How to Drywall a Dome Ceiling with Archways & Ceilings Made Easy

Made to order Dome Ceiling Kits: www.archwaysan...
Ever wonder how to drywall a dome ceiling or wonder how to get drywall to bend? Well, Archways and Ceilings Made Easy will show you how to properly sheetrock a domed ceiling. Remember Archways & Ceilings is with you every step of the way.
*New Dome Ceiling Video* • Universal Dome Kit: Ho...
For More Information: www.archwaysand...

[@D_SQ]

Tradesmen are awesome. That guy doing the install is absolutely talented.

[@aethertech]

The comments of some of the people here complaining about the "over use of screws." There are a few things in life that you shouldn't fuck with. The IRS, human stupidity is infinite, and building code inspectors. And of those three, only the middle one is an actual unknown. The Code is the goddamn law, especially in the USA. You do not fucking go less then the code - if anything, you go over the code. I've seen an inspector pull out his measuring tape because he found one stud that was a quarter inch off from were it needed to be, three hours later he handed the manager of the site about ten pages of stuff to be fixed - and had a copy himself for the official write up back at whatever satan pit of an office he worked at. IRS < Building Code Inspectors.

[@jahangirKhan-vc5zp]

ماشاءاللہ ماشاءاللہ ماشاءاللہ بہت ہی خوبصورت انداز میں بنایا ھے مسجد کے مبر کو اللہ سبحان تعالیٰ آپکو کامیاب کرے آمین محمد جہانگیر خان سونے کے ہاتھ مزدور پاکستانی کراچی

[@FoxtronInk]

30 years hanging board and framing. Still, I learn new ways every time. Thanks.

[@hermanooscarsolis]

I'm a drywall contractor in Miami, Florida and I do all domes with paperback wire lath and always will be more easy and fast and dor the finishing we apply one cote of veneer plaster and 2 or 3 cotes of 45 durabond joint compound.

[@Regis1314]

I'm fascinated to see the work of you, also working with drywall here in Brazil, but here everything is very expensive, a drywall lift paid $ 1,000, $ 200 banjo and an end to the base $ 25 m2 of liner installation.

[@BetterDoYourHomeWork]

i know nothing about domes OR drywall, but this was a lot of fun to watch.

[@ArchwaysAndCeilings]

+BetterDoYourHomeWork lol Thanks!! Appreciate it

[@emirsaripov7598]

44

[@eyleyley5380]

.

[@dodo4441]

Emir Saripov عقم

[@franciemamino6396]

Do Do

[@mathman1923]

that is so cool. I was looking at a house built inside a old grain silo and thought someday that would be fun, but had no idea how you would sheetrock a round wall. Doesn't look that bad.

[@renatomurillo7215]

Awesome team. I read the comments about safety... it's TRUE... I can't hand some safety protection but since they do a excellent job , you need to take care of them if they don't feel comfortable force them and explain all risky situations. Better safe than sorry. Am impressed with their ability and great work. I would love to have you for my house when am ready.

[@charlieseguel]

Great job guys. That dome is a work of art. I am a fanatic of drywall work designs. Is the best and nice for construction. Very very cool!

[@fasoldtgardens9585]

Aaah, the old "OSHA safety squint" technique. I know it's saved my eyes over the years countless times when using a drywall router!

[@endoalley680]

Es la systema OSHA de Mexico.

[@dacnaigarci2992]

Ajjajjaaa

[@KGRVINES]

Fasoldtgardens. Q1

[@RailyardProductions]

@JennaHaze2000 I used an old 10' mesh satellite dish. Framed it up into the ceiling then sprayed plaster onto it using a curved form to shape the plaster to the dish. Took about 3 hours to get it done then all I did was lightly sand it smoother.

