Armory Craft Sig Sauer P365 trigger installation video. Here’s the link if your safety lever or slide catch lever fell out. Sig Sauer P365 safety lever and slide catch install video • Sig Sauer P365 safety ...
Пікірлер: 657
@portergang49812 жыл бұрын
I feel like you’re talking directly to me when you say “Do not get agitated, Do not force things”! Thank you for that Sir!
@SigGuy2 жыл бұрын
I was! 😏
@MrJeronlewis6 ай бұрын
If you don't get agitated, you're not a gunsmith.
@bkeaver644 Жыл бұрын
I'm just going to say, I was hesitant on installing this, then I watched this video and it took me less than 5 minutes to do. ZERO issues. Thanks for this video!
@bkeaver644 Жыл бұрын
now to get up the courage for the spring kit :)
@ChristopherLorine Жыл бұрын
This was an EXCELLENT tutorial on replacing the trigger and spring assembly/ First rate. Followed it step by step and it was a breeze.
@intelligentdesign5668 Жыл бұрын
I develop technical manuals for various military platform maintenance instructions. I am extremely impressed with your methodical and steady approach, which yields ease of understanding and clearly explained steps. The end result is the successful replacement of the Sig Sauer P365 original stock trigger with the Armory Craft flat trigger. I appreciate your calm approach in which I successfully replaced the trigger following your instructions the first time and all parts re-installed the first time with no issues as well. I think your recommendation to watch the video all the way through before attempting to perform the procedure is excellent advice. I watched the video twice and when I performed the procedure while listening a third time, I felt as if I had already replaced the trigger, so nothing felt foreign because your video instructions are so clear and easy to follow. In addition to this video, I combined it with the manual safety installation to ensure I included the correct steps for removing the safety to gain access to the pin to be able to remove the take down lever safety bar. Combining the two procedures enabled me to successfully replace the trigger with no issues. Excellent job! Thanks for taking the time to support gun enthusiasts to work on their own firearms with the assistance of a licensed gunsmith.
@jeffreywatkins88856 ай бұрын
Excellent video, very well detailed. I’ve done three trigger changes now. And they’ve all been super easy thanks to this video.
@johnb63712 жыл бұрын
Outstanding job. I’m usually not the guy looking up help. Thank You.
@pokey07493 жыл бұрын
Thank you! I didn’t think I was ever going to get my P365 back together. This is so much better than another video that just tells you to tap the trigger bar and it will fall into place. Impossible!
@davidstroud2662 жыл бұрын
I did this swap in 20 minutes. Your step by step walk through is perfect. Cheers!
@jeremy.thejeweler8 ай бұрын
Your videos are hands down the best on the internet. Hands down. And on top of that, anytime I’ve bought anything from your website it has arrived super quickly with no problems at all. You’re doing the world a great service here, Sig Guy. Thank you.
@SigGuy8 ай бұрын
Thank you very much for the great feedback and compliment. I really appreciate your support sir.
@RidersRange2 жыл бұрын
Thanks again. I used this when I put my AC trigger in last year and my granddaughter and I just put the AC trigger in her new 365XL today, thanks to this video.
@SigGuy2 жыл бұрын
Excellent! Next time have your granddaughter do it for you. I bet she can! Nice work bud.
@RidersRange2 жыл бұрын
@@SigGuy she did it all except the spring. She struggled with that using the needle-nose pliers and the pick, so I did that one step. She kept pausing the video to make sure she was doing each step correctly. My granddaughter, like my daughter, wants to know how things work and they don't mind getting their hands dirty.
@hellscanyonhiker54874 жыл бұрын
A masterpiece, well explained and very much appreciated. Thank you Sir!
@scottamy64962 жыл бұрын
Fantastic, in-depth video and explanation. As you said, it's always a great idea to take pictures as you go, it really helps and takes the guess work out of the task
@davidbock82824 жыл бұрын
Your video was very helpful for my first 365 trigger swap. As others mentioned, I especially appreciated your mention of the takedown bar retaining pin coming in two different colors. Thank you.
