ArkiADD Vlog 05 How to draw Lot Plan using CAD

How to draw LOT PLAN using AutoCAD
Vlog 04 Manual drafting of Lot Plan - • ArkiADD Vlog 04 How to...
drive.google.c...

[@markkennethlacap27]

Thanks

[@archibalddilanco2404]

Can you teach us po kung pano gumawa ng lot data computation, THANK YOU PO!!!!❤❤❤❤

[@valdenarrokingenria.1467]

Maalam na ako

[@bisayangdrafter]

Thanks sa vlog mu Sir, My bago na namn aku natutunan, Salamat Sir at mabuhay ang mga Draftsman katulad natin..

[@ArkiADD]

Thank you sa pag drop by sa Channel ko. Medyo busy lang ako now kaya hindi ako makapag upload. See you in my next video Bro.

[@romelmannalon268]

Salamat sir, naka limutan ko na mag plot sa auto cad dahil 13 years akong nag ofw at twice lang ako nag plot noon kaya naka limitan ko na. Salamat sa tulong

[@ArkiADD]

Thank you din sir for watching. Don't forget to subscribe po. God bless

[@yitchuckjayme9963]

Good Ito para SA MGa Draftsman katulad ko...

[@cristinomaula3713]

What the meaning ofBLLM? Thank

[@ivannreyocop8017]

pa acess naman po sir sa google drive, for school purposes lang ty ♥️

[@harviebanalnal322]

salamat po sa tip. suggestion ko lang po na pag isolated survey or isang titulo ang ilalagay. dapat po naka base sa center ng papel ung mismong traverse ng survey. at ang scale ay kinocompute po base sa highest an lowest northings/eastings.

[@hansbegonia8540]

direct to the point nung vid tutorial highly appreciated sir, request access for your tagging LSP sir salamat

[@johnsherbertfarinas2791]

Hi sir. It is always best to research the lot data computation available at the land management bureau of denr to be able to correctly determine the proper correction needed for the polygon to close. thank you po.

[@ArkiADD]

Tama po kayo... Thank you Sir John.

[@pggnatasag9511]

Bold continues line po ang lot boundary, dotted line sa mga adjoining, tanggalin ang extra line sa corners.. asan ang grid/long/lat

[@ArkiADD]

Yes sir tama ka! if we are talking of GE drafting standards tama po. The boundary should be bold and continues line. Sya kasi ang main character ng drawing. But in Architecture we normally represents the lot plan or sketch plan as "center line" type of line, because we technically draw the bldg. outline or the bldg. footprints using the continues bold line... para sya ang ma highlight. But nonetheless both are correct its only a matter on how you present your drawing na madaling ma perceive ng magbabasa. Mas preferred ko lang siguro ang ganitong presentation. But itong sinabi mong line works and matter of presentation nakita ko na in some of my GE partners... lalo na ung walang extra line sa corners or muhons. Thanks for sharing

[@alexchiong2663]

Sir. Additional info if technical descriptions stated in title, u need to get a coordinated bearings as per record on file at denr. It has northing and easting of the lot herein, then plot it on autocad for a clearer and definitely approved technical description than the title itself.

[@ArkiADD]

Tama po Sir tukayo Alex. We normally get this in our big lot projects. I mean ung madaming points. Like what we did in our sta. Maria Subd. Project that has 50plus points at madami dun ay may error Ang coordinates. Denr records was a very big help. Lalo na sa mga titles na halos Hindi mabasa ang nakasulat sa kalumaan

[@alexchiong2663]

@@ArkiADD tama po kayo. Minsan po kasi di maiiwasan ang clerical error sa technical description sa titles. Lalo na kung indi maclose ung drawing or may error sa declared area.

[@lhanzchamber1101]

Thankyou somuch arkimate

[@ArkiADD]

Thank you Sir Alhanda

[@shadyb834]

bat nag hahang autocad ko pag gamitin ko yung plugin?

