ArciTech drawer system: assembly, installation and adjustment of drawers

The ArciTech drawer system allows to combine many side elements with one drawer side panel as the entire system is based on a platform concept. Even exchanging side elements after installation is possible.
This video is explaining the setup of the ArciTech drawer plattform: • Video
This video explains how to assemble drawer side panels, bottoms and rear panels to become a drawer. It is recommended to use an ArciFit assembly aid as it speeds up the assembly process and avoids damages to drawer components.
Front panels are mounted to the drawer without using tools. The quick assembly also features simple disassembly by pulling the disassembly lever with one finger. Very useful e. g. for cleaning dirty drawers in every day kitchen use.
The assembly of ArciTech railings, TopSides and DesignSides for pot-and-pan drawers is also very simple. For these components, quick disassembly is an interesting feature as it allows to change side elements anytime. This way, every pot-and-pan drawer can be customized to individual customer design preferences anytime and anywhere.
For cabinet installation, drawers are simply pushed onto the Actro runner. Drawers and runners connect automatically.
Hettich keeps developing further details: In 2014, the new and optional Push to open Silent function was awarded by the iF Product Design Award: • Video
In case the front panels are not perfectly in line: sideway overlay and height position can be adjustment using the screws left and right of the drawer. These screws should afterwards be covered by cover caps. The tilt of high front panels can be adjusted via railing or adjustment screws in the DesignSide or Top Side.
There are a number of tools available to support the assembly and installation process, e.g.:
- ArciFit 100 for drawer assembly: • ArciFit 100: Assembly ...
- Accura drilling jig for runners: • Accura drilling jig: A...
- Practica 200 for manual drilling of front panels: • Practica 200 drilling ...
- BlueJig for manual positioning of front panels: • BlueJig marking jig: A...
For more information, visit www.hettich.com

[@PHPATIL-tv9hp]

Very good

[@JagmeetSingh-ve8kp]

good job

[@NageshwarRaoPinna]

What is main difference between this n inotech?

[@HettichEnglish]

Hi! Thanks for your interest. InnoTech has been on the market for almost 30 years and is combined with our Quadro, which features ball bearings. ArciTech has been around for a good 15 years now, it is a little more modern in appearance and is combined with Actro, which has roller bearings and therefore a slightly higher load capacity and even better running properties. We hope this will help! For more information please visit our website or contact our customer service via [e-mail]! 😊 Kind regards, your Hettich Social Media Team

[@radar02626]

Do I need to use a 16 mm drawer base or will 12mm be ok

[@HettichEnglish]

Hi! The distance is designed exactly for 16 mm. Thus, 16 mm is highly recommended here. Otherwise, there would be too much air between the floor support and the wiper strip. We hope this helps you! Kind regards, your Hettich Social Media team

[@rahulranalkar9255]

@@HettichEnglish Thank you. The .pdf with the product is not legible. I am using article # ........Please share what should be the height of the rear board Second, what should be the vertical distance of the front snap from the lower edge. Appreciate your support. If you could share a legible copy of the installation pdf, that would be great help !

[@HettichEnglish]

@@rahulranalkar9255 Hi! Please contact our customer service via [e-mail], they will hand out the information you need. 😊

[@saas3333]

Best

[@user-kt9ht4gb7n]

После таких пару десятков шкафчиков я бы больше Балтики выпил.

[@itscoconutsaregood]

punch screws into chipboard.... really?