@sc774 жыл бұрын
Just wanted to thank you for the tutorial. Flat trigger installed and I couldn't be happier.
@SigGuy4 жыл бұрын
S C™ awesome. Good job bud. I appreciate the positive feedback also thank you!
@yahooblowsme45984 жыл бұрын
@@SigGuy , hey SSG you never really replied but I asked once about shortening the trigger creep and raising the trigger pound to ensure safety. I've looked at my P365 FCU and figured if I just shave a little off the sear where the striker face rest or maybe a very small shave on both the sear and trigger face would shorten the creep. Then I would buy a heavy trigger spring to raise the trigger pull from +5 to hopefully 8 pound pull. What are your thoughts?
@SigGuy4 жыл бұрын
Yahooblows me personally I modify my EDC pistols very little. I tried a companies spring kit and I had nothing but feed, extract and light primer strikes. Took it out immediately. Risk is not worth the reward (which with the 365 there is none because there is very little you can do with the action.
@yahooblowsme45984 жыл бұрын
@@SigGuy ,ok. I'll wait it out, I think sooner or later some company will make a shorter trigger for the P365 eventually since it's so popular.
@SHREDbro3 жыл бұрын
@@yahooblowsme4598 The Sig Armorer does an action job for the 365 that will take care of what you are looking for.
@DaddyGerLo4 жыл бұрын
I love this guy! Got my slightly curved Armory Craft Trigger in with a breeze. You just can't get any more detailed and clearer than this tutorial.
@leroyrichardson69235 жыл бұрын
Great video, much appreciate it. I'd say this job is medium plus difficulty of a 7 out of 10, this video made it doable for a medium skill guy with proper tools.
@fritzbrown62224 жыл бұрын
Thank you for making the upgrade possible through your awesome tutorial. I installed my flat trigger today thanks to your help.
@MrMaintainen3 жыл бұрын
OMG...you are a life saver. I added a manual safety to my Sig P365 XL (so wife can use) but had issues with the slide lock bar & slide lock. This video helped out so much to get them back in with ease. You gotta a new subscriber.
@RyanCook41244 жыл бұрын
Thanks for producing this video. It walked me right through the installation of the Sig OEM flat trigger yesterday. Very pleased with the feel of it. As you stated, the last step was the hardest by far. Overall, not a bad side project and saved me the $50 of having a gunsmith do it. Again, thanks!
@SigGuy4 жыл бұрын
Ryan Cook excellent feedback and congrats! Haven’t heard from one person that wasn’t able to complete this install. Very satisfying when you can do it yourself! Nice work bud.
@mrjdvolk4 жыл бұрын
Awesome video! Took me about 40 minutes, including cleaning and greasing, to install the slightly-curved AC trigger.
@ToughGuyLevi3 жыл бұрын
Great tutorial. I was very hesitant installing a Sig 365 flat trigger. I watched this video 5 times prior to attempting trigger replacement. Took me less than an hour with fingers "crossed". IMHO this is the best video. I did other watch replacement trigger installs but again the step by step process was easy to follow. The close up installation detail photos were terrific thus my trigger Sig flat trigger install was successful!
@b2haz5364 жыл бұрын
Still needed to view this again this morning installing the new AC trigger on my P365XL....Thank you again sir.
@MrVikingmead3 жыл бұрын
Fantastic video. Seriously, provided great step by step info with necessary details and close ups while explaining the “Don’ts” thanks!
@oceres2 жыл бұрын
This helped me over a year ago, and it helped again today. Thank you for putting this together.
@kwb3775 жыл бұрын
Thanks for the video! Watched it once all the way through to get an idea of the steps, then a second time while installing my oem Sig flat trigger. I got lucky...everything fell back into place on the first try.
@AraiAllastair2 жыл бұрын
Thank you. Just worked on my first ever gun and your instructions were amazing. I did eff up the safety lever but I watched your other video and was able to get it all back in. A lot easier than I initially thought.
