I like the “deliberate” magazine release of my Delta M model. I have accidentally released the mag on my CZ P 10s once. I find the M model to be the perfect size for conceal carry. Thin, light, can get a full grip and shoots wonderful. Just added a Holosun 407k green dot but haven’t had a chance to shoot with it.
@brandonl59783 жыл бұрын
I have the L and love it. Still breaking it in, but I have had no failures in a more than 300rds. I’ve seen a lot of comments on the mag release being stiff and requiring a more deliberate push, but I would argue the stiffness is only really present with a full mag. Not sure about anyone else, but I’m not as concerned about dropping a full mag quickly. I have had zero issues, with no significant effort, dropping an empty mag.
@alexp974 Жыл бұрын
Just got my delta 2.0m, I have had problems with pistols in the past accidentally dropping the mags. I personally love the mag buttons on this, for my hands the mag is easy to release intentionally. Grip ergos are similar to the P99/PPQ, fits my hand like a glove but slimmer and lower bore axis than my Walthers.
@Awolf37664 ай бұрын
The delta M is my first AREX pistol, i now own 5, my M has 2500 rounds through it and it runs like a swiss watch, i absolutely love it, PPP Pure Polymer Perfection, will be adding the L and X tactical to my collection soon, AREX ROCKS.
@joegreen57143 жыл бұрын
Beretta, Sig, Grand Power, Styer all have modular/removable assemblies. I want to honorably mention that I think the Ruger sr22 Taurus tx22 and Bersa BP9cc also have removable chassis. You can usually tell by the serial number being recessed into the frame on a separate piece of metal rather than being on a flush metal plate pressed into the polymer. For comparison look at the serial under your trigger guard on your Delta and compare it to a glocks.
@selfreliance10143 жыл бұрын
Beretta APX is modular. Mag release is perfect as is for a carry/ duty gun.
@40calnevadausa473 жыл бұрын
I can't believe I forgot about the Beretta!
@RGL012 ай бұрын
I carry the Delta L with a small backstrap, as well as a S&W M&P9 5” with the small backstrap, and they both point just as naturally as my beloved 1911s.
@thearmzmen3 жыл бұрын
I have the X model and I agree with every point you've made. Mine has had no issues thus far. I like it quite a bit. 👍
@urbantactical1483 жыл бұрын
I just got mine in can’t wait to make a video on it and try it out.
@CHEECHMUN3 жыл бұрын
I just picked up my M from the FFL just now, 3 P.M. July 20, 2021. The problem was the mag release is so recessed, that I had to use my finger nail to get it to release. There will be no problem with the magazine falling out. I will be looking for a magazine button replacement for arex delta 2. Also bought the Holosun 407 X2 series to put on it. Other than the mag release, I say it's Bad Ass!!!
@tubbsalex172 жыл бұрын
Is this a good a gun for a first time buyer like myself ???? I seen one the other day and wanted to some research first and yours helped out a lot as well. Thanks
@loboloco866 Жыл бұрын
Great review, I like it, your comments help a lot. We are all rookies with the exception of Fieldcraft Survival, War Poet Society, Mr. Gunsgear, Irak veteran 8888, Nutnfancy, etc.
@DoomMajster3 жыл бұрын
Another modular systems would be Beretta APX series and Steyr M9 if I'm not mistaken.
@sae1095hc3 жыл бұрын
I like the fact that it requires a deliberate push to pop the mag. If they made a version in 40, I'd buy one. Another one that is.
@darthvaderwilliamson95013 жыл бұрын
Great video for a newbie…..Keep it going my 2A brother……👍🏽👍🏽
@40calnevadausa473 жыл бұрын
Well that settles it. I need a microphone! Sorry about the overall quality here...
@CHEECHMUN3 жыл бұрын
LOL
@cello70233 жыл бұрын
I have the m model in gray shot 60 rounds not a single malfunction of any kind
@Ten_Mil_Will3 жыл бұрын
That is the one I am looking at - grey "M". Glad to hear yours is doing well, so far.
@scottvining47243 жыл бұрын
I just got mine, and I am having a lot of issues with the 17 round magazine ejecting. The 19 round magazine ejects fine, but the 17 round magazine requires a lot of effort to get it out. Anyone else having that problem?