[@deniseaprilminoza1077]

thank you kuya😊😍

[@ArkiADD]

Thank you Denise

[@maureyeslll3676]

san po mkukuha yung plug in

[@engineeringangat4499]

thank u very much.. very helpful ..gb.

[@Ka-DrafterVlog]

Thanks so much for your tutorial sir, very helpful specially sa mga aspiring draftsman. keep safe & God bless.

[@viav.5681]

Thankyou po sa plugin

[@ManzanoGraphicStudio]

Very helpful sir! Hi sir im From CAD operators ph dn

[@ArkiADD]

Thank you, panuodin mo ung isa ko pang video about manual drafting naman ng Lot Plan plotting. God bless

[@rickyflandez277]

sir papaano makapag downdload ng apps para po macheck maitama po ung ploting hindi ko po kc ma iclosed meron po kcng error s thecnical discription

[@dindomendoza2634]

lahat po ba ng auto cad installer ay pwede sa lot plotting

[@ariesserrano3074]

Thank you.

[@ArkiADD]

Thank you for Watching

[@reynan8907]

THANK YOU

[@ArkiADD]

Thank you Reynan

[@acinad4605]

Sir pano po yan maging polygon? Thanks

[@penro-plguzambodelsur1398]

gud day po paano mo ma kuha yung link po

[@mel-od1eh]

thank you so much!!!!

[@ArkiADD]

Hi Melody, thank you din

[@tukmolmixtv6448]

Pwde po mag pagawa ng lot plan magkano po?

[@tog5logistics687]

good day! bossing pahingi ng link sa plugin. TIA! More Power!

[@yanamascual7979]

Thank you so much! Greatly appreciated 👏🏻

[@ArkiADD]

Thanks you din po

[@rudyjacoby8495]

pro trick: you can watch movies on kaldroStream. I've been using them for watching loads of movies recently.

[@wilsondeshawn6847]

@Rudy Jacoby yup, I have been watching on flixzone} for years myself :D

[@jamesodvina24]

bos pahingi po ng link.tnx

[@ArkiADD]

Okay na james

[@user-zo1ug4me2z]

Pwedi po ba maghingi ng link sa plugins mo po Sir ? Hopinh for your response po

[@ArkiADD]

pa check po sa email. Sorry late approval ako... super busy lately. Happy New Year

[@opawOUBOI]

sir, salamat,pwede pa access ng plugins nyo po salamat :)

[@athenapsychelee7803]

Thank you pooo. Kayo po prelim namin HAHAHAHA

[@ArkiADD]

Ganun ba sakto pala... Sana mataas Ang makuha mong grades. thanks sa panunod. Hoping na makagawa ulit ako Ng tutorial video para sa inyo... Medyo busy Lang kasi now sa mga raket. Thank you

[@angelamaesadiasa2799]

thanks sir anlupet

[@bibaylabang]

pano po ba gawin yung technical description table?

[@ArkiADD]

Hi Bibay, e type mo lang Sya as shown in my video. Pero meron Kasing Excel na ginagamit para mas madali mag plot sa cad and I will make a separate video for that. Thanks for watching

[@ashoksingh-fl5up]

galing po!

[@alfredopili2655]

Maraming maraming salamat po Sir, highly appreciated po sa napakalinaw at napakagandang pamamaraan nyo po sa pagbabahagi at pagtuturo ng inyong kaalaman. Ako po si Alfredo Pili 54 years old, taga Sapang, Jaen, Nueva Ecija po, interesadong interesado po akong matuto, ano ano po ba ang kailangan ko as a beginner po, please help me po Sir at mga kabayan po na willing magshare ng kaalaman po. Pandemic po tayo kaya nag-iisip po ako ng ibang mapagkakakitaan ng nasa bahay lang po. Maraming salamat po ng advance Sir. Keep safe and healthy first always po, God bless 🙏💪☝️

[@ArkiADD]

Thank you din po Sir

[@emmanuelsoguilon5931]

Sir patulong po, napupunta po sa ibang direction yong line... Example... s30d15w,napupunta po sa north to west..