@SigGuy2 жыл бұрын
Nice work bud!!!! WINNING! 🤙🏼
@TheRealBiggDeal4 жыл бұрын
Being a Sig fan, your videos have helped me with my P320's and now tge P365. Very detailed and easy to follow tutorials.
@SigGuy4 жыл бұрын
Perfect! Thank you very much for the compliment. Reward is when others can do it on their own. 🤙🏼
@fritzbrown62224 жыл бұрын
Sig Sauer Guy has done an excellent & professional job putting together this install video. The P365 trigger upgrade is very intimidating for me to attempt. Thank you very much for your fine work.
@SigGuy4 жыл бұрын
Thank you very much sir for the kind words! I really appreciate it.
@supersoaker2535 жыл бұрын
Just got my trigger and shirt today, thank you for this video. Fastest 23 minutes and 21 seconds ever.
@TheHiney115 жыл бұрын
Great video! I used it to install the flat trigger from Sig, now to the range!!
@goagray53 жыл бұрын
This video was perfect! Great advice to watch all the way through and to be patient instead of forcing it 👏🏾
@TreeFiddy3504 жыл бұрын
Great video, thanks so much! I just replaced my trigger in about 10 minutes with a 90 degree pick and needle nose pliers. And for those wondering if there is a difference for the version with the manual thumb safety (P365 MS), the job is exactly the same- you just push the silver pin out until it touches the underside of the safety and continue from there.
@SigGuy4 жыл бұрын
Larry Shreddy good to know bud. Thanks for the update!!
@awl1684 жыл бұрын
Awesome to know. I was wondering whether I needed to remove the manual safety to replace the trigger. Thanks.
@dylconnaway99764 жыл бұрын
Larry Shreddy Thank you!
@therisk662 жыл бұрын
Thanks for the video! Took a bit of a shortcut on my 365xl MS because I couldn’t do it exactly the way you did since the safety was in the way for one of the steps but the video still kept me on track! Many thanks. 🇺🇸🇺🇸🇺🇸
@SigGuy2 жыл бұрын
I wish I had the safety conversion kit at the making of this video. It literally takes 10 seconds to take off the manual safety assembly. It would’ve helped so many people.
@jimdrechsel36114 жыл бұрын
Tremendous instructional video paying attention to details and anticipating problems. Thank you!
@leonardsands12023 жыл бұрын
Followed this video step by step just as it is presented made for an easy install. As you said, it should be watched through fully before attempting. Do that and it can be done in almost the same time as the video. Also, as you emphasize, don’t get frustrated when things don’t just drop into place. Thanks again for making easy work of what people fear doing. PS Found a great medical KZbin showing open hear surgery. Gonna watch it at least 3 times first to be on the safe side before I give it a try. Kidding aside, thanks again for a job well done.
@mousemx1534 Жыл бұрын
Thank you Sig Guy! I ordered an Armory Craft trigger for my new P365 X Marco on Thursday and just finished installing it thanks to this video and your Deluxe DARK tool kit!
@theradbrad08__ Жыл бұрын
Hit me👆👆 up on telegram for your reward🎁
@Maximusprimeatyahoo5 жыл бұрын
Got my e-mail today 6-8-2019 that my trigger has been shipped, I ordered it after watching your video 4-13-2019, such a high demand for their trigger and Armory Craft kept me updated the whole time.
@SigGuy5 жыл бұрын
Larry Baker awesome!!! Can’t wait to see it installed!
@rodklomp55335 жыл бұрын
Thanks for doing this, it's going to make my installation much easier, once my trigger gets here...
@spookinoff Жыл бұрын
I know this is an old video, but I wanted to say thank you brother! That takedown lever bar fell out on my XL and getting it all back together was giving me fits.
@Pistolpeter-ve1qm5 жыл бұрын
You made this project easier than I expected. Love the new look. Thank you from Seattle
@SigGuy5 жыл бұрын
Pistolpeter 1911 awesome!! Thank you very much for the compliment!
