ARM resonated Downpipes Paired with AA Equal Length resonated midpipe!

Setup
BM3 custom 93
Active Autowerke Equal Length resonated
ARM Catless resonated downpipes
Srock Non MPE Muffler
BMC filters

[@jortepap]

sounds great. resonated is the best.

[@robertulrich7150]

Thanks, yeah it is a great setup but is a bit quieter at low rpm...

[@Oh_G_M2]

@@robertulrich7150 is it louder or softer than stock?

[@robertulrich7150]

@@Oh_G_M2 it's definitely louder than stock with downpipes. Without its still louder but not by much. It has a more subtle sound at low rpms but screams at the top end. I'm running the same setup without resonators on the midpipe, much louder now. Basically straight piped with the exception of resonators on the downpipes.

[@Oh_G_M2]

@@robertulrich7150 so you switched from resonated mid to non-resonanted? Was it to gain more volume? Hows the rasp between the two setups?

[@robertulrich7150]

@@Oh_G_M2 I've had both sections and have shaped back and fourth. The non res has a more raw sound go it which I like. The downside is there is bad rasp around 2k rpm. For me, I live with that to enjoy the rest of it because it's really that good!

[@takeoffbands1255]

How much power do you think your making

[@robertulrich7150]

Hey sorry for the slow reply. I'm on a Paul 93 custom map, around 550whp.

[@KameaPrimacio]

Any 2k rasp or is it clean and still loud ?

[@robertulrich7150]

Hello, no with the resonator it is completely eliminated.

[@KameaPrimacio]

@@robertulrich7150 thank you for the response . It rlly sucks we have to throw resonators on :/ I would like it to be just as open as possible but I ran vrsf catless and same mid pipe as your but non resonance and I had to take out the downpipe it was to much … maybe I will try this set up

[@Jatt916]

Seems to sound good. I have ARM resonated downpipes. Thinking about keep stock mid-pipe and just deleted the secondary cats

[@SirBJH]

Can you please upload some more clips? After hearing F80 Ho’s similar setup just non resonated EL, it’ll help me & others decide. I know usually the move is to go with resonated EL if you go catless dp’s, but it’s different with the ARM resonated catless downpipes after hearing his. But maybe your setup cuts out even more rasp for the sacrifice of a little bit of loudness, in which I might opt for your setup.

[@robertulrich7150]

Sorry for the late reply. I can get some more video clips for you. In my personal experience unless you have catted or resonated downpipes then don't do the non resonated el midpipe. Definitely way too much rasp. It sounds great otherwise. However, with resonated downpipes and the resonated midpipe it's tame and definitely quiter. It's amazing clean and really sounds the best. I like the setup without the resonators, it's about 20 percent louder, more raw, but has a switch tiny sound and rasp at 2k. If you want more volume from a resonated dp and resonated midpipe then I've heard a rear muffler will make a difference! Hopefully this will help!

[@AbletonLiveTechs]

Nasty! Too bad i got non res AA EL. i heard if i do downpipes it is redicoulous loud

[@robertulrich7150]

Yeah its about 20 percent louder. Really screams!

[@robertulrich7150]

Another note, if you get downpipes get them resonated or catted and then your non res el would work. But it's not for everyone, I personally love the sound!

[@AbletonLiveTechs]

@@robertulrich7150 yoo i already got em 😂 i got Resonated ARM downpipes lol sounds dope af downshifts are crispier

[@robertulrich7150]

@@AbletonLiveTechs yeah we have the same setup! Stock rear?

[@AbletonLiveTechs]

@@robertulrich7150 stock Competition exhaust