Arduino Project - Smart street light system Part- II #arduino #project #robotics #finalyearprojects

Visit My Website For More Details -
stauseef123.blogspot.com/
Hello GYZ welcome to Arduino Project and in this tutorial, i will show how to make a smart street light system easily.
WORKING: -
When it's Dark the LDR will switch on all the LED's and their brightness will be full / 5 (255 / 5) and when any obstacle is detected by the IR sensor the respected LED will glow with full brightness for 3 sec
If required do the modification in the code and Do the connection as per the code
I will show -
- How to connect LRD to Arduino
- How to connect IR sensor to Arduino
- How to connect LED to Arduino
Components Required: - Amazon Trusted Links
1- Arduino Uno Best price - amzn.to/44ogVBo
2- IR Sensors (2) Best price - amzn.to/43v0f9T
3- LED 's Best price - amzn.to/2IE1uub
4- LDR Best price - amzn.to/2lIlhj1
5- Resistor Best price - amzn.to/3XNOaM0
6- Jumper Wires Best price - amzn.to/2RoW1Od
My Email ID (Contact Me Here)
[e-mail]
Code: -
fumacrom.com/1IuDy
Or
www.mediafire.com/file/vdjbhd6ge7k4ui1/new_smartlight_system.ino/file
Link for Circuit diagram
fumacrom.com/1Jy2q
OR
www.mediafire.com/file/kiyvq3mcv5k93m8/street_light..jpg/file
THANKS FOR WATCHING
Plzz like and subscribe

[@kevalproject5164]

Nice tutorial..मैं भी यहाँ से सीख कर अपना project बनाया हूँ ..bhai please ऐसे ही और vedio banavo ..

[@paofran6746]

Is it possible for two LEDS to respond in a single IR Sensor?

[@bkharshit]

Can I use your code directly? Or do I need some file for IR sensor in Arduino software in my laptop

[@KushagraGuptaMusic]

hey plz answer...that will value of resistors change if we use less than 5 ir sensors???..plz answer

[@electro_king_official]

Nope .... same resistor u have to use

[@KushagraGuptaMusic]

ok thanx 👍✌

[@yogeshagre2761]

You saved my life thank you so much

[@MdMijanurRahman-zv7lt]

I can't download the from this site that you given in description box. Can you help me to download the code?

[@joejungle2949]

Sir is there any command beside delay(); ? im having trouble with my project. cuz Blocking functions prevent a program from doing anything else until that particular task has completed. this project need multitasking command right?

[@electro_king_official]

No delay function is used to keep the lights ON for few seconds and the code is 100% working And the code is not multitasking, set of instructions get implemented when the condition is true

[@kavinkavin1220]

It's working 100 % only two light

[@prakharpandey6405]

Can I use more than 5ir sensor for more street light . If yes please tell how

[@jayeshambulkar9079]

Can we use SONAR instead of IR sensor here? N what's difference will it cause if no

[@electro_king_official]

IR and sonar (ultrasonic sensor) both work very differently, ir sensor uses infrared light and sonar sensor uses sound waves and i have written code code for ir and if you want to use sonar sensor then you have to change the code because we have to declare triggering destance in that case

[@jayeshambulkar9079]

@@electro_king_official which will be better to use ? I already have an ultrasonic sensor

[@electro_king_official]

@@jayeshambulkar9079 It depends on you, both the sensors are accurate but in ultrasonic sensor you have advantage of long distance and during sunlight ir sensor dont work properly but ultrasonic works well and if you use ultrasonic sensor then you have to write a new code for it and if you use ir sensor then use my code directly

[@jayeshambulkar9079]

@@electro_king_official okay thank you so much for the help

[@himanshumadhukar2618]

How we gonna supply power to all the led and adruino ....if battery then where it will be connected? Please help out

[@electro_king_official]

Directly through usb cable comes with arduino or if you want to use external power supply then connect the positive terminal of the battery to vin pin of arduino and negative terminal to gnd

[@himanshumadhukar2618]

@@electro_king_official thanku

[@mousumisaha2303]

sir, from the links you have provided for the arduino code is loading for this project .Sir please help me out.

[@electro_king_official]

You want code ?

[@hammadghumman7223]

bhai code upload krne pr leds glow krna shoro kr deti hain ldr pe hath rkho ya na rkho ldr is mei kam ni kr rha .. plz tell what is the problem.. or there is problem in code.. help me bro

[@electro_king_official]

Nope code is 💯 working and do the connection as per the code it will work for sure

[@electro_king_official]

And download the new code, you will find the link right down in the description

[@dhananjaythakur7754]

Sir, i don't want to use LDR sensor. What to change in code for it?

[@shivamagrahari4046]

thanks man can i add a rf receiver to further switch on red lights for AMBULANCE and other emergency vehicles

[@electro_king_official]

yes you can

[@syedamuqadas5625]

You are a life saver 👍👍❤️❤️

[@VinaySingh-et8bu]

What is the IOT thing in this whole project?. Coz its only related to Arduino. What if we want to use IOT?. How can we do that plz say

[@vikasgupta293]

what do you connected for power 🔋 supply ??? a laptop or something else

[@electro_king_official]

yes i used laptop to power the system

[@shivverma1459]

sir it is doing opposite of what it should be doing that is glowing in brightness and getting off in dark please help

[@PYUNGIAKHIZAW]

Brother, how LED light without battery 🔋?? We don’t need battery in this?? Please explain.