@aldouschiu4 жыл бұрын
Thanks for tutorial! I was able to follow this video and finished the installation without any issues. Great job! Easier than I thought. I do have the manual safety. For those with manual safety, the installation is no difference. Actually make it easier. When you try to loose safety pin without going too far. The safety lever stop you going too far and keep everything in place. Make it easier!!
@Wilders534 жыл бұрын
Awesome! Ya I was wondering about that. My trigger in on it's way!! 🤘
@Raven117344 жыл бұрын
Just bought a P365 today, I want to change to a flat trigger because I prefer them. This video is going in to the Sig list. Thank you for the excellent video!
@SigGuy4 жыл бұрын
Thank you very much for the compliment and good luck sir! You’ve got this!
@tacticalshot15 жыл бұрын
Great video! Just helped me install the Sig factory flat trigger. Saved me $50.00 the gunsmith wanted to charge me to do it. Thanks again!
@tantojutsuninpo5 жыл бұрын
Thank you this helped tremendously!!! Turned out I thought I had the takedown bar in wrong because the lever wouldn’t move but then after doing it again I realized I needed to push up on the slide catch/release to be able to rotate it. Duh. Still nowhere near as bad as doing a full trigger job and magazine release on an XDS I cursed a lot that day
@jeffn55664 жыл бұрын
Just installed my Armory Craft trigger with the help of your video. Great step by step instructions! Thank you!
@SigGuy4 жыл бұрын
Jeff Napalan awesome. Great follow up post!! Thank you for sharing! 🤙🏼
@melheartotexas4 жыл бұрын
Many, many, many huge thanks for you doing this and the companion video on the slide catch lever...I could not have accomplished this without your video. Thanks again.
@SigGuy4 жыл бұрын
Mel and Julie Miller anytime my friend. Thanks for the kind words. Congrats!!
@MF_UNDERTOW2 жыл бұрын
I just installed the AC mag release I purchased from you and it’s awesome. I just got my XL and I can’t stop tinkering. I’ve also done a Sig LXG module, Holosun 407k, a couple 15 round mags and I just ordered a copper True Precision threaded barrel. I’m here to see if I want to mess with the trigger so thanks for all the great content.
@SigGuy2 жыл бұрын
Excellent!!! Nice work. Funny most do the trigger first! You’ve got this.
@TR_TenSeven5 ай бұрын
Today I followed this guide step-by-step to install a new trigger and it went perfectly, thanks!
@dragonsmk18122 жыл бұрын
Great video. Thanks for explaining the step by step process. I found using the screwdriver you supply in the Dark kit with the notch made the trigger spring removal, and install super easy, since it traps the spring in the v groove. Thank you for selling your tool kits.
@SigGuy2 жыл бұрын
Well there ya go! Nice idea. Thanks for sharing. I really appreciate the feed back bud and thank you for your support. 🙏🏼
@ChaseHelo4 жыл бұрын
Thanks for this. Just completed it and admittedly a bit more technical than I originally thought it would be. Had to check the other vid too since slide catch fell out. Cheers!
@SigGuy4 жыл бұрын
Chase Mullins congrats bud! Nice work!!!
@mywrkout13 жыл бұрын
Thank you so much for this video. I watched a couple of others that weren't very precise or clear. After watching your video I had the trigger in and my gun back together in about 20 minutes, no problems at all.
@SigGuy3 жыл бұрын
Awesome! Nice work brother. Thank you for the compliment also! 🙏🏼
@angelmartin24103 жыл бұрын
Great video. It saved me from having to send my gun to a gunsmith for reassembling it. The ety lever and slide catch install video also comes very handy. Thanks!
@renatofelias8324 жыл бұрын
Great video!!! Thanks for the step-by-step procedure and explanations. Like what you said, 'make sure you have a lot of patience if the parts don't match up instantly'. I have to do the installation of take down lever about five times :)
@SigGuy4 жыл бұрын
Renato Felias but you were successful! I’m willing to bet next time is a lot smoother for you. Nice work sir!
