Def best video on installing a AN air clean on KZbin bar none. Thanks good job.
@FLYANDRIDE154 жыл бұрын
Looks great Sandy and awesome solution to get more air and still maintain that stock look! Nicely done!
@ru04522 жыл бұрын
I'm putting this on tomorrow. Most detailed video on KZbin. Thank you
@MacRides13 жыл бұрын
Did the same mod with my 114 and retained my stock HD cover. Since the breather bolts on mine have a nipple on the end i'm going to drill thru the backplate and reroute the breather lines to a catch can and get that nasty oil mist out of my air intake box
@bigjohnq13 жыл бұрын
I'd like to see how you do this
@MacRides13 жыл бұрын
@@bigjohnq1 i found the Feuling vented dipstick and figured that was enough.
@LSHD25411 ай бұрын
thank you for attention to detail and realizing a video that needed to be shot because here i am 3 years later watching this vid and it has been helpful and 3 years later they are still putting those same crappy directions in the box lol
@xedder1 Жыл бұрын
Best inforformative, and simple to follow instructions by far than all the others that I have search for. I appreciate you taking the time to explain the "how" and "why" you did things, and actually explained each step. I am pretty good with twisting wrenches and following instructions, I am not a fan of trying to figure out how and why somthing was done a certain way.... Again; many thanks!!🙂🙂
@luisvazquez56274 жыл бұрын
Awesome step by step video for the Arlen Ness Big Sucker Install 18-458. Thank you, the original installation instructions suck.
@HOLYSHIFT4 жыл бұрын
You’re absolutely welcome- happy it helped
@Paul-ov4jl3 жыл бұрын
I just installed this same intake on my 19 Ultra. After searching for a video showing this, because the Arlen Ness instructions are awful, I just gave up and did it by guess work. This video is excellent. Best one on the web. Thanks for taking the time to do this. You'll save someone a lot of time pulling hair, trying to decipher the shitty instructions.
@HOLYSHIFT3 жыл бұрын
Happy you enjoyed it... wish you found it earlier before you did your install
@alanwagers70736 ай бұрын
Yes i feel for you , think thats a great look . Are you happy with the flow ? And your tune?
@1022wade5 ай бұрын
Thank you. Done and agree wholeheartedly. Thanks again for making the install easy.
@gorgo22272 жыл бұрын
Really enjoyed your video, VERY informative. I just got the same air cleaner and it was funny that the pictures were so hard to see. Thanks so much for making my install easy. Much appreciated..
@josephrider14324 жыл бұрын
Great Video Sandy. I much appreciate the details you give us. Very helpful. Bike looks great. Glad your subscriptions are increasing. Ride safe.
@HOLYSHIFT4 жыл бұрын
Joseph Saavedra - dude I enjoy making these videos! Because of good people like you that share and comment my channel is growing- and for that I am thankful to you ! 🙏🏻👍🏻
@josephrider14324 жыл бұрын
@@HOLYSHIFT It's my pleasure. I'm in Boca Raton Florida. Looking to get back on two wheels by this year's end. I'll definitely go up there and ride with you guys.
@Drunknmunk223 жыл бұрын
I have the same bike!! Added the Rinehart DBX45s and 12” Miter Bars so far. Was looking into air cleaners and I didn’t even think about keeping the og cover?? Didn’t know that was possible? Thanks Brotha! Ima look into this one now! 🤙🏼
@gabrielpena68459 ай бұрын
Amazing video!!!! Thank you very much. There are so many of these videos on KZbin and they all suck. Thank you for the details.
@UltraLimitedHD3 жыл бұрын
Careful using a 3/8 drive torque wrench down low - if that's what you did. Easy to covert a low ft lb torque to inch pounds, and then use your 1/4 drive. Anyway that's a nice looking setup but I route my hot gases into a DK catch can currently and not into the throttle body.
@shasiceruti89944 жыл бұрын
Awesome Sandy she sounds wicked 👍🏾
@HOLYSHIFT4 жыл бұрын
Shasi Ceruti 👍🏻🙏🏻💪🏻 oh yeah !
@markkloman78284 жыл бұрын
Thanks for this vid. I also like the stock look of the air cleaner, so now I know a cool looking option I have. I have a 2019 Electra glide standard.
@douglasradowick50811 ай бұрын
Hey Holy ShiFt I found the Arlen Ness BIG sucker air filter system a few days ago. Knowing they'd have "suck-rate" pictures with lack-luster install instructions to go with. I'm glad to have found your video presentation on how to do it properly-not half-@$$ed! Not sure what exhaust system to put with it yet. My H-D will be breathing & sounding good when I'm done!!🤓😎🐻👍🏍️😇🎉😁🏁🦅 Doug
@vonmcmullen6193 жыл бұрын
Sandy thank you very much for putting this video out, I was searching for the same exact thing to retain the stock look of my 2017 street glide great video I appreciate you.
