Arctic Cat ATV/UTV Clutch assembly

Arctic Cat ATV/UTV Automatic Clutch assembly

[@bryanford1139]

WHOA! Livin' on the edge, stickin' ur fingers in there while it runnin'. That's how those farm machinery accident placards came about :)

[@jeberjaber]

Watching you stick your hands in there with it running to fix the belt made my eyes go wide

[@leek7412]

Scared the shit out of me when you grabbed the belt with it running.my brothers fingers are messed up from that one tore off.

[@orbit1138]

Good reply that scene might cause someone to get fingers torn off. Never put those fingers where that guy put his.

[@ariel17123]

The secondary clutch wont spin if the fourwheeler is in park with an automatic transmission. Youd need for it to be in neutral for it to spin. Very good video. Used it to replace a belt on a 2016 artic cat 500

[@jjclarkson3261]

Don't recommend RED loctite, which requires HEAT to remove. Blue is fine. Very helpful video to simplify clutch and belt operations

[@michaelanthony7000]

great help ive changed a few belts before but wanted to make sure it was the same on an arctic cat ive only ever changed one on snowmobiles and a polaris sportsman but this is the same thing lol

[@20_below]

Thank you very much for this video. Made it so easy to put a new belt on my 2012 Wildcat. EXCELLENT VIDEO SIR!

[@odiez71]

nice tip useing cover bolt to hold driven clutch sheeves open,it dident show that in a cd service manual i have, thanks for this video badass03taco

[@mechanicforlife9468]

Great video! thank you.

[@mcedillojr]

Love the video keep up the good work .

[@welder878]

thank you for the great info but i was wondering if you could show the tear down on the secondary clutch so i could see the roller and spring assembly

[@jonpin78]

Good lord! I wouldnt be putting my hand in the clutch with the engine running seems very unsafe wouldnt recomend anyone to do that.

[@WBOS72]

Thanks for doing this video. If you dont have an impact, how would you torque them?

[@vincem7069]

What if the belt doesn’t rise to the top of the primary clutch? I’m relatively sure I got the primary on all the way.

[@kikemazariegos2659]

good video. I have a question. My atv suzuki 400 accelerates but does not walk in any speed nor the 4x4. What do you think may be the problem? THE CLUTCH?

[@bobooncrack]

heyy my back part of my primary clutch is rubbing against the dust cover closet to the motor

[@Raksonevs]

I have a Can-Am outlander 500 2013. Where does the slip happen when the atv starts moving? Is it between the belt and the pulley or is there a separate cluch for engaging?

[@natetew69]

So if mine started slipping you think it could be a belt or one of those clutch’s

[@steventhorkelsen6478]

2006 arctic cat 250 utility atv, all gears work fine just high it seems to slip every 1/2 second constantly . Any ideas what it might be ?

[@christemple254]

hello i have a 2011 artic cat 1000 ltd. and i am looking for performance clutches. i placed 30 in silverbacks on it but cant find the clutches to turn these tires. called artic cat they cant find any. so i pray you have a answer for me thank you.

[@calvinschulzrse2112]

What size sockets are used?

[@JuanVazquez-gg8nc]

What are the symptoms your clutch is bad or going bad on a 07 Arctic cat 250 2x4

[@davidhart6189]

What size impact sockets do you use for the primary and secondary retaining bolts?

[@TheHunter1o1]

36mm and 32mm

[@smartguy8505]

Specs say torque is 75-90 pounds where is this where are you getting 185 Ft pounds from?

[@dewimccar9780]

Good info in the vid, but putting your hand on a belt with the engine started is not a wise move. I use a quote at work fairly often at our toolbox meetings ; "DON'T put your FINGER where you wouldn't but your DICK" That usually brings out a laugh but gets the message across loud and clear. Plus, imagine the reaction from the lady in the office the first time she saw this while writing up the weekly reports for the safety minutes, once explained they got a chuckle also.

[@maximeblondinimmo]

what is the size on the bolt that hold the primary clutch ? 24 mm or 26 ?

[@amandabartley2584]

Some are different the socket size for mine is 27 mm for both secondary and the primary do not add grease to the primary clutch just on the inside of the housing of the primary so it can slide across that slave good and easy and don't use brake cleaner on the Belt discus clean everything with PB Blaster let it soak then wash it with soap and water rinse thoroughly dry it dryly dry it real good and you will never have no slips if you use brake cleaner you can get it off of there but the surface will still be too slick use dry oil to wipe it clean wash it with soap and water dry real thoroughly

[@michaelhantula5665]

I ordered the ptomao clutch from a dealer ship on June 3rd and will not get it until 11/22 total cost from clutch,,$725 :00 -:rollats $64:00, clutch cover bolts $2;00 a pice , gasket$44:00 .all this is on order from SS artic cat dealership Mercer wis . this is redickless waiting, wonder if dealership tried to call someone else, or eve chick on shopping time , I don't think he is. Trying to help me at all

[@pepeks1911]

What is the name of the red paste?

[@geraldlamothe6091]

LocTite

[@welder878]

yo I did a typeo I meant the primary clutch

[@LEE5061]

grabbing the belt when the engine is running is not the smartest thing to do.....instead of having the name badass03taco it could be nofingers03taco if keep pulling that stunt !!!

[@hudsonhollow]

Your advice was perfect until you grabbed the belt with a running engine!!! DON'T DO THAT!!!!!!!!!!!!!

[@verticlehold]

Ya'll be try'n to be teach'n those country folk that bolts be tighten and nuts not be loosen cuz ya'll be F'n it all up and loozen ya'll fingers if U be fallen my methods. Cuz i be hav'n no clue to wut I be do'n while speak'n no ingish alung da way

[@michaelhantula5665]

Don't think SS artic cat ATV dealer ship is trying to help primary clutch__$735.00 rollers at $74.00, gasket,_$44..00 I would if he shopped for a better price. Or is he going to stick it to me with one Ky Jell ?? I used to get kids before I got FUCKED.

[@Rocky-ug1ng]

how could someone down vote this post?