@eddieaz40674 жыл бұрын
I used a micro flat head screw driver instead when installing the safety bar after several attempts got it on one try following your instructions. Great video. Safety bar was the only difficulty I came across
@SigGuy4 жыл бұрын
Eddie B agree. It either goes in easily or is a pain in the butt.
@scottydoo3304 жыл бұрын
Ok this is one of the best tutorials I’ve seen on KZbin. You must know me. He reinforced the idea of not letting it get you frustrated. Thanks
@charliewilliamson76924 жыл бұрын
Great video. Followed it along and installed a new Sig flat trigger. My pistol has the thumb safety. I found that the safety will not let you pull the two step pin out too far. At the same time the lower step becomes even with the frame, the pin makes contact with the safety lever. Otherwise went exactly as viewed.
@hardyswinson74565 жыл бұрын
Thank you for the great tutorial. I watched it twice and swapped out my trigger in less than ten minutes.
@SigGuy5 жыл бұрын
Hardy Swinson another success! That’s awesome. If you are in the discussion only 365 group on FB post them pics!
@davidg.99424 жыл бұрын
Patience is a virtue, and I have NONE. Your video is so detailed that my triggger installation was so fluent and smooth that for a second or two I thought I am a PRO. I was laughing at you when your trigger bar spring popped out- yeah I am an Evil. SAS has different take down lever but once again with your video it was easy to figure out the position of the lever. Many Thanks !!!! My Apologizes for laughing.
@SigGuy4 жыл бұрын
David G. And comments like this my friend are what make it all worth doing. That’s awesome. Congrats pro! 🤙🏼
@bryanhanson22257 ай бұрын
Found this video in the midst of rage quitting and treating my FCU like I’m 13 and it’s my Xbox controller after losing a heated 1v1 me on rust. Thank you for taking the time to make this video!
@PaulMcGroinBigly3 жыл бұрын
Exceptional video. Ordered mine about an hour ago. Thanks very much. Will be watching this again while installing it. Very good tutorial.
@cramerlong22765 жыл бұрын
*Sig Sauer Guy* I found if I took a skinny panhead screw driver and ground an 1/8 Notch in the blade . It makes taking out and re-installing the trigger spring a 2 second job : Just sharing
@ronmeany67147 ай бұрын
Bought a new P365 Spector Comp wanted gold trigger, called two gunsmith said it would take 2 weeks to install. Thanks to this video I did it in 40 minutes! Really appreciate your help worked great. Thank you so much!
@SigGuy7 ай бұрын
Excellent! Much more satisfying when you are able to do it yourself. Saving $$$ is a nice as well! Nice work! 👌
@Mr2wheelfoster4 жыл бұрын
Thanks for the tutorial. Completed the install in about 10 minutes with no problems. Can't wait to try it out now.
@SigGuy4 жыл бұрын
Thank you and nice work brother! 🤙🏼
@stevebrown71904 жыл бұрын
This is the best installation video on KZbin for this trigger. Very well done
@SigGuy4 жыл бұрын
Steve Brown haha. Thanks brother. Really appreciate the compliment!!!
@jakepschirrer91504 жыл бұрын
Great video, man. Watched it twice before installing a red flat AC trigger. Couldn't have gone any smoother. Love the detail of your videos. I also installed a sniper grey and now have a Titanium grey grip module. I have the manual safety but the install of the trigger was basically the same. Thanks for a great video!
@SigGuy4 жыл бұрын
🙌🏼🙌🏼🙌🏼 Excellent!!!!! Awesome color selection also! My favorite. Well done sir! 👌🏼👍🏼🤙🏼
@randyshanahan89475 жыл бұрын
ABSOLUTELY FANTASTIC VIDEO. Excellent quality. Patient and detailed explanations. This made it super easy for me to install my AC P365 flat trigger. Thank You!!!
@SigGuy5 жыл бұрын
Awesome. So good to hear all the success stories. Thank you for the great compliment sir. Appreciate it very much.