@HOLYSHIFT3 жыл бұрын
Thanks for the kind words 👍🏻🙏🏻
@125saito3 жыл бұрын
Hey Sandy. Great video there. I think you're right. You might have the only vid on installing the Big Sucker. I'm the proud owner of a new to me 2018 Road King and this air cleaner is on my list. Thanks for taking time to do this tutorial. New sub'r here.
@jsagazio3 жыл бұрын
Thanks for the video, I’m looking to order that now 👍🏽
@bigjohnq13 жыл бұрын
Sandy I really like this.I see this is going to be one of my first mods when I get the new bike
@HOLYSHIFT3 жыл бұрын
Great easy performance upgrade
@jimmywilliams46 Жыл бұрын
Awesome thank you brother. You helped me get this on my bike!!!
@josephemperly72214 жыл бұрын
Love that air filter. I have a similar air cleaner set up but I would love to get the big sucker style that you installed. Awesome!
@BrewCityRider3 жыл бұрын
That is an impressive monster air intake!
@billflixtone66842 жыл бұрын
Thanks for the interesting video, I just put the HD high flow air filter on mine. Imam a little nervous to see the small screws that, if for any reason came loose, would be sucked into the valves and cylinders.
@Tom-jw1pe2 жыл бұрын
Nice work. Did you notice a difference once you changed it?
@jamesdunn35083 жыл бұрын
I just want to.say thanks. As you know I'm a fan . I just got this air cleaner and remembered I watched this video when you first put it out. But went back to it today just for reference while doing install. Did that My new tab exhaust and tuner today but five minutes after I finished it started pouring. Jersey weather what are you going to do. Wish I knew you.were.looking for a sports tee I just sold my nightster 1200N to get my 2019 Electra glide standard.
@ddaveism Жыл бұрын
Nice video! I’m wanting to go this route.
@jwrappuhn714 жыл бұрын
Looks great Sandy.
@yihan206 Жыл бұрын
Hi I have a question. I did buy this high flo filter and some people said I need a Tune after changing the air filter. What is the minimum that must be done to the tune? Sorry my English isn't very good apologize. PS by the way love your video :)
@JohnDoe-bi4ho8 күн бұрын
Why did you do the tuner? On that 107 is a M-8 and it dosnt need the tuner
@kingpinracing61713 жыл бұрын
Thanks for the vid brother. Very helpful!!
@snakebite65112 жыл бұрын
should have put on a ghost pipe as looks odd with only 1 exhaust. Not a fat of the design of the exhaust as almost impossible to add an oil catch can as i dont want my blow by going back into my engine
@luisvazquez56274 жыл бұрын
Awesome video. I just got the Arlen Ness Big Sucker for my 2017 SGS 107 and this video is exactly what I was looking for to install my air cleaner. The instructions are horrible and vague. Thank you.
@1022wade6 ай бұрын
Great instructional video. I was about to order the big sucker for my 107 to go with some Reinhart slip ons and a V&H FP4. Have you been happy with the big sucker performance wise?
@HOLYSHIFT6 ай бұрын
Yes sir
@phillhamberlin4932 жыл бұрын
So it forces you to take the blow by oil mix back into the intake? I have a catch can installed to get around the filter.
@125saito3 жыл бұрын
You've got the intake and exhaust. Now for the cam. Red Shift 468?
@firemen8123 жыл бұрын
I have 2019 street glide bike would not run . Put old air flow back on bike runs good. I have Vance Hines tuner also Thanks great channel
@HOLYSHIFT3 жыл бұрын
Thanks buddy
@mikemartinsr53504 жыл бұрын
Very nice sandy
@ericlemieux99892 ай бұрын
Your video is very good, thank you
@Gimps_Garage Жыл бұрын
I feel like you’re missing out on 1/4 of the potential airflow from the top where the oem cover, covers.
@michaelofiara97324 жыл бұрын
You gotta get a Power Vision and dump the FP3. Your bike will run soooo much better. I had an FP3. Its not good. You think it is until you try a different tuner. The PV is so much more versatile
@wb45143 жыл бұрын
He said he has a PV. Never mentioned a FP3
@gallegorider1494 жыл бұрын
You made that look easy ! Let us know how it rides!
@HOLYSHIFT4 жыл бұрын
The Adventures of FPFD318 -I will update!
@glencross44614 жыл бұрын
Good video next step cam!!!
@HOLYSHIFT4 жыл бұрын
Glen Cross - spring time brings a new Cam
@glencross44614 жыл бұрын
Cool and you do nice work! 🤙
@patc55994 жыл бұрын
Great on point video Sandy.. !! Did you notice different on Test Ride
@HOLYSHIFT4 жыл бұрын
pat c at low RPM when hitting the throttle the response is way way more snappy. I believe that at higher speeds I’m getting more horsepower because of higher and faster air speed coming into the carburetor - although I cannot prove it only by riding it for that I will need a dyno sheet.
@polylove773 жыл бұрын
Can you do a video on the install of the fuel pak
@paulcorrona35644 жыл бұрын
Did it make a diff in power?
