Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad-essentials-course/
@sevader18472 жыл бұрын
Best explanation and examples I have seen. Thanks a lot! It's finally clear to me.
@archreyona Жыл бұрын
It looks mandatory to annotate to simultaneously adjust while you play around the scale at layout. If you do not use annotative it will appear the object be too big or too small and get into trouble finding right scale setting in layout. Helpful content thank you🙌🏼
@tcsengenharia95698 жыл бұрын
Your explanation was too educational, now I understood - thank you for your time, Engº Thiago from Brzil
@AC3DCad4 жыл бұрын
THANK YOU, you are a lifesaver, the best explanation about annotative objects and scales on youtube
@TheGamecheater1003 жыл бұрын
best tutorial on this subject i ve seen so far
@anthonycarrera48592 жыл бұрын
I'm interested in learning more about autocad, continue the good work Sir...
@mattjohnson7883 жыл бұрын
Good clear introduction. One of the better videos on this subject.
@PeterrAre8 жыл бұрын
thanks , a demo that is clear and gets the point across - I had my text jumping around like a jack in the box so I think I can sort it now!
@sourcecad8 жыл бұрын
Here is a related article too, if you want to know more about annotative property www.thesourcecad.com/understanding-annotation-scale-in-autocad/
@ssurb19553 жыл бұрын
sorry I am learning, Thanks for your efforts. plz tell what is the use and purpose of making annotative and non annotative objects. does it save some efforts to produce a drawing or what for we need to know that much, how does it assist and help our work, what ever you have explained. please explain.
@SCOSMOS0102 жыл бұрын
Else you have to change it manually in dimen style.. Individually
@exthaichhiv984 Жыл бұрын
Thank you so much !!! I almost went crazy before your video
@martinargimon730 Жыл бұрын
simple and an excellent explanation
@anitanorambuena2 ай бұрын
amazing explanation
@johncarroll69107 жыл бұрын
Good job demonstrating the difference. Thank you.
@vijay64424 жыл бұрын
Thank you very useful. So mostly every drawing we need do use annotative scale it's good for scale changes and other purpose.
@maheshdanak81452 жыл бұрын
Very good explanation. Thanks
@SleepySetzer3 жыл бұрын
clear and concise!! Good Job!
@ankitgcg4 жыл бұрын
Please share different scale drawing like 1:150, 1:125, 1:1000 and same plot in layout a0 size
@davestewart96054 жыл бұрын
At last I understand it! Many thanks.
@vijay64424 жыл бұрын
Annotative mostly use for scale changes or any other purpose also. If other purpose please let me my comments. Thank you sir.
@robinlume9523 Жыл бұрын
Hello... I am greatful of you... Your tutorials are always clear and precise... I have a question though... I am learning AutoCAD... I had all my dimensions and leaders in annotative... I am finding it hard to have my drawings, in multiple viewports on a paper with different scales... When scaling, all annotative scales on the dimensions and leaders are showing... Help...
@usmanadamu101013 күн бұрын
When should I use annotative and when not to?
@lampjeslichtontwerp4 жыл бұрын
very clear education... thank you !!!!
@sixtyfiveroses29686 жыл бұрын
That was very easy & clear. Thank you!
@errolconliffe19713 жыл бұрын
Using scale factor
@123kkambiz9 жыл бұрын
Thanks for uploading the video, excellent totorial with very good explaination.
@sourcecad9 жыл бұрын
123kkambiz welcome :)
@goutampani19808 жыл бұрын
Thanks for this type of tutorials
@zamabdurajak46827 жыл бұрын
thank you very much this is really helpful...
@janisb13397 жыл бұрын
Thank you for the explanation! Understood!
@cadcentercochin2433 жыл бұрын
Thank you. It was really helpful.🙂❤
@erikisip38433 жыл бұрын
Very informative video thanks for this
@michaelsiu98136 жыл бұрын
Thank you for explaining this very well!
@dkaamraaj2 жыл бұрын
Thankyou for sharing
@KJC.Designer6 жыл бұрын
Thank you sir!, it is very helpful and clear! Good job!
@kandasamyrajan8 жыл бұрын
Excellent explanation. Thank you very much Sir.
@sourcecad8 жыл бұрын
Welcome Rajan
@chrisb39277 жыл бұрын
In model space, when I change the annotation scale, for instance, from 1/8" to 1/2" scale, all the previous dimensions done at 1/8" change to 1/2" scale dimension. How can I change the dimension scales without altering the previously done dimensions? Thank you in advance. Chris
@SCOSMOS0102 жыл бұрын
Change the properties only for the required dimensions. For others make it as dimension style.