@snowhack8903 Жыл бұрын
VERY comprehensive!!! You made it nearly idiot proof. All the tutorials should be like this. I'm a Glock armorer and Colt armorer but new to Sig, so this was just what I needed. I tried following another guy on here, and he was running through it like he had a drill standing over him with a stop watch. Thank you
@SigGuy Жыл бұрын
Excellent compliment! Thank you very much. I try to make it as simple as possible so the success for everybody is almost 100%! No matter who you are. Thank you very much for taking the time to leave feedback. I really appreciate it. 🙏🏼
@tomhohum42755 жыл бұрын
With this instruction video I had no trouble installing a GG flat trigger. Very satisfying to do it on my own!!! To the range this week😃
@SigGuy5 жыл бұрын
Thomas Geisler that is good to hear. So much more satisfaction when you do it yourself. Good job. Have fun!!
@craigwallace51845 жыл бұрын
Very through well spoken video. Took the worry out of me taking mine down. Thanks!
@spearageddon32793 жыл бұрын
Your instructional videos have got to be THE MOST detailed I have ever seen. New sub for sure. THANK YOU! 👍👍
@SigGuy3 жыл бұрын
Best comment EVER! 😊 Thank you. 🙏🏼
@jayfran55635 жыл бұрын
just installed my Armory Craft Sig Sauer flat trigger. Could not have done this without your video. Thanks from Long Island!!
@SigGuy5 жыл бұрын
Good to hear! I’m glad it was helpful. You deserve all the credit though! 🤙🏼
@Randys_Gear5 жыл бұрын
Appreciate the video, just fished the install and all went smoothly thanks to your in depth directions. Thanks
@SigGuy5 жыл бұрын
Randy Sap good to hear. Thank you for the compliment sir.
@jimrodriguez80474 жыл бұрын
Great, great video and done at the right speed and detail that I could keep up with you. Just did my trigger and couldn’t have done it without you! Thanks!
@SigGuy4 жыл бұрын
Mission accomplished for me! Thank you for the feedback. So much more rewarding when you can do it yourself isn’t it?! Good job brother.
@Bostonnick34 Жыл бұрын
This channel is great, I just switched the extended slide release & a curved trigger into my xmacro. Thank you!
@SigGuy Жыл бұрын
Thank you very much for the compliment and good work out of you! 🤙🏼
@user-wi3uj9qj9f9 ай бұрын
Thank you for the great video. It was very easy to follow and I really appreciate your calm delivery of information. Things went smoothly and I now have my new trigger installed.
@josecardona23854 жыл бұрын
Thank you, had a fast and easy install because of this video.
@matthewiannone5028 Жыл бұрын
Thanks Sig Guy, very informative, I got my delivery in today and installed perfectly.
@rodklomp55335 жыл бұрын
Thanks, I have a flat trigger coming, this will make it much easier installing it..
@rustyshackelford63724 жыл бұрын
great video man! literally took me having to rewind 2-3 parts, but got the new trigger installed in under 30. really saved me a lot of head aches! thanks alot mate!
@SigGuy4 жыл бұрын
Awesome! Thanks for the compliment and congrats. 🤙🏼
@detroitman19893 жыл бұрын
Thank you for the tutorial I was able to replace my trigger in 15 min. My gunstore wanted to charge me 80 dollars to do it. Great job THX
@ac3tate909 Жыл бұрын
20 mins! Done and done! Watched it once Thru and then went for a day later I was really pleased with the takedown safety bar dropping into place relatively easy. At first I was under the impression the bar had to be sort of bent up (I know that’s not what you meant) behind the slide lock to get into the notch but it was more a matter of just moving the bar around on the trigger end to get it to drop into place. That was the only part where I was a little confused but of course the video was masterfully crafted and gave me exactly what I needed to do this job myself. Another gun mod successfully accomplished by a dude with very rudimentary skills. Thanks internet! And thank you sir! 🤘🏽🤘🏽🤘🏽 Oh and thank you for the quick shipping and good prices on my trigger and mag guts! Really impressed with the magguts product I’ll be ordering more soon from ya
@edwardaviles78284 жыл бұрын
Awesome video tutorial. It encouraged me to order a flat trigger from Sig for my soon to arrive P365. Thank you Sir!
