Arduplane Autoland basics (how to use DO_LAND

Arduplane Autoland basics (how to use DO_LAND_START)

Рет қаралды 6,286

Күн бұрын

Huge thanks to Ben for helping with these videos! You can visit 3DXR here: www.3dxr.co.uk/
This is one of three videos on this topic:
LIDAR setup: • Arduplane Autolanding ...
Basic Autoland setup: • Arduplane Autoland bas... (this video)
Autoland with LIDAR: • Arduplane Autolanding ...
Thank you for taking the time to watch the video. You can find me on social media at
• / painless360
• / painless360
• www.thingivers...
You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• / painless360
• paypal.me/pain....
Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.
Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.
Please LIKE and SUBSCRIBE and above all - Happy Flying!
#drone #painless360 #review

Пікірлер: 27

@jamesemery1 8 ай бұрын

I've probably done over a 1000 manual landings ( not including crashes) and I'm very proud of the effort and patience required to become proficient at landing manually. ardupilot (with a pitot and lidar) makes my landings look like terrible, like I have done no practice whatsoever. The only type of landing that I can perform "better" than ardupilot is a very short landing area and stall the plane about 2 foot of the ground after bleeding enough speed during approach. if i did more research into the settings ardupilot could probably do STOL better than me. brilliant video as always

@Painless360 8 ай бұрын

Ardupilot automated landing, when setup correctly, is a thing of beauty. But, it takes a lot of tweaking to get it to the level of an experienced pilot. You'll see some of the 'fun' in the final video in the mini-series.. Stay tuned!

@jamesemery1 8 ай бұрын

@@Painless360 I had quite a few bum twitchy moments in getting set up properly but it was well worth the effort. The best reaction I got I was flying at a local event (community event not a rc club event) and with a home made foam biplane and the landing was uphill with a cross wind and ardupilot brought in down flawlessly. The president of the local rc club commented saying it was a very good landing considering conditions and was shocked and amazed when I told him it was an auto landing. I put the plane back in the air and started the landing sequence and put the trans down on the table within reach in case of a problem and it landed perfectly. only positive interaction i've had with a local rc club regarding flight controllers etc.

@AerialWaviator 8 ай бұрын

A nice Arduplane series. Thank you Ben and Lee for sharing these insights. ♥👍👍

@RubyS.1 8 ай бұрын

Ardupilot has excellent documentation. But Ben adds all the little bits. Very helpful

@MCsCreations 8 ай бұрын

Thanks for all the info, Lee and Ben! 😊 Stay safe there with your family! 🖖😊

@121sim 8 ай бұрын

Thanks! Perfect timing, as I am getting closer to finishing my first arduplane (w/ LIDAR).

@hieuspirit 8 ай бұрын

Very good attempt. Pls keep releasing new episodes

@jurijmonzon 3 ай бұрын

Great video as usual Lee. Do you think you can make a more in-depth video with the usual fixed wing tuning routine - autotune(worth mentioning SMAX parameter here), then log analysis and manual adjustment of PID parameters to get the best tune? Cheers.

@Painless360 3 ай бұрын

Thanks for the idea, I'll add it to the list! Happy flying

@FlyByWireC 8 ай бұрын

Thank you! Very useful Infomation

@GMastrob1 Ай бұрын

Question here. Great video. Thank you. I usually do not set up missions, I just use for RTL and stability functions. One thing I am confused on. Does the mission get deleted after cycling power on the flight controller? I made the land mission and wrote it to the flight controller. However, after I disconnected the flight controller and reconnected, the mission is gone. I also save it to my computer so I am assuming each time you get your plane ready to fly you must re-write the mission? Thanks!

@Painless360 Ай бұрын

Check out my video on setting up missions. They stay in the flight controller even after a power cycle... Happy flying

@johnchandler4565 8 ай бұрын

Very impressive.

@mikecicero59 8 ай бұрын

Thanks for the info

@techworldcob 5 ай бұрын

I have used hobbywing 40 amp esc in rcplane during autoland the reverse thrust is not working and the motor is beeping after landing. If anyone knows about this please let me know