@caleb40152 жыл бұрын
I am. Its near impossible to get a full mag to release.
@v.german11b3 жыл бұрын
That's an awesome functional handgun at a fair affordable price. A win-win.
@jsmith17112 ай бұрын
Savage Arms Stance MC9 has a modular chassis system.
@CHEECHMUN3 жыл бұрын
I would like you to release the mag on mine. It require some pressure to release, like the spring is strong. Maybe some releases are tighter than others.
@survivetheattack2 жыл бұрын
My new "X" model I took home a few days ago had a big problem dropping the included 17rd mag when loaded, with the slide forward. Whether full, or just a few rounds in the mag, it took 30+ Ft-Lbs to drop. I tested my two 19rd mags, which were not as bad, but still not great; far more force than what I can generate with my primary thumb. I had already ordered the extended mag release for it, so I thought it might solve the problem...nope! And as an aside, that was a difficult swap (I have 30 years building guns and doing trigger jobs, including AKs, ARs and P80s)...I would not suggest doing a swap yourself to an extended release unless you have some gunsmithing and tool making skills (you'll need a spring tool, which I made out of a small flathead by using a dremmel cutoff wheel; notching a spring holding divet on the edge of the blade). I definately would suggest upgrading the extended mag button (right or left, not the one that is extended on both sides)...It upgrades the mag function to what most of us USA shooters would consider "normal" size and travel for a mag release. I planned on polishing the top of the mag catch, which interfaces with the mag cut out, and see if that helped the mag drop issue, but decided instead to break in the mags and release with reps. 400+ reps and two hours later, I got the 17rd working reliably. I incrementally added a round, did 30 cycles, added another round, etc, etc. Lots of work, including a blister, but it payed off! Even though I have XL-Wide hands, I settled on the small grip insert...it feels better than my 1911s! Added an RMR; easy install. Fits my Glock 19 holsters, even without a light. I absolutely love everything about this gun!
@R.Koudy.R8 ай бұрын
any video how to do that?
@michaeltammaro4822 жыл бұрын
Replacing the module is as simple as can be. It is the mag release that is incredibly difficult to replace.
@madisaur02 жыл бұрын
Hey brother we can use another update and your .40 video. I know you're likely busy with your work load. Just found you, and am interested in more video's for sure!
@Guntotinfreedomlovin Жыл бұрын
I have the Grey delta x and yea the mag releases much easier when empty for mag changes, but it is a bitch to release with a full or half mag. Not sure why. It's much easier to release the mag if you push on thr bottom of the mag while pressing the release
@adamxiong18172 жыл бұрын
Just letting ya'll know. If you plan on doing the extended mag release replacement, just take out the entire inner assembly. There's very minimum room if you don't. And the entire inner assembly is held on by 2 large pins. That's it. You will save yourself hours of work and frustration. Once you get the stock mag release out, get the pin through the locking plate and spring. And then take your time and set the spring by pushing the bar that's sticking out to the far left with a small flat-tip screwdriver. I just literally wasted 3 hours when I finally stopped being stubborn and it took almost 15 minutes.
@agricola2 жыл бұрын
Arex, sig, beretta and IWI all have modular systems where the FCU is swappable
@demetriusford54083 жыл бұрын
How is the TLR-1 on this gun because I’m thinking about picking this gun up next week.
@tylerhaskiell13383 жыл бұрын
Steyr was the 1st to come out with a modular system. They was going to sue sig over the p320.
@comanche69432 жыл бұрын
Does your mag button wiggle a little when the magazine is fully inserted? No wiggle when mag is out.
@MrDLRu2 жыл бұрын
Yup, watch that video with 2 cops and bad guy with AR pistol. While bad guy is beating down one cop, other cop accidentally drops magazine from his gun...oops. I just wonder if he had a magazine release extension on that.
@az-chris11363 жыл бұрын
Has anyone else noticed the HK VP9-like "feature" where the slide releases from lock-back when inserting a new magazine? whenever I slap a new mag in, the slide goes into battery without me touching the slide release lever similar to the way the VP9 functions. Some call this a malfunction, but others call it a "feature".
