Are CHEAP Brushless TEMU Electronics REALLY WORTH IT?

In today's video we find out if CHEAP Brushless Electronics are really worth it. Thanks to Temu, we have two systems to test and see how they ACTUALLY perform!
Search code dmm3234 on temu app for up to 90% off!
Or click the link to claim $100 coupon bundle for all users : temu.to/m/uzys5t65v1d
60A Brushless RC ESC 2-3S Waterproof Electric Speed Controller $26.99💰
temu.to/m/u198stvx9th
Brushless Motor 3.175mm Shaft With Upgrade 60A ESC Electric Speed Controller Combo Set $42.49💰 temu.to/m/unrwlont9li

[@Rek_Rc]

Search code dmm3234 on temu app for up to 90% off! Or click the link to claim $100 coupon bundle for all users : temu.to/m/uzys5t65v1d

[@PERTHWESTOZRC]

I've come across these brushless systems while browsing on Temu. They both seem to perform decent for the low price. Those F540 motors are really just a 2845 can with some cooling fins to give it that impression of 540 size, while that other motor you had is a proper 3650/540 size. Cheers for sharing bro 👍

[@MissMuffin-qc8fc]

They are good when you need the rpm without the torque of a 3650 4 pole.

[@Rek_Rc]

Yeah the one with the fins isn't really a 540 size, which surprised me when it ran the slash up to 57 MPH actually. It was hot but it was also overgeared for the KV so that's forgivable. But yes, overall, for the cost they absolutely performed as described and a bit better than I was expecting. Apparently they are programmable as well, though I haven't tried it yet.

[@Rek_Rc]

I agree, the torque wasn't really there, but the speed sure was. The proper 540 sized can had a bit more than the other in torque though.

[@TheUnknown714]

First... the hairstyle got you looking like a 90's villain from a Jean Claude Van Damme movie. Second that was an epic run.

[@jagergerg9771]

😂😂😂 He deff does

[@Rek_Rc]

I've been called Terry Silver a time or two hahaha

[@jazzyjair]

You just new to program your ESC and turn off the drag brake, that will correct your instant brake when letting off the throttle.

[@rcbeast101]

That was epic. Awesome buy . Awesome channel. Thanks for sharing.

[@Rek_Rc]

I really appreciate that, thank you! For the price, the systems performed well. They got a bit hot, but I was running them over geared so it's forgivable

[@OpaMando]

I picked up one of those esc's off of Amazon to either upgrade my HBX 2997A or gorgon. I was hoping it was not junk, at least from your experience it seems decent. The fireteam is such an epic rc. I got one when arrma had them on sale for $400. It is a tank and just so fun to drive.

[@Rek_Rc]

So far these ones are holding up for me. We'll see how long though.

[@IowaBudgetRCBashers]

The cheap brushless system motors are all great. Some of the esc’s aren’t great but this looks like a solid setup

[@Rek_Rc]

Yep, so far so good. We'll see how long they last

[@rcplaytime]

those systems seem ok 👍 excellent test and brilliant ripping 👍👍👍😎

[@Rek_Rc]

Thank you! For the price I really can't complain. They performed well and pushed two big name full bodied RC trucks to impressive speeds in the heat and didn't seem to be all that bothered being over geared.

[@valtycun879]

I got this same kit from the jungle site. The green version and i put in in a wl buggy with stock gearing and with the built in fan it does stay cool and with running various 2s 100c packs it runs all day no issue. Than I put ten 3s 100c packs through it and the esc burnt out on the 10th pack. I did put a fan on the motor and the motor is fine. For only $50 and it being from the jungle site and only having it for about 2 weeks. I was able to return on the esc and get credit towards more parts!

[@Rek_Rc]

So far it's holding up for me. But time will tell.

[@RcPlayer-tt2vw]

Ya I learned you have use less volts than esc rated for longevity and cheaper escs it’s more imperative, anouther fan on esc you maybe got ten more packs

[@MustangsCanTurnToo]

I would only use temu on an old cellphone with no data on it. Anyway, fun test! These combos are generally excellent fun.

[@Rek_Rc]

Hahahaha. I appreciate you watching and the comment buddy!

[@Rek_Rc]

I was a bit worried about data collection as well

[@thechurchofsupersampling]

Thank you for giving me the confidence that when my hair is back in a ponytail, there will be others trying to pull it off with a way worse hair line 😂😂😂

[@Rek_Rc]

You must be very popular. Well done

[@RCRoads]

You really cant buy much for $40 now days. I'm actually in the market for a new motor and ESC for a 1/12 scale and this is perfect. The nice case it comes with would be perfect for protecting my action cam in transport. Is there a program button on either ESC? The fan cover looks like it might be aluminum but even if it's plastic the design looks better than the spectrum fan guard that bends real easy and impedes the fans operation. Very enjoyable video by the way. 👍👍

[@Rek_Rc]

For anything 1/12 scale they would be ideal. I'd actually recommend the motor with the fins for that size rx. It's not a proper 540 sized motor, but the RPM's were certainly there.

[@GrandPitoVic]

I just bought a 20t motor and brushed ESC from TEMU. For like $20 shipped. I havnt had time to assym it yet.

[@joseywilds3133]

Better you than me! 😂

[@enricomiceli5517]

Those motor are amazing and durable , i higly suggest to invest in high quality not offbrand esc.. u will end up spend double to get a decent one..