@chrisb39272 жыл бұрын
@@SCOSMOS010 Thank you!!!!!!
@digitalskills32748 жыл бұрын
Thnx For That.. We Under stand these Scalling Sir G good..Sir But I have Question is That What is Difference B/w In Annotative And Non Annotative Objects..???
@NadeemAnsari-oh7hz7 жыл бұрын
thanks, during learning it,s a best video
@gabriella8173 Жыл бұрын
Now I'll follow you
@olabodeogedengbe77689 жыл бұрын
Good job! Very helpful.
@sourcecad9 жыл бұрын
+OLABODE OGEDENGBE Thanks Olabode
@mariobolanos44994 жыл бұрын
thank you for the explanation I love it
@allansplace6 жыл бұрын
Very good explanation. Thank you. I do have one question, if you don't mind. I am trying to find a procedure for entering text into a title block. I created an annotative text style (Arial, size 0) and used the 'text' function. AutoCAD asked me at which scale this should be. ... This is where I am confused. As well, when I input the text "LEGEND" into the title block in Model Space, it was absolutely huge, yet in the Paper Space it did not exist. Why did it turn out so large? The text should be .25mm, not half a meter! I wonder if you could please explain this procedure. Thank you again for an excellent video. I am one step closer to getting my title block right.
@jakub_bak6 жыл бұрын
very well explained, thanks :)
@vishnuprakash31877 жыл бұрын
very very helpful. thank you.
@hadooshmk63862 жыл бұрын
Thanks so much
@SOFIANESOFIANE-pe2nfАй бұрын
Thanks 💯💯💯
@jaygobolos55632 жыл бұрын
excellent.
@paulsastroutomo42737 жыл бұрын
thank you for great explanation
@pandianvelu17075 жыл бұрын
i want to know how to match the scale with the drawing when i am setting a scale 1/8''=1' when i took the print out and measure the drawing in the scale 1/8''=1' it is not matching how to solve this
@ShihabdeentheCyclist4 жыл бұрын
Is this convertible entire objects in drawing or dimensions text and hatches also line width
@sealord001ok3 жыл бұрын
thank you verrrrrrry much
@huaquocnguyen74717 жыл бұрын
You're the best
@govindkumarsahu22687 жыл бұрын
sir can make possible spline fit option in detail I feel difficulty very in object method
@cheneeblanchacuzar79387 жыл бұрын
Hi I tried the instructions from your video. The dimension was enlarged but the hatch was still the same with the figure that is not annotative? I was really confused with that.
@hovoasatryan68556 жыл бұрын
Thanks bro for the video, there is a PROBLEM ,, when I set different scales ,,, then they Overlap each other ,,, what can I do ?? Thanks !!!
@lamatoyoda15067 жыл бұрын
thank you.. very good
@SchwanaCARDHUT2 жыл бұрын
Bravo 👏 merci
@strukled85906 жыл бұрын
excellent! Thank you!
@pramodrijal21402 жыл бұрын
Thanks
@HellosudeepSingh7 жыл бұрын
thanks !! very helpful
@AhmedEweis6 жыл бұрын
why tool tip of annotative icon once appear one and then appear two ?
@thachns6 жыл бұрын
thank for this useful lesson
@marrefabbes4537 Жыл бұрын
I can't change the value of the dimension, can you help me?
@arielsharon86946 жыл бұрын
Thank you very helpful
@errolconliffe19713 жыл бұрын
Mvsetup how to change scale from 1/4"=1'-0" to 1/8=1'-0?
@abidkhan-bk7ir7 жыл бұрын
nice video but i want to ask why we use anotation...plz help i am little bit confuse
@sourcecad7 жыл бұрын
Read this article related to annotative property of AutoCAD it might help www.thesourcecad.com/understanding-annotation-scale-in-autocad/
@7mulud7 жыл бұрын
Nice and clear explanation. But, is there any possible way to create new dimension automatically annotative without having to change it through the properties tab? You know that autocad mechanical always put any new dimension in a substyles (with $) according to its type, and unfortunately its not directly annotative although we've already set the parent style to annotative. Its a bit frustrating especially when we deals with a large number of dimensions and more than 2 viewports. Help would be very appreciated. Thank you.
@sourcecad7 жыл бұрын
You can create an annotative dimension style and use it wherever you need annotative dimensions. This article will help you www.thesourcecad.com/understanding-annotation-scale-in-autocad/
@manojt78165 жыл бұрын
Gud...