[@McVlogg]

Well, here in Europe most walls are made froms bricks or concrete. I am not a Pro but if you build a dry wall here you are adding an "airvent". Thats because sometimes it can happen (wintertime) that hot air condenses on cold walls. So to enable aircirculation and keeping the drywall an the brickwall a DRY wall. The passing air takes away the humidity and so prevents molding. I just realised that the walls in the vid ALL are wooden. google the german word "trockenbau lüftungsgitter" :)

[@keithparker117]

I like seeing video on drywalls now I do get experience on drywall yet.my dad used to put up drywall. I would like to learn about it

[@Chuffin_ell]

keithparker117 if you have the physical ability, please do. If you aren't physically able, do something else you are interested in. Point being, don't hold yourself back from doing and trying.....Its a big world and it's full of people who don't do anything and don't seem to want to encourage others either. Set high goals for yourself and act on them. Then you can be an inspiration for others..... Best wishes.....

[@keithparker117]

think you

[@m1keway266]

Good job Jesus, and you did that skilled work, for 9$ an hr.

[@TheWickedShitCom]

Great video. Can't help but feel disappointed that I didn't get to see the guy finish it though. A follow up video of mudding and taping the dome with a link to it at the end of this video would have been a nice touch.

[@jonathanparchmont3531]

You guys need a forum like a convention. Share tips and tricks in person. Help people to help themselves or if need be have a professional help them is a brilliant idea. They can learn "how to" and "who can help" all in the same place. But just for small contractors and invite mark 1 plumming so you can help rebuild his company reputation. Better publicity.

[@ArchwaysAndCeilings]

hahahahah... i had to google Mark 1 plumbing... he could use some better PR. ;)

[@19dadream86]

ive seen alot of vids for construction, they try to rush everything or dont say anything, yours are well made, cheers mate

[@evega747]

you say you just need a little tape and drywall mud to finish. you forgot to say it takes a skilled finisher to do the job.

[@hamb7260]

Gifted hands and very meticulous. Very nice job.

[@Celzot]

i really enjoyed your videos keep em coming. Props to the hard working guys there as well

[@bobv8219]

can't beat a good hanger, hang on to these guys. 28 yrs framing 4 me. nicely done video brother

[@ArchwaysAndCeilings]

Totally agree... a good hanger is a game changer. Thanks for watching!

[@ArchwaysAndCeilings]

Where are you located? In the states you can get pricing at ArchwaysAndCeilings . com (Framing Kit Price) Generally here, to finish out a ceiling it usually costs the same as the framing kit. For example, a 6' dome sells for $329.95. To drywall it, it will probably cost you $330- 400. At least that is the case here in Texas. Other parts of the United States might cost more. Our labor here, is lower then most.

[@nickycritic5269]

And then of coarse double that up for your minimum fire rating right? IDT a 1/4" of drywall will cut it. (@ least it won't up here in NYS) cool idea.

[@Shuffler703]

in the metal fabrication business this is called onion skin. Used to repair 2 to 1 elliptical heads on vessels. I do layouts and laser programs to cut the material.

[@ThePrescottman]

I love the commentary... Captivating.

[@noelochoa2369]

yo e echo ese trabajo por 18 años y puedo decir que ese compa es profesional

[@saeediqbal9398]

Very good job

[@TyhlerNovac]

had to put a half Moon dromer out .. that was fun in and out

[@EllieBowers]

This is so cool , I dont do any of that but I love to see how others use their work skills , Amazing job

[@ttk1098]

You could probably set you a makeshift jig with wood using a cut tool and that damn thing would be awesome

[@rtel123]

much less waste to alternate the triangles from a rectangular sheet, instead of discarding half triangles

[@randyhelzerman]

Those are some skilled people.

[@adlerzalim]

interesante tema

[@alexandrealves7570]

I'm a drywall installer here in Brazil. Are they in need of labor? I want to migrate and work out.

[@akede2001]

Great video, thank you! Informative all the way through and no BS, product sales, or other annoying add-ins. :D Looks like a lot of fun to do.

