Are THESE The BEST AFFORDABLE Sim Racing Pedals?!

[@ramendino_]

only a few seconds into the vid but i cant get over how good your videography is, its genuinely better than 90% of youtubers with 1m+ subscribers out there, also here before the guy that says "claim your early ticket here"

[@OCRacing]

Haha I appreciate it 🙏

[@wwjnz9263]

O.C. is a master in Presentation.

[@alyxpeotone]

His production quality got so good within just the past few months, its crazy

[@ramendino_]

@@alyxpeotone i dare to say hes getting to ltt level

[@EdvinDzafcic]

Looking good kid 😉 see told ya super star

[@Izarious]

By the way, the clutch and accelerator both use 20kg load cells, not hall effect like you said in the video. Otherwise, great video i have them myself 👍

[@philmarsden9594]

i laughed when he said this as he showed the cells on screen as he did xD

[@GregoryShtevensh]

He always gets stuff wrong lately. Torque figures, HW used.. Not good enough

[@cpanic1153]

Really? I have all 3 and thought only the brake was a load cell. What’s the point of a load cell on a gas pedal?

[@sebitria3673]

@@cpanic1153 If you look closely at the pedals, you can see the load cell on the accelerator pedal. This is activated by a small spring. Why it is done this way is quite simple. The load cell signal is very easy to process and the controller can be built very easily and cheaply.

[@cpanic1153]

Ive been using these for about 6 months now (sliver version) and been super happy. Here are a few things I’ve learned. Tighten all of the bolts and screws, really tight. Make sure they are mounted very securely. Mine came loose a couple of times until I added more bolts holding them down. The dampers are a waste of money. After a few months both of mine have lost whatever gas or oil was in them. Don’t bother or buy better ones. Use the stiffest polymers and springs. The rest are garbage.

[@zeroax1s]

The latest version of this design is the simjack UT. It has some tweaks and improved stability

[@LorenzoClara97]

Like the bushing on the brake? The simruito are the same?

[@LorenzoClara97]

On black Friday they was 160 € for 3 pedals with pedal plate and raise

[@AutoTigeR]

I've been using these Pedals for a few months, and overall have been very satisfied with them. The only negative point I have with them is that I need to re-calibrate them once in a while, after plugging them back into my PC, but that only takes a few seconds with the provided software. I love the adjustability, as it allowed to really hone in the feel of the brake and throttle to my liking. Overall a very nice experience for sometimes

[@eliwatchdarkmode]

Does that happens only when unplugging?

[@AutoTigeR]

​@@eliwatchdarkmode It has happened a few times, sporadically. Mostly it is fine when I plug them back in, but sometimes the maximum input is set wrong (Even though it was fine when I unplugged them).

[@enzob95]

Never clicked so fast on a video. FInally! Finally someone actually talks about the black finish as I couldn't find any reliable review on that aspect. I think I'll skip the black version and maybe go for the Simjack UT instead (I prefer the look of that gas pedal).

[@mikelvn5410]

I have the pedals for a few months. I am very picky and they are worth the money. No issues

[@clunkclunk2099]

Perfect timing. I literally just received these last night. Probably won’t be able till put them together until tomorrow.

[@frederikgaunoe8867]

Oscar thank you I have been asking you for a review in ages. Thanks for another quality review keep doing what you do. Will always support you👍

[@wwjnz9263]

If I were to get a set... I'd go with the metallic finish. When the paint rubs away, you'd see the bare metal anyways so, might as well go with the bare look to begin with. Also, with a 200kg loadcell, I can forgo all elastomers and use nothing but washers. Second stage gang 4 lyfe!

[@zert0x_00]

Would be great to see a vid of u comparing these with the simjack ut pedals😊

[@seideinkingbymarcelmooshei5147]

Was about to say that too

[@zeroax1s]

Borderline the same thing but the UT have more stability to the actual structure. The older designs could bend in some areas over time. The UT fixes that

[@philmarsden9594]

same pedals but the sj ut has "better" brakes if you like it stiffer. that's the only update to them. only the lightest setups were used in this video so their "better" would be debatable.

[@thatguy0023]

Love to see you come such a long way this is amazing keep the content up

[@OCRacing]

Thank you for the support 🙏🙏

[@Arvidje]

i bought these 3 pedals with damper for around 175 eur.. they als come with 3 springs.. awesome deals now..

[@flubzorgaming]

And now we got the simsonn pro PLUS pedals, can you still follow? I bet in a month the simsonn pro PLUS Ultimate Max is coming too. That aside, they are an amazing set of pedals and your video is super nice to watch. Good work!

[@fusion5486]

of course another banger of a vid, keep it up bro, remember, 1 mil isn't that far, you've gained the traction you need 😉

[@OCRacing]

You already know 😉

[@AyaxRo]

Would be nice to see these against the SIMJACK UT.