@zoeylamant8298 Жыл бұрын
cz p10 models do tht as well
@flyoverkid553 жыл бұрын
What? Wait. How can this be? I've read comments telling me that this pistol is superior to the Sig P 226 [ in spite of it not being adapted by any military units in the North American continent ]. But it has an issue with the mag release? Well.
@Samuel-pu8qs3 жыл бұрын
How did you purchase the grip module straight from Arex? Every time I've tried purchasing it I get a "Sorry our products are not available in your region" popup.
@urbantactical1483 жыл бұрын
Try going through Global Ordnance out of Florida, they are the distributor for Alex.
@40calnevadausa473 жыл бұрын
Weird. I just went to the Arex webstore where I purchased and now I can’t even find the grip module. As far as them not selling to particular regions, I have no idea but I’m in Nevada and didn’t have any issues.
@Samuel-pu8qs3 жыл бұрын
@@40calnevadausa47 yeah I got in contact with them and they told me they stopped any purchases to the United States at this time 😕
@fastlanefugitives68813 жыл бұрын
I just bout mine and the mag release button and it’s terrible, I’ve been trying to buy the extension and every time I put my adress it says “unavailable in your region” would u sell me your magazine release?
@40calnevadausa473 жыл бұрын
How about I just mail it to you free of charge? I’m getting a new email address set up, I’ll let you know what it is and we can arrange to have it shipped to you.
@dumafia3 жыл бұрын
@@40calnevadausa47 if he doesn't take you up on the offer. May I get it?
@swamplight792 жыл бұрын
@@40calnevadausa47 is this gun an "x" with a full-size slide and barrel? Im am confused when looking at it. Thanks.
@paulvega98933 жыл бұрын
Your model X is a model M slide with a model L
@DouglasCampos84 Жыл бұрын
extended mag release btn,.. and be happy!
@Ten_Mil_Will3 жыл бұрын
Ok, kinda funny - I was on vacation, stopped in an LGS (local gun store), saw this sexy "jagged" lookin mofo and was like "ooooh". Full disclosure - I am the "Non Glock" guy. Been issued several, owned several, now I own NONE and only use them if a job makes me. I use a CZ P10c. I also run an M&P 2.0 Compact. I've looked at VP9's, PPQ's. Basically ANYTHING that works like a Glock but ain't one. So I hold this slender, angry lookin fighter and notice the price tag $775. I dry fire it, check the reset and think "ok, guess it makes sense, this shit's on another level, 775 seems high but it SHOULD be more than the others". Then I Google it and find out it is sub 500?!?!?! Now, I'm really looking at em. Side note - for all my "F Glock" rhetoric, I had to buy pistols for my children, pistols they might need to trusts their lives to. The girl got a G48, the boy a Gen 5 G19 MOS. I might not like them (Glocls not my kids) but I know I can count on them.
@gloriamaletta86673 жыл бұрын
I have a black X model for a month shot 200 rounds through it it's very thin feels very good in the hand shoots and has handled well has been accurate and reliable so far l really like it does it have the absolute best magazine release absolutely not but l can honestly say it works for me without any problems would it be a good magazine release for competition no but if you get use to it it's not the end of the world you can eject magazines fine if you train with it would a raised release magazine button be better yes so far mine has been flawless the trigger is very good and has a short reset to me simular to my friends H&K VP9
@vishnupillay3373 Жыл бұрын
Baretta apx
@vishnupillay3373 Жыл бұрын
Iwi masada
@bwasman84092 жыл бұрын
If you are going to make a video and use click bait….talk about the issue from the beginning.
@Ryfij2 жыл бұрын
Iwi Masada
@alpha29572 жыл бұрын
What the F**K? Click Bait. I thought you're going to talk about the mag release problem. I stead you talked about nothing but BS cow manure. 😡😡😡😡
@alpha29572 жыл бұрын
Well, I also wanted the darn magazine to release when I release it, but it wouldn't because the release button is flushed to the gun itself. So, your comment is illiterate and useless. Sorry....💯💯💯👍👍🤣🤣