[@thapelokhumalo6397]

Nice tutorial

[@Vin3817]

unbelievable. Awesome job man

[@ArchwaysAndCeilings]

Thanks! We appreciate the comment!

[@Nookinizm]

The Archway finished is a beauty!

[@moonson1000]

the worker is brilliant.....

[@thomasabbott8974]

I found watching the video. Very helpful. An good to see how yous put it together. Yous made it look so easy. Thank you.

[@olivetdog]

all those old 7-8foot fiberglass satellite dishes that are useless these days make great dome ceilings, no joke, we did a 5 million dollar house that used one at the top of the spiral staircase, and it turned out flawless

[@ArchwaysAndCeilings]

I have known a few builders who have used this method. Probably the best use for those old satellite dishes :)

[@johnknoefler]

I would be cutting a pie sheet that covers two sections. Wet thoroughly and screw down in the middle. Cut second set and overlap first in staggered configuration.

[@LUckybones25]

That looks like a fun project.

[@raymond060]

Great video

[@vliegendehollander55]

Great Job..! Don't worry, i did a lot off dry wall work, also a 10 dollar goggle is fogging when you are at work, then they even more dangerous then to use non by dry walls.

[@ArchwaysAndCeilings]

Thanks!!!

[@alamintaromia9190]

ok

[@alamintaromia9190]

BABUL./0096891639248

[@99cachorro]

Of course, don't forget our short brown brothers from the south, best hangers on the planet!

[@kentdiffenderfer5213]

would have been better if they painted clouds and an airplane

[@XBKLYN]

Great vid......love watching pros do their thing.

[@germanmendez5865]

Nice work I love it

[@calvinbrown3213]

Ya know one bad roof leak and the dry wall is ruined with major repair costs. Stucco or plaster is still the best way for longevity of a project.

[@eddiecharles22]

Nowww hear hear, the lads new they'd be on camera and i would of done the same. Imagine what a lil facetime on youtube just did for their careers.

[@Marcelo-bb5fp]

I do these types of services a lot here in Brazil show show

[@ldmarley]

Thanks for posting. Beautiful work. Would love to see the finishing portion, taping, mudding and evening painting and mouldings.

[@gugolero]

Good job. Congratulations to those workers

[@gregharing2967]

Very nice

[@ArchwaysAndCeilings]

Thanks!

[@redsoil5]

It's easier if you assemble the dome on the work table then dry wall it & screw it on the ceiling.

[@ArchwaysAndCeilings]

+redsoil5 it would be super heavy and be extremely difficult to lift into place.

[@Cadaverine1990]

I was inquiring about the costs incorporated into the whole process from framing to texturing on a dome like this. Where i am located vaulted, groin and other specialty ceilings are $2.34 a squ/ft labor based on 10ft ceilings. Just wonding if it would be competitive to place a Dome over a reading or dining area vs a vaulted or groin.

[@juanvalle6545]

muy bueno

[@marcelvasile25]

bravo sinteti foarte buni nota100

[@antoniomarcosdecampos9599]

ola boa tarde meu nome é marcos campos moro em sp brasil é um trabalho muito lindo com um acabamento incrivel mas gostaria que se possivel com legendas em portugues brasil

[@schoralokinzi8779]

J,ai bcp aimer le travail

[@GlassblockMGB]

10 times faster and better if you use galvanized mesh with tar paper behind it ,then plaster it.

[@kumpulanlagudanvideovallen4759]

lukisan pemandangan d rilis akan kami tonton lain kali dan lagu kuos plus tempo dulu

[@daleleibfried8648]

what is your dome framing made of.

[@leyendacm5352]

Quedó muy bien el detalle de Drywall saludos ,de lima Perú

[@Order-in-Chaos]

Over the top, scarface style house designs. "Say halo too my leetol dome"

[@ArchwaysAndCeilings]

+Order in Chaos Ha! double thumbs up for scarface reference.