[@Torqxracing]

You definitely have the "it" factor for KZbin! Please keep uploading!

[@hamba.r6575]

bought it from aliexpress back in march this year for $140, 3 pedals, silver and no dampeners. built like a tank

[@miklos182]

love the review! and honestly, living in venezuela, you get me really interested on them...

[@dragon2knight]

From what I'm seeing here, they offer a ton of adjustments that, IMHO, would work better for folks who have lots of experience with setting good load cell pedals up....but it would be VERY confusing for folks who do not have said knowledge ahead of time. In other words, the folks looking to save a ton of cash on these might actually regret it if they don't have the aforementioned experience getting them to work well. Rock meet hard place. I personally am amateur to a fault, I don't want to get to a pro level, I just wanna race. I have lower mid level equipment that I'll never push hard, and I'm not thinking of ever upgrading it. Although these are low cost, I'd pass on them as they'd be overkill for my level of experience, in fact I'd probably end up hating them because I'd have zero clue on how to set them up properly to get the most out of them. If they get good software and someone out there can make a proper set up guide for them, than maybe, otherwise hard pass from me. Great review as always Oscar, your editing skills are absolutely the best!

[@Yeyeyeyesye]

Lovely video once again👌

[@NoParking.]

I used to have a pair of the Simsonn pedals. The accelerator and clutch were fine but the brake was stuck at 35% or did not work at all half the time.

[@JubbLaRacing]

Did you calibrate them?

[@NoParking.]

Yes

[@NoParking.]

Many different times

[@JubbLaRacing]

@@NoParking. Did you use FreeJoy?

[@GrilledPixeIs]

​@@NoParking.Use the ground wire on the control box iy may be interfering with other gear

[@salashka0102]

one of the best natural body builders

[@YGB7726]

from what i heard from this review and remember from the Lc100 review they sound quite similar with the sharp edges and made w/ steel and what not. correct me if i’m wrong.

[@YGB7726]

these pedals looks very clean and nice though.

[@OCRacing]

They are very very similar. Both a good pedal set 👍

[@GoolySernod]

Any news on what's going to happen to fanatec? I was interested in their stuff as a new sim-racer, but the whole bankruptcy thing is making me wonder if I should look into another brand like Moza for example

[@josephlauer8980]

from what i have been seeing and hearing Fanatec is still a good option for the most part. they have been doing a lot better with getting orders out quickly and continue operating normally

[@cpanic1153]

They were bought out by Corsair. It’ll only get better from here.

[@SpedWardd]

Do you preffer the LC100s or the SIMSONN PRO loadcell pedals?

[@brundle_fly5123]

I have been eyeballing these since I started racing. One question... How tall are the pedals without the heel rest? Is it needed, or is it for people with tiny feet?

[@ppkpahmad7426]

this pedal designed for inverted installation. you can request some modification before purchasing.

[@frederikgaunoe8867]

What modifikations can you ask for?

[@sheep7255]

could you make a video about brake float?(unofficial term I made up on the spot) What it entails is, even though load cells are accurate and all, the reading on the pc actually goes down even though the pressure from the foot does not? From a video I've seen, using springs over rubber blocks seems to completely mitigate the issue

[@johnjones276]

Just ordered 3 days ago 🎉.

[@ILoveMyMazda]

I have looked up these pedals and realized, there are 2 different versions: the p3 and p3-h3... now im wondering what the difference between them is

[@hengmesa]

P3 without gas spring and P3-H3 come with 3 gas spring.

[@ILoveMyMazda]

@majorgeneral5935 i`ll take that into consideration, thank you😁

[@cpanic1153]

Don’t bother with the gas springs. They leak completely after a few months of use and are useless.

[@TwiceFTW]

I have Fanatec v3 with brake performance kit Should i buy these pedals?? Amazing vid Btw!

[@OCRacing]

Probably not, I would say they’re comparable

[@Reyze_]

@@OCRacingwhat is considerable an upgrade given these are in the range of Fanatec V3s and TLCM?

[@usleadershipareliars]

​​​Simgrade vx pro, Simlab Xp1, VRS, Venym, VNM, conspit, Mecca, SimForge, Simagic ​@@Reyze_

[@TwiceFTW]

@@OCRacing Thankyou!

[@Jerome-v2h]

Can you do a review over the F-GT Elite Wheelbase edition? im looking at getting one and im not sure about it.

[@cedced2361]

Could you release the whole chart as it would be interesting?

[@calebcoyle532]

So is the 200 dollar rodless version, whats the difference? Will it perform significantly worse?

[@lighnr]

where can you get this seperatly without the bundle?

[@falapomx]

Really good review! Would this be a good upgrade if I own the t lcms with elastomers?

