you have to activate this option from the menu of the printer. I noticed once I had a failed print

[@LadiHD]

@@architects3dp btw I’m having major issues with the top of my print. I upgraded the firmware of the printer and ever since the top of my prints don’t come out well. It’s a thin layer and it just doesn’t print properly. Before upgrade, it printed fine

[@architects3dp]

Maybe it’s caused by the slicer... i don’t really have this problem

[@stefankavaldjiev7079]

Hi want to take geeetech a20, is it still working good?

[@architects3dp]

Hi Stefan, it's been very reliable so far! The princ surface it's a bit destroyed but it's normal, since I've used it a lot. Get it ;P

[@stefankavaldjiev7079]

Is it stable continious printing pet and petg?

[@architects3dp]

@@stefankavaldjiev7079 never printed PET, but printed lots of PETG and works perfect. Just make sure you don't place the printer in a stream of air

[@FixDaily]

8:01 Your bed is loose, it needs to be tighten

[@architects3dp]

I will thanks!

[@MrSolidBlakeGaming]

Your desk is bent dude

[@architects3dp]

hahahah yes, it's a temporary desk. No worries :P

[@systemedmultimedia6526]

Hi. Glad to see you back after so long. A few questions about this video. Do you think you do another video on how to add a proximity sensor to this printer ? Also, how does this printer compare to the two printers you made yourself already ? Furthermore, what changes can you make on this printer to improve it (if it needs any) ? Thanks to answer.

[@architects3dp]

Hello friend, I could make a new video featuring the proximity sensor installation if all of you ask for it, as well as the comparison

[@systemedmultimedia6526]

@@architects3dp Thank you very much. Will you also post a video on how to improve/fix this printer ? I've heard that it needs some fixes/improvements and I thought that it'll be interesting to see your take on this. Take care and keep up with the good work.

[@architects3dp]

For sure! Take care 😊

[@vik3706]

Man it has been so long since you posted a video. Hope you're all right

[@architects3dp]

Thank you guy! Nice to be back and read this comments 💪

[@horaciomonaco8408]

Excellent video as usual :) Even if it is not fulle related, I take the chance to ask you about a weird behavior in Cura. I've got a .stl for an electronic card's case. When I open it in Cura everything looks fine (see box01.jpg) , I can slice it without any issue but when I preview the job the junction of the walls (corners lower part) are missing!!! (box02.jpg). In the link to my Drive, you can fins some snapshots about this matter and the original .stl file. Any lead to solve this? Thank you in advance

[@architects3dp]

Hello friend, I think you forgot the drive link

[@horaciomonaco8408]

@@architects3dp Opps... never mind, I've got a fixed .stl. Thanks anyway for your availability

[@drixment8956]

One cuestion, are you Spanish

[@architects3dp]

Yes! Why? ☺️

[@avejst]

So so printer Dont like that the wire to the printhead is not striped to the boden feeder Thanks for sharing :-)

[@architects3dp]

I’ll check it out! Thanks!

[@Pushpam1995]

Please make you own logo T-shirt from coming next videos.

[@oo9467]

I wouldn't call that a good print as you can see loads of ghosting lines in the print you should have celebrate e steps and filament flow but apart from that good explanation of the printer

[@architects3dp]

I can't see any of this 😅