[@MrRies007]

Ziet er goed uit ! Groeten uit Holland.

[@xXxPobrecitoxXx]

good job boys only 200 more sheets to go...HURRY HURRY! -El Jefe

[@hel000yo]

the guys that finished this job, must be really good, i would hate finishing it

[@tomasjolin2298]

Any taper i know wouldnt take that job cause thats bullshit. Its not done right it couldve been two sheets 1 joint not all those little pieces

[@MrRichinil]

you guys make it look so easy !!

[@ketanchaudhari36]

good

[@sundown798]

Man I love hacking up Gypsum in the mornings. Oh well back to work

[@RonAnderson-zs1kf]

This is so nice. Galluchi did Tommiono did a similar at Paolo building 🏢

[@AishaLi]

Wuauuuuuuuuuuuuuuuu... Wonderful

[@Maxid1]

If I don't have a drywall router, can I just use my lightsabre?

[@HypedUp89]

LOL "A little mud and a little tape" what a joker XD

[@WesleyScott]

Some call me the gangster of love.......

[@HypedUp89]

@@WesleyScott he must of had some good joker weed that day

[@WesleyScott]

HypedUp89 haha 🤙 nice 😉

[@alvaromateus8609]

Good

[@macca9587]

thanks might help me in my plastering apprenticeship (im in the uk)

[@ArchwaysAndCeilings]

@bnewton81 you can score the back but scoring the back of drywall hurts the integrity of the drywall and can lead to future cracks in your ceiling. * The drywall will not be as strong. Wetting the back I think is a lot easier and just as fast. The key is to wet it before you start working so when you get to it...it is ready to go

[@joegarcia9520]

Great work look awsome.

[@strumpeteer]

Great skills. Awsome work.

[@JOSEACruz-xv6em]

that's a good job men!!! buen trabajo hermano los dos lo hicieron perrroooonnn!!!

[@user-ys9tq3uh1]

Сразу видно,что профессионалы работают.

[@Texno_Login]

Работа непростая👍

[@amarreally5419]

I am from Iraq لاكن something very beautiful now ومتابع on KZbin your business I like greeting lakh of Iraq

[@drywallcollinsperuConstruye]

Very good my friend, I'm living in Peru, also here in Peru, we do same, but with steel frame, here we don't use wood frame, I now it because i was working in USA five years, for that i know litle English

[@thedoctormonster]

Great job

[@buck4472]

it's best to hang the band around the dome before you do the pie pieces to get a better fit and line up and its easier to measure and hang Mark the drywall man

[@davidchidester5463]

Not really. Then you'd have to trim your pie pieces more to fit instead of having room to line them up.

[@ArchwaysAndCeilings]

I don't quite understand the question. The dome ceiling is an interior dome, it doesn't get wet. Usually the dome ceiling is in the attic space of a home. Are you referring to wetting the drywall to help it bend?

[@baker5727]

حلو الرش بالماء

[@356379783]

wow, beautiful work, but takes tremendous amount of time

[@gideonpius3458]

I so love the knowledge display here. Thanks

[@ajmalkhan5369]

nice

[@thomasabbott8974]

Thought enjoyed watching Yr video here. Real very interesting, 👌

[@markosrs]

Bacana, apenas faltou EPI ( equipamento de proteção individual ) no caso o óculos. :) Ótimo trabalho.

[@leonardoricaprio9565]

those dudes I think in the video worked as extras in the movie dances with wolves.

[@khaledbek102]

with what you wet the drywall? just water

[@mtzlypk]

nice job ,never drywalled a dome ,archways yes...thanks for the info

[@NdrHrlnd]

Trying to replicate Hadrian's Pantheon. A dome should be done in stone. Drywall is great for ceilings. I like my walls made out of brick or concrete.

[@user-nv1mt2rm1i]

دقه عاليه ومهرها أذكياء

[@ramonherrera1657]

No ppe for pedro and juan?