@khalidali71583 жыл бұрын
What is the difference between annotative and a non annotative objects?
@digitalskills32748 жыл бұрын
Sir Scalling Printing According To Cad tcechnivian Of Consultant i have very Confused to that so plz any question about this i have done that may not good question so plz forgive me in advanced..
@stockmarketkerala9665 Жыл бұрын
Tx sir ❤️❤️❤️
@avexrex7077 жыл бұрын
Hello.. in that case what is your Drawing unit in metric ? plss !!
@myschool89032 жыл бұрын
good
@shaourllc6 жыл бұрын
Thank You Sir Thank you so much.
@abubeta43988 жыл бұрын
very helpfull.
@lidhiyaputeri3 жыл бұрын
Thankyou so much!
@user-jh8qh8ew7r8 жыл бұрын
This is good stuff! Thank You!
@sourcecad8 жыл бұрын
Welcome
@rajibsarkar45635 жыл бұрын
Very helpful tutorial. Thanks.
@venugopalreddyshaga67029 жыл бұрын
thanx sir for this video sir, its very usefull to me
@abubakarahmed79978 жыл бұрын
Is nice . Thanks
@sourcecad8 жыл бұрын
Welcome Abubakar
@govindkumarsahu22687 жыл бұрын
thanks sir
@royalrajpoot36577 жыл бұрын
awesome
@monsterjesse6 жыл бұрын
that is great, thank you
@AbdurRahim-ti4dn3 жыл бұрын
Dada pls provided the scale in inchi feet
@pandianvelu17075 жыл бұрын
150/month shall i join for 1 month and see it is use full or not
@archimike62844 жыл бұрын
Thank you for the well explained video but how can i set up my annotation scale if i start from scratch? I want my drawing scale to be same and dont change even if i change the scale in the layou? Thanks sir
@abubeta43988 жыл бұрын
SourceCAD in Rectangular how can we draw lines equally through Array command.
@sourcecad8 жыл бұрын
Is your question related to array or annotative objects?
@abubeta43988 жыл бұрын
+SourceCAD related to array... if i draw a rectangular and want to draw 5 equal distance horizontal lines. so what method should i adopt?
@sourcecad8 жыл бұрын
Watch this video of array this might help in answering your question, i f you are still facing issue let me know kzbin.info/www/bejne/bZzVcqtujZmXbJo
@bennybenny8254 жыл бұрын
Very complicated to understand sir make easy way
@roddaraghu54995 жыл бұрын
Hello Sir Iam Land surveyor village map insert in AutoCAD how to change the scale in 8 inches 1Mile please tell me Sir out of print 10,20 scale
@cheneeblanchacuzar79387 жыл бұрын
If I made drawings in 1:1 scale I want to rescale it into 1:30 how can I do that?
@navascherngoden12065 жыл бұрын
You can scale with comment(SC)into 30...
@mnomanmnoman16936 жыл бұрын
how to auto cad online job apply and how to work start complet detail
@MrAzlmad9 жыл бұрын
thank u sir
@sourcecad9 жыл бұрын
Said Benzou Welcome my friend :)
@manojantony30397 жыл бұрын
nice but how to create annotation dimension....plz
@sourcecad7 жыл бұрын
Here is a detailed article related to making annotative dimensions and understanding annotative property as a whole. www.thesourcecad.com/understanding-annotation-scale-in-autocad/
@abubeta43988 жыл бұрын
when I copy an object in multiply and increase the scale of one of them but scale of remaining objects is not increase?
@sourcecad8 жыл бұрын
I am not able to properly understand your question Yasir, are you talking about scaling annotative objects using SCALE command?
@abubeta43988 жыл бұрын
+SourceCAD yeah exactly
@sourcecad8 жыл бұрын
If you have made objects annotative then their scale will adjust according to the overall scale of your drawing to give you a constant size of those objects so its completely normal. Moreover annotative property is applicable to some named objects like blocks, text style etc not to the drawing as a whole.
@abubeta43988 жыл бұрын
+SourceCAD ok thank you
@sourcecad8 жыл бұрын
Welcome Yasir
@sidikging29882 жыл бұрын
ur video can be finished in 3 minutes but u make it longer.
@manojsisodiya49524 жыл бұрын
@sourcecad Sir any whatsapp group do you have for tutorial
@handycandy28663 жыл бұрын
Lucid..
@thedesignerdelhincr6 жыл бұрын
Can you translate this video in Hindi
@002rikk2 жыл бұрын
DIDNT MAKE SENSE VIEWPORTS NOT WORKING PFFFFFFFFFFFFF WASTE OF TIME