[@ArkiADD]

Try mo eto @2

[@ArkiADD]

Ung 2 just replace it with your actual dimension as indicated in the TCT

[@constructionlife6747]

Thanks for this sir.

[@ArkiADD]

Thank you very much

[@clarksadventures3781]

sir pahingi po link please!

[@luismariomaurertv8073]

Hir Sir.. Draftsman po aku.. Nice video.

[@ArkiADD]

Thank you Luis

[@luismariomaurertv8073]

@@ArkiADD pa sub din po sana..

[@gerardocampoto5770]

Next video sir paturo nung pagawa mo ng templates

[@ArkiADD]

Hi Geraldo, cge I will try to include that in my vlog. Ngaun Kasi super busy sa mga projects kaya hindi pa ako makagawa ng new video.

[@geomineengineeringservices1088]

Hello sir, I hope you can grant me the access to the plug in. Thanks!

[@determinate2024]

Hi po! ask ko lang po. Pano mo po masasabi na 1:200 ang need na sscale sa lot po? Medyo naguguluhan lang po kasi ako kasi may naituro sa kin na need i- dist yung lot tas ididivide sa 0.3 para makuha yung scale( like 1:200) saka command properties tas custom scale to 1:200 sa viewport. Ty po sana mapansin nyo po.

[@ArkiADD]

Hi Jammer, Just try the command. SCALE then enter, select the drawings you want to re-scale the hit enter and then right click your mouse then type 1/2 then enter. With that you will able to have 1:200 scale factor. Just try to watch the full vidoe of my LOT PAN drawing using CAD. Nandun din un...

[@arvinaba8860]

hi, alam nyo rin po ba paano e plot yang TD accurately sa google map/earth?

[@stevensonasejo9029]

DI NA PO NAG EEXIST YUNG BINIGAY NIYONG LINK PO

[@ArkiADD]

Hi Venson, Sorry for the late reply, too busy lately. anu email add mo e send ko nalang sayo. TY

[@jaysona7023]

May way poba pag lagay ng technical descriptop sa Cad? yung hindi na po mag tytype isaisa sa table tapos tingin tingin sa titles? thanks po

[@henyongpogi]

sir pano ba ilagay ung TD sa gilid at ung mga nka sulat sa LOT.salamat

[@hubertcruz890]

Boss possible ba na ma plot yung BLLM tie line sa google earth after ma draw sa cad? Thank you sa sagot.

[@ArkiADD]

Hindi Lang ako sure... pero if u were asking my opinion Mahirap Kasi ma determine Ang accuracy Ng BLLM if sa Google map mo kukounin. Malaki tendency na Hindi magtama Bec. Of the scale factor na dapat mag meet

[@hubertcruz890]

ArkiADD thanks again architect! 🥂

[@bernadetteannr.manlapaz7442]

Hi can i have a link po nung sinasabi niyo na plugin? Salamat! Diko po makita dito e. God Bless

[@ArkiADD]

Hi Bernadette, what is your email add. I will sent it to you the plugins. Thanks

[@domsrequino7806]

Sir pano nyo po nahanap yung error sa 2-3 lines.. Thank you

[@ArkiADD]

Actually trial and error sya. Check the area, check the dimension and description then you will have the idea Kung San may mali. But better to ask your local GE Kung medyo Hindi ka kampante sa problem na na encounter mo. Madami naman tayong mababait na kaibigan na GE dyan

[@domsrequino7806]

@@ArkiADD thank you sir sa response..

[@selene3255]

Sir, how do you tag if some part of the lot is curved?