[@THESHADOW97139]

Yes .... or SimJack UT

[@falapomx]

Thanks! ​@@THESHADOW97139

[@siebebaelen5872]

How would you compare these to the cammus lc100? And which one would you recommend?

[@JubbLaRacing]

These are better

[@cpanic1153]

Cammus is an awful company. Avoid like the plague

[@single_cam9199]

Off topic from vid but, can you purchase bigger shakers for the club sport v3’s ???????

[@edcadlick2650]

I like the pedals Oscar, I have some Simpson racing boots as well,😉 have a good weekend👊🥓🍻🇨🇦👍

[@OCRacing]

Didn’t know they made those!

[@cpanic1153]

@@OCRacingthey don’t. He’s probably referring to Simpson who does make sim racing shoes.

[@justyouraveragepeiceoftoas1988]

yo i would like to know how they compare to the Moza's Srp pedals i just bought them and your vid came out (im crying) i already are in the Moza ecosystem (r5 bundle) Thanks!

[@kevinbrown3593]

How have I just heard of these pedals now . I've been interested in SIM racing for about 5yr and I've just saw these.i think this is the problem I find with SIM gear it's not the best advertised.

[@vroomvroom248]

These or cammus lc100's?

[@OCRacing]

They’re very compatible tbh so I would go with whichever you can get for less.

[@vroomvroom248]

Ok thank you

[@Makkaraperuna555]

A

[@Ahmad-qj6ij]

Are these compatible with the Logitech g923 wheel?

[@cpanic1153]

They are stand alone PC only. Wheel has nothing to do with them working.

[@ANameHere37]

I think imma buy these

[@hueitor1748]

When OC Racing says affordable, but I live in Brazil: 💀

[@KristijanFunkyBass]

These or CSL Elite V2?

[@TheSaffaf29]

Will this work with Moza?

[@JaggedMedal]

They’re usb

[@OCRacing]

On PC, yes

[@TheSaffaf29]

@@OCRacing Thanks for the quick response, Did a Moza Survey and wrote you are my favorite racing sim youtuber! ^_^

[@jakestimson3451]

Kinda feel like i gotta get these

[@Dummi-xr5io]

You gon finish that?

[@Mach6Racing]

you tryna sell that pedal set

[@mukabout4243]

Hmmm Simpson aye? 🤔

[@thump3r]

How you are using those soft ass elastomers is past me.

[@Leonardchodyra747]

Is it playstation compatibile?

[@YGB7726]

don’t think so

[@OCRacing]

Not console compatible unfortunately

[@Xd_Gaming-yn5oh]

Ar all these wheels and pedals comparable

[@firestarter4247]

1 min intro --> "Let's get right into the review" --> ad

[@20max111]

Very nice

[@elichouinard3850]

these are white labeled simjack pros. with some accessories.

[@TheElement911]

Should’ve start the video by talking about compatibility so console gamers don’t waste their time.

[@ZBLDrawing]

bruh.. why are you using the white elastomers. It's hardly a load cell with how weak those are, might as well use some logitech ones

[@9bawi]

can you make a video on a sim racing setup for $200 budget

[@Lesparta]

How does this compare to Fanatec CSL Pedals LC and Moza SRP? Looking to retire the G29 and upgrade to a better pedal and wheelbase. Maybe switch to a used belt driven base like Fanatec CSW/CSL Elite or TM T300.

[@thatpolishguyfromdenmark4988]

me looking at the ''budget'' in budget sim racing stuff -_-

[@TechComplexity]

is he actually bad at sim racing or is he only good at acc and trash at iracing. Well he is definitely 10x better than me

[@thuglife2791]

heusinkveld clones

[@1Zach1]

W Video

[@Infedelle]

on the long term will they load?

[@jessisagamer3929]

Before a hour

[@OCRacing]

Earlier than me!

[@GregoryShtevensh]

Mate, I love your channel. But you need to stop putting out misinformation. Torque figures, HW used etc. Last video I watched you gave incorrect information on torque on a few different wheelbases. And then today you claimed the pedals use sensors that they don't. Important you get this stuff correct

[@Pikahellogo]

Can you do a give away?

[@maximous-prime]

200!? That my whole cost of my setup

[@wwjnz9263]

Looking for a set of pedals around the 250 - 400 mark, and these as well as the SimJack UT pedals are now on my list.

[@mr.amircanguy1737]

hey man, so i have a setup in mind but im financially struggling, would it be posible for you to reach and send me the money

[@crykiddalt]

2nd

[@NewbieRacer]

Nelchan was first

[@crykiddalt]

@@NewbieRacer oh it said 0 comments when I commented

[@NewbieRacer]

@@crykiddalt yeah, the time when you got to the video, it was 0 comments, but while you were commenting, someone already made the comment. I wish youtube had a live feed for comments.

[@crykiddalt]

@@NewbieRacer yeah same

[@nelchan2421]