[@jhenkar_2008]

IF I REMOVE LDR WILL IT WORK

[@Mika-mg6hw]

Hai can anyone help? My 1st and 3rd led doesn't light up well in normal situation but it's working fine when ir sensor is being hit. I've follow every step in the video and i just couldn't figure it out what's wrong here

[@Mika-mg6hw]

I've change the led, change the led wire, change the led position but still it's the same. The 1st and the 3rd led not working correctly

[@shreetejakulkarni8826]

We have made the connection as you show in the video but it is not working

[@RezwanulIslamRawnaqueNSU]

LDR sensor didn’t get connection though i connect as you showed

[@salonilohar2176]

Thanks a ton tauseef ..really helped me a lot..♡♡

[@electro_king_official]

you welcome saloni

[@rafaelbbl8298]

Can you gave me a schematic and block diagram for educational purposes only thank you in advance❤

[@electro_king_official]

@@rafaelbbl8298 link is in the description you can download it from their if you need any help you can contact me here [e-mail]

[@KushagraGuptaMusic]

bhak why some leds gets off when brightness of other leds is increased ??...plz tell any solution ...

[@tejark1059]

Give supply to ir sensors through separate source

[@KushagraGuptaMusic]

Can we connect two Leds two single ir sensor? ?

[@electro_king_official]

Yes you can but you have to initialise the pin no of the led and set them high when there is a car in if else loop

[@KushagraGuptaMusic]

Instead can be join the negative legs of two leds together...and the same we we can do with positive legs and then follow the same circuit by treating that as a single led joint (as shown in the circuit i.e. one led with one ir sensor) ??

[@electro_king_official]

@@KushagraGuptaMusic But prower will be divided between both the leds... Try it will work ..connect the negative of both the leds to gnd and positive to the signal pin of arduino

[@KushagraGuptaMusic]

@@electro_king_official OK thank you✌

[@KushagraGuptaMusic]

Bhai agar sirf 3 ir sensor use kre toh resistor ki value change hogi?

[@zion382]

Sir. That link you have provided for Arduino is not working. Please resend the link which is working

[@electro_king_official]

Contact me here [e-mail]

[@tayyababbasi3785]

how it works on cloud please explain.

[@chandanmishra8211]

Can u explain the ckt diagram i want to do it first on proteus also can i do it in proteus or not also the code part

[@electro_king_official]

Circuit diagram is very simple, once you open it you will understand how the connection is dne

[@khaledbendaoud7664]

can you send to me simulation in Proteus

[@uniquetechunter9419]

I can't download the code can u help me

[@AK-uq9hz]

Why are you using both analogWrite and DigitalWrite in your code in every if statement ?

[@AK-uq9hz]

Can someone reply I have a simulation in 2 days

[@rizalrawk3870]

can you do if with gsm ? sim900A?

[@hirdeshkumar6648]

Sir Please give the circuit diagram because it is not available in your given link.

[@indranilbarman895]

Love you man..

[@electro_king_official]

thank you soo much dear

[@alexjung40909]

Your website seems to be not working

[@alfalahenglishschoolghatko9434]

Thanks

[@electro_king_official]

Your welcome

[@alfalahenglishschoolghatko9434]

Where to put positive and negative leg of led

[@electro_king_official]

Positive the longer 1 will go to digital pin of arduino and negative the shorter 1 will go to gnd

[@104-pranavshetty3]

Bro which software to use

[@electro_king_official]

arduino ide

[@aneeshkonduri5453]

is the explanation of the code available plss respond

[@electro_king_official]

no

[@shivverma1459]

Same code for doing on cloud?

[@electro_king_official]

No

[@artheesonm559]

link in description is not working

[@abhilashsudipaka4571]

Code not working bro errors occurs Analog pins bro

[@vikasgupta293]

and how i can instaall ur codes in arduino

[@electro_king_official]

hi just download the code from the link in the description and upload it on your arduino

[@rahulkolisto7765]

Sir please provide me your code which have you used in 5 IR sensors

[@electro_king_official]

link is in the description

[@chandanimourya2606]

I can't find any ckt please help me

[@aishwaryabhandare4363]

Sir I want flowchart of this project.. plz help

[@104-pranavshetty3]

Which programming Language

[@electro_king_official]

some statements from c and c++

[@shivverma1459]

says cant recognize com12 port

[@electro_king_official]

This is my email address [e-mail] Send the the image of the error

[@rafaelbbl8298]

Can you gave me a schematic and block diagram for educational purposes only thank you in advance❤

[@electro_king_official]

@Rafael Babael link is in the description you can download it from their if you need any help you can contact me here [e-mail]

[@nitinforu4650]

@@electro_king_official have u report on this project.

[@hirdeshkumar6648]

Sir Your project is not working

[@lakshmivishnavi8176]

Arduino IDE download link please

[@resistance7326]

Not working

[@ayshakadiri8474]

Ur code file is not opening

[@electro_king_official]

Web page is not opening or after downloading the file is not opening ?

[@AK-uq9hz]

@@electro_king_official after downloading there is no app which opens the file

[@electro_king_official]

@@AK-uq9hz yes you need to download Arduino IDE to open the code

[@sazzadhossainshazu2716]

It Shows Error

[@fadelzizi3579]

Can you explain to me the simulation of this project in isis?

[@electro_king_official]

whats isis ?

[@electro_king_official]

link is in the description download it from their

[@sazzadhossainshazu2716]

Arduino: 1.8.11 Hourly Build 2019/10/22 10:16 (Windows 7), Board: "Arduino/Genuino Uno" Sketch uses 2928 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 188 bytes (9%) of dynamic memory, leaving 1860 bytes for local variables. Maximum is 2048 bytes. An error occurred while uploading the sketch avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x8f avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x8f This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

[@shreetejakulkarni8826]

Code for 4 sensors

[@santhoshn1487]

It's not working can u please help

[@electro_king_official]

What problem you are facing

[@santhoshn1487]

I have done the connection,runned the program also not working ,sensors not working

[@electro_king_official]

@@santhoshn1487 Contact me here [e-mail]