Arduino + AD8232 Module + Processing IDE | Arduino Uno with AD8232 Heart Monitor and Processing IDE

[@medamine1035]

if you're having too much noise with the sensor reading try to unplug the pc charger the result will be much more better! i guess the module need a very stable voltage.

[@yesihavereadit]

@medamine1035 yep see my comment. I thought it was broken then I unplugged and hey presto.

[@medamine1035]

@yesihavereadit Yup, thanks to your comment, I figured out the trick.

[@yesihavereadit]

I still can't believe you can buy one of these for 6 or 7 quid delivered from China and it works!

[@maortredknight3925]

What a nice person..

[@roboarjun]

Some are available under 6 quid as well!

[@yesihavereadit]

Another reason to unplug the power from your PC is that the switching noise from cheap power adaptors will ruin the signal. . If you put electrodes on your chest the signal us much much better.

[@utehstr]

Thank you for your feedback 🙂.

[@medamine1035]

yes sir that worked well for me ! my question is do i get the same noise if i'm using the module with dc source (a battery)?

[@dungnguyen-si2sz]

Sir, thank you so muchhh, you are my saviorrr

[@utehstr]

You're welcome🙂

[@seyedsajjadmirbakht278]

Man, the output signal you demonstrated, has nothing in common with a ECG signal!

[@elvessilva9758]

HELLO, IT DIDN'T WORK HERE, I DID THE INSTALLATION THE SAME WAY, THE GRAPHIC DOESN'T APPEAR IT IS ONLY ON THE TOP PART INSTEAD OF THE VERTICAL, CAN YOU HELP ME

[@royalagent855]

How to remove the noise it is not a clear ECG waveform

[@oumoudiarra4515]

I guess this is the 50Hz (or 60Hz depending of where you live) noise that he was trying to avoid by telling you to wear shoes; a solution would be to somehow add a low pass filter to the acquisition chain

[@allanmolotla1344]

Me salen solo ondas sin sentido. que podra ser?

[@djokopudyanto1979]

Wow...berharap firebase..tapi ini keren juga

[@utehstr]

Saya lagi tertarik sama modul ini, jadi sekalian saya buat konten :-) Untuk konten firebase juga saya belum nemu ide.

[@Whatnoname928]

This analog or digital?

[@sarupdhar7965]

Can u make one video abt how to make low pass filter in ecg monitoring system...!!!! It will help me

[@yousra8287]

Please how can i Fix the squar wave ,, or how can i make m'y laptop on DC ?

[@tubagustuska9691]

Hello, How can I convert this waveform to be HRV ? Thank you

[@YeneSpace]

What does that mean? Isnt it accurate? I'm living in a 3rd world country (a very poor 1) and I was going to build the ECG analyzer. Is the data accurate enough to use it as a medical device? My government is okay with it as long as the output is accurate enough.

[@utehstr]

This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions. Look here : - learn.sparkfun.com/tutorials/ad8232-heart-rate-monitor-hookup-guide/all - www.sparkfun.com/products/12650 I can't be sure the data is accurate or not because I don't have a comparison device.

[@Suncatcher173]

Hello. Do you know an easier way to monitor the heart beat of a person with only a "beep" without any patch? Maybe via a smart watch?...

[@juniorfisher7228]

i realize I am quite off topic but do anyone know of a good place to stream new tv shows online ?

[@nektarioskourakis8331]

Hi from greece , GREAT JOB!!! Keep on.Can yoU do a tutorial how this pde.sketch transform it to work in android tamplet? I tried with APDE app but ....i failed. THANKS

[@amenoko6070]

the electrodes should be placed closer to the heart

[@utehstr]

Thanks for the information :-)

[@giustivip]

Mantaps

[@utehstr]

Terima kasih :-)

[@yogeshitaliya473]

Nice one

[@utehstr]

Thank you :-)

[@mdmarufahmed9323]

bro can"t get the app

[@БорисГоликов-з2з]

ты вместо дурацкой музыки текст говорить?