[@ArkiADD]

Hi, As far as I know po wala po talagang coordinate na daretso curve... Ung pag ka curve nya is binubuo pa din Ng series of lines kaya naging curve. U can use the link that I have shared for easy tagging. Thanks

[@zgames7928]

Sir di na po ata nagana ung link para po sa plug in for the bearings

[@ArkiADD]

Hi pls. try to click again the link below. TY

[@madelleinfayezamora9040]

pano po mailagay ung dimensions na may directions sa layout? sorry po, beginner here. salamat

[@acemaglente2424]

ano pong Direction control nyo sir.? North (S) or South (N)

[@ArkiADD]

Hi Ace, what you u mean control? Command ba do you mean? If so nasa video ung mga command key na pwede mong sundan.

[@domsrequino7806]

Kung azimuth direction is south kung bearing nmn is east direction.

[@jucilrosesarpamones3032]

first time ko po ito...pano madownload yung plug in?...tnx po

[@ArkiADD]

Nasa description po ung link. Pwede nyo e download

[@hersheymallowspagatpat3356]

HI sir wala na po yung Link ng ACAD? 😢

[@fudinfo7203]

Good pm sir meron kayung tutorial for vicinity map? At pahingi na rin po ng plugins thank you

[@marklawrencealonde9295]

Sir paano po malaman kung saang point ang mali pra hindi mag overlap?

[@carlajemverdejo200]

pwede po mahingi yung source ng land title? tyy

[@achaiaackerman4200]

Hi po, pa grant po sana ng access dun sa files badly needed po. Salamat po!

[@ArkiADD]

Yes of course. Check your inbox

[@achaiaackerman4200]

@@ArkiADD Thank you so much po, architect!

[@sammieee4297]

hello sir possible po ba na magiging mali po yung mga directions na binibigay ng tag? thank you po

[@rayvinpaulrayo2434]

Sir magandang gabi po, paano po ako magkakaroon ng plug-ins gaya ng ginamit niyo sa video? Hindi ko po kasi makita yung attached file.

[@ArkiADD]

Hi pls. try to click again the link below. TY

[@rayvinpaulrayo2434]

Okay po sir. Maraming salamat po sa pagreply.

[@amarohicom1547]

Draftsman po ako sa Assessor's office, anong link po ng plug in na gamit ninyo po? Sana po maka hingi po ako. Salamat.

[@amarohicom1547]

THANK YOU VERY MUCH SA ACAD APPLICATION FILE

[@bro-vo1cg]

thankyou sir!.paano poh naging "lot 1" ung sa technical description after ng bllm?? di ko kasi makita sa lot description sir paaccept po sir sa request access. salamat po.

[@JADE-hm8qf]

hi sir, thank you for the video. Can i please access the drive, i am currently doing my activity and i badly need to help

[@chelsy2134]

DI NA PO NAGANA YUNG LINK

[@vincecerna14]

Hi sir thanks for the vid. May tanong lang po ako sir. Pano po nyo nalaman na line 2-3 yung error, gamit po ba yung plugin na namention mo sir? at if upon checking is tama na man yung na plot na bearing at distances, pano po yan icocorrect? thank you in advance Edit: nagrequest din po pala ako sa file mo sir. Thank youu

[@aldrinabulencia4096]

pano po pindutin yung @ iba po yung lumalabas

[@ArkiADD]

Hi Aldrin, try to click shift then 2

[@hori9584]

diko ako marunong mag install ng plugin paturo po

[@ArkiADD]

Hi pls. try to click again the link below. TY

[@jairusrufino4912]

sir nanghihingi po access request po sa application link. baka po pwde makahingi salamat po

[@jiftyp]

Ty sir .,., dami ko nagets.. pa request po ng access :) Tanong po: Saan nyo po nakuha yung "Lot 1" sa baba ng LOT No. ? di ko mahanap sa title e.. :(

[@verityxx9784]

good noon, sir. CE student po ako. itatanong ko lang po sir kung saan po pwedeng makahanap ng title lot po na pwedeng gawin po. thank you in advance and more power po sa channel niyo