@JohnDoe-bi4ho8 күн бұрын
Why did you do the tuner?
@Vipersshorts3 ай бұрын
K&N airfilter 1717 fits M8
@akidnamedcam6173 жыл бұрын
Hey buddy great review! What tune does it need? I did the SE heavy breather install and trying to figure out what tune I want
@HOLYSHIFT3 жыл бұрын
I used the the Vance and Hines fuel pack 3 tuner with the presets they had. And it works great
@hippie25203 жыл бұрын
What happened to the vent hoses shouldn't you be using them ?
@HOLYSHIFT3 жыл бұрын
Look again carefully at the installation- in this design the drainage of the breather is casted into the base piece and the oil fumes are directed into the air mistake directly into the carburetor
@ianamahana2 жыл бұрын
Thank you for sharing.
@ericlemieux99892 ай бұрын
Whats grease do you take ?
@wb45143 жыл бұрын
Were your new head pipes hard to install ?
@tcatnat703 жыл бұрын
Thanks for the video. I plan on putting one of these on my '18 Road King in a couple of weeks. Any chance you could post the instructions Arlen Ness sent you? Did they provide a link or attach a file?
@HOLYSHIFT3 жыл бұрын
Came with a black and white unreadable piece of paper... that’s why I posted the video... call Arlen ness they will email you a color file
@tcatnat703 жыл бұрын
@@HOLYSHIFT Thanks, I just noticed you're in NJ, I think south by the looks of some of your videos. I am up near Hamilton. I don't ride south too much. I do most of my riding along the river NJ/PA up into NW New Jersey. See you on the road. Check out some of my rides up to Old Mine Road.
@HOLYSHIFT3 жыл бұрын
@@tcatnat70 we’re from Bergen county.... ride all around.
@mikemartinsr53504 жыл бұрын
Old filter can fit inside new one
@harleyroadster95023 жыл бұрын
I want to know if Bergen Harley owned up to it and gave your money back?
@HOLYSHIFT3 жыл бұрын
Haha … no they didn’t! They gave me store credit- I used that a few days later…😀
@hectorsantiago3214 жыл бұрын
Nice.
@bodieb3163 жыл бұрын
Do you have to recharge it like a K&N, or is it water proof?
@wb45143 жыл бұрын
Yes you recharge it.
@harryhowell564410 ай бұрын
I have the same air cleaner.
@jeffrobbins1793 жыл бұрын
Lot of reviews say this filter spits oil... any experience with that?
@RoadieWingZZ2 жыл бұрын
The original version of this system spits, which is why they added the reservoir to the inner side of the backplate. Any leakage will now trickle down and collect (theoretically) into the reservoir where it can be cleaned out when periodically servicing the filter.
@mac76224 жыл бұрын
You saved my weekend install. The directions suck 💩. Thank you 🙏
@HOLYSHIFT4 жыл бұрын
Haha - glad to help
@johnvlipani2 жыл бұрын
Thank you for the video. I threw away the instructions and just watched you.
@zombricone58983 жыл бұрын
How much has it leak oil. Big sucks tend to leak
@HOLYSHIFT3 жыл бұрын
Nothing up to now
@ZomBeatBrainZ3 жыл бұрын
Has a built in catch can, I suppose if you never clean it out then it will leak.
@firemen8123 жыл бұрын
Did you get engine codes after install
@HOLYSHIFT3 жыл бұрын
Nothing!
@djchris47714 жыл бұрын
Does this affect the fuel economy?
@HOLYSHIFT4 жыл бұрын
DJ Chris for sure ! More fuel coming in ... But I don’t know how much it changes. I don’t really care either....😀
@gdei3 жыл бұрын
Tuner your bike?
@HOLYSHIFT3 жыл бұрын
Vance and Hines fuel pack tuner
@Bikernewscanada3 жыл бұрын
👍👏👏👊
@steverobinson241410 ай бұрын
Excellent video showing step by step instructions. Arlen Ness’ installation instructions are very poor and the black & white picture references are even worse.
@jackchristodoulou1973 жыл бұрын
Isn’t it funny that after your spend a fortune buying a Harley you keep spending
@toneysnowwpimppn38422 жыл бұрын
Dammit I spent 189.00 top do this
@125saito3 жыл бұрын
Hi Sandy. I just ordered the Arlen Ness air cleaner kit. It's not nicely chromed like yours, rather just natural cast aluminum color. Did you have any problems with the filter collapsing slightly when you tightened it down? Here's a video of wheat I was trying to say. kzbin.info/www/bejne/hZnYk62KlrpkmtE
@HOLYSHIFT3 жыл бұрын
Hi . The filter that’s being used in the video you sent me is a Harley filter element not Arlen ness. Look at the Harley logo on that aluminum plate. I didn’t have any problems
@125saito3 жыл бұрын
@@HOLYSHIFT Yep, I see what you mean. I should have looked closer.
@edward1967able3 жыл бұрын
Thanks for the video, I’m looking to order that now 👍🏽