[@kashmurray1199]

Yeah, not bad at all. Really a neat place y'all have to run at.

[@Rek_Rc]

That park is very RC friendly so far. It also has great nature features for bashing, going fast, catching air, and racing. Pretty much everything is doable there.

[@justinfraziet6843]

Like you channel Bro! So i was just thinking... can you not put fans on slash motors? Because of the why the motor is mounted?

[@AVERAGEJOERC]

Dude u should try tho losi tenacity sct if u like scts

[@Rek_Rc]

Oh, that's going to happen. I've always heard losi Short Course trucks are fantastic.

[@johnellefa]

​@@Rek_Rc Try the Tekno SC410 as well and have a big 4wd SCT smash off

[@t3floz]

I’ve been thinking of buying a gorgon and make it brushless. Would you recommend to buy a esc+motor from Temu if I can find the right size and kv etc? So much cheaper than from other placea

[@Rek_Rc]

Funny you'd say that. I plan on putting one in my gorgon too

[@AVERAGEJOERC]

What about that drag break thing? Do they have a program card?

[@Rek_Rc]

Yes, I forgot to mention there are program cards available for them. The other ESC on the Traxxas was set perfectly.

[@MissMuffin-qc8fc]

They getting warm because 3660 is the appropiate size for this weight and size vehicle. I'd look between 3300 and 3500kv on 3S max. Otherwise you snapping axles left and right all the time on traxxas 2wd. My slash 2wd runs 3660 3300kv on 3S and 36/16 Mod 1 conversion. Imo jato 36t spur and any mod 1 pinion between 14 and 17T for offroad use.

[@Rek_Rc]

I have certainly been through some axles myself.

[@MissMuffin-qc8fc]

@@Rek_Rc MIP X Duty axles for permanent solution, though the traxxas heavy duty axles work well enough for me.

[@GrandPitoVic]

Pretty much, Temu is just cutting out the 20 middle men and the cost is way lower. Basically just missing the stickers the big companies put on them.

[@77seriouspaul]

Are they 5mm shafts on the motors?

[@Rek_Rc]

No those ones were 3mm. 5 mm shaft motor might be a bit much for a 60A ESC at those RPM.

[@BriansRCStuff]

Hey man, have you been getting my emails? No big deal but I sent you two in the past month or so and didn’t hear back. 👍

[@Rek_Rc]

I got one this morning but I was heading to work. I'm not sure I got the earlier one though but I'll go through and get back to you tonight buddy

[@JamesDirtRC]

I am New. Do you need a Gyro on fast vehicles like this ? I need to get the wife a speedy basher or trophy truck.

[@Rek_Rc]

For a car with a small wheelbase, a gyro helps them big time when going fast. With larger scale cars, especially ones low to the ground, it's not necessarily needed, but can be helpful. Most of the time I don't actually run a gyro, but from time to time I will, especially on dirt.

[@JamesDirtRC]

@@Rek_Rc OK Awesome. Thank you so Much. I seen them on Drift cars before is why ask. I love those Trophy trucks.

[@jeremybennett5547]

The real Q is how they managed to make that for only $40

[@Rek_Rc]

No idea, but very good question.

[@kuraisato3139]

If everyone only knew the truth behind name brands 😐

[@Rek_Rc]

What? That's there's really no such thing and It's mostly all the same manufacturers for multiple name brands? We do know that, we just actively forget.

[@GrandPitoVic]

The bad thing is these cheap Chinese items ate killing American companies.

[@Rek_Rc]

Well that may be. But even Traxxas parts are made in China. It almost doesn't matter what you buy or who you buy it from, somewhere, somehow down the line, China gets paid. But that's capitalism. China capitalized manufacturing, and all our big corporations that we rely on and say we love so much pays them to do it. If Traxxas doesn't mind paying China for parts, I guess I don't either. Traxxas and Arrma pay them much more than I do though. I mean, you could always just make the stuff yourself right? Or can you? You can't buy anything without China getting paid, but guess what, we still get paid too. Again, that's capitalism, it's great when you're the one winning isn't it?

[@GrandPitoVic]

@Rek_Rc If it isn't China, It's Taiwan lol. Or Mexico. Or Or Or.

[@GrandPitoVic]

@@Rek_Rc I know I buy them as well. I know how it goes.

[@Rek_Rc]

@@GrandPitoVic I don't necessarily like it. But I understand it. It's just how capitalism works. Sometimes you're riding the bull, sometimes you're getting trampled by it. It's also why I never worry about the USA and China ever going to war though, both countries absolutely depend on each other to stay afloat. They need our business, and we need their manufacturing. In a way, it ensures no conflicts get out of hand, and also forces partnership.

[@GrandPitoVic]

@Rek_Rc Brother, I'f that is not the best way I have ever heard it,?!!!!! That is the truth in so many ways. We'll said. We'll said.

[@scottykardos]

You look really sweet.............and i'm not gay......hahahaha

[@Rek_Rc]

Hahahaha, I appreciate that. I'll take the compliment

[@figuresix]

Curse your video, they are all sold out now.

[@Rek_Rc]

Hahaha oh no. I hope it wasn't because of our video

[@justinkelch4837]

You really love crappy china products?

[@Rek_Rc]

Not necessarily. I like things that work well for low cost. Not all that concerned where it comes from. If you make one as good or better for the same or less money. Let me know, I'll pick one up.