[@millvcargoden2053]

pano nyu po dinugtong yung line na di dumugtong sir? kasi error e di nagdugtong,di naman pede i close agad kasi maiiba area, bogus yun, paano po ba maayos, di po masyado clear yung ginawa nyong plug in thank you, god bless po

[@ArkiADD]

Hi Mill, to make the explanation short dapat marunong ka mag troubleshoot. Kung first time mo mag plot Ng lot okay lang Yan given na Hindi madali ma absorb ung info. But time come... Magiging madali na sayo determine Kung San ang error. Kahit ako Kasi sa tagal ko Ng nag pa plot may mga lot pa din akong Hindi Mai close so I have a friend GE na ready to rescue Everytime I need his expertise. Ulitin mo Lang ung video ko. I'm sure ma kukuha mo din Kung panu ko ginawa troubleshoting. Re. Naman say plugins it will just make your troubleshooting or tagging easier.

[@ArkiADD]

Thanks for visiting my video

[@ronaldremollena6691]

Sir pwedeng makahingi ng plug in. salamat

[@markangelosalcedo6086]

Bro, question sa Tagging. applicable ba yan sa Autocad 2017? kasi pag nagtag ako, hindi nakakasama yung distance sa nagaappear na tag

[@ArkiADD]

Hi Bro, try mo ung ibang plug-in. May ganyan taga kasi

[@markangelosalcedo6086]

Kasama ba sa mga plug-ins sa link un?

[@ArkiADD]

@@markangelosalcedo6086 oo bro nasa link

[@mitchcontreras3108]

bakit po hindi ko ma enter yung "s68d30'w" nagrred po yung box :(

[@ArkiADD]

Eto po buong command nya: @6811.23

[@ArkiADD]

Kailangan ilagay mo muna ung dimension bago ung coordinates

[@mitchcontreras3108]

@@ArkiADD THANK YOU PO! :)

[@ArkiADD]

@@mitchcontreras3108 gumana ba?

[@ArJoan-fb5hz]

HI! Thanks sa tutorial Arch! I want to get the link for the plugin sana. :)

[@ArkiADD]

Hi Ms. jona, nakuha mo na ba ung file? Hope you have it na. Ty

[@paoloeduardodavid868]

sir pa accept request sa google drive done subscribing na po.

[@marialulette]

hello po, na click ko na ung link pwede po pa accept. thank you!

[@djmugiwara8525]

Sir info ng units plss balibaliktad sakin

[@ArkiADD]

Hi, what do you mean pabaliktad

[@djmugiwara8525]

Ok na po sir.. Sa settings po units.. Surveyor units nalang po ginamit ko then ok... Ok na po sir samat po ng marami Godbless

[@ArkiADD]

Okay, gamitin mo ung plug in na naka share Dito sa video ko na ito.

[@louigiemativo2921]

Sir.pls pa accept ng request ko for access sa google drive pra ma download ko po ang plug in,.thanks sir

[@sandraedana]

Thank you.

[@raingo5625]

May faster way po ba para makapag plot? nasa 600+ points po kasi yung tech description. thank you!

[@bongsul.realtor]

Hi po, pa grant po sana ng access dun sa files badly needed po. Salamat po!

[@raingo5625]

May faster way po ba para makapag plot? nasa 600+ points po kasi yung tech description. thank you!

[@ArkiADD]

Hi, as far a i know kung CAD ang gagamitin mo ganyan po talaga. Kailangan ma i type lahat ng TD para makagenerate at ma recognize ng CAD ung lot profile mo based on the TCT. Ty

[@raingo5625]

@@ArkiADD salamat sir, akala ko pwede ilagay sa table nalang at kusa na magegenerate haha. Simulan ko na. Ty!!

[@benjedelapena8294]

actually may mas madali pa,input your coordinates in ms excell and paste it on line command in autocad

[@ArkiADD]

@@benjedelapena8294 ganun ba sir. Try ko nga yan. Thank you