@edwardaviles78284 жыл бұрын
Oh, and I almost forgot. I also ordered a P365 cleaning mat as well. :)
@bishopgeorge13334 жыл бұрын
Great video, I have the flat trigger coming in the mail Friday so I will be putting it in, I watch it twice but I will watch it a few more times and when I start on putting it in I will bring this video up and do it step-by-step, thanks.
@LIDigga5 жыл бұрын
Yup Dude...Your a Rock star!!!!Installed my new trigger 1st shot while watching and pausing your video.One of the best how to vids I ever seen....Nice job and thanks for taking the time to help...
@SigGuy5 жыл бұрын
L I Digga haha. And you earn the best comment award! 🤙🏼 haha. Awesome man! Nice work.
@dmlchannel3262 Жыл бұрын
This Sig Guy video... still helping people out after three years. Thanks.
@SigGuy Жыл бұрын
Funny thing is there is a newer better video than this one. Yet this one gets all the love. Lol. Thanks for watching bud.
@brianhiatt53755 жыл бұрын
Thanks! Your video helped a lot. Everything went very smooth. My takedown bar went back in as fast as yours did in the video. The biggest problem I had was that my smallest punch wasn’t small enough for the trigger pin, so it took me a little while to find something to fit.
@SigGuy5 жыл бұрын
Brian Hiatt glad it all went smoothly. Paper clip to the rescue?!
@brianhiatt53755 жыл бұрын
Sig Sauer Guy a tiny nail
@JeffWrede5 жыл бұрын
Arrived an hour or so ago and installed!! Thank you for the video, VERY helpful! Well Done!!
@SigGuy5 жыл бұрын
Jeff Wrede awesome!!!! Thanks for the compliment Jeff. Loooove that trigger!
@Havoc8135 жыл бұрын
Very in-depth instructional video which helped me with my flat trigger install on my P365. Much appreciated!
@SigGuy5 жыл бұрын
Havoc813 never get tired of hearing the success stories. Thank you sir and good job! 🤙🏼
@Elxchino323 Жыл бұрын
Thank you so much, i was able to replace my original p365 trigger to install a flat nickel trigger with the help of your video.
@SVTFordxx3 жыл бұрын
Awesome video again. I did find that the take down bar is easier to wiggle free from the back first. 2nd the trigger bar spring is super easy with 1/8" finger nail.
@Jay626j3 жыл бұрын
Great tutorial! Super easy install. Can't wait to get mu grip module back so I can test everything out!
@jguadiz Жыл бұрын
Absolutely great job creating this video. Very thorough. Thank you!
@mrpabs58643 жыл бұрын
I installed with no issues and I had fun while at it, I was actually sad to finish, I kind of want to re-install it all over again. Thanks for your help.
@SigGuy3 жыл бұрын
Haha. That’s awesome. A solid reason to BUY ANOTHER 365! ❤️
@johnbehimer40203 жыл бұрын
Good video, I didn’t have any issues installing my new trigger after watching this. If you have some level of mechanical knowledge/dexterity it’s not a challenge at all.
@Two_Names Жыл бұрын
Welcome to mid 2023 where this video is still relevant. Had me able to swap the x macro's flat trigger to the oem curved trigger in the time span of the video plus a few minutes to account for pausing. Thanks Sig Guy!
@Glock-Tec12 жыл бұрын
I don't know if you still monitor the comments in this video, but I still wanted to thank you for posting it. I just successfully changed my OEM P365 trigger out for one of Sig's flat triggers using your video. That little trick you did with the pick to get the take-down bar back into the slot was masterful and allowed me to get it back in place in less than a minute. Your overview of how the parts fit and interact made it all that much easier. Thank you for a great video!
@SigGuy2 жыл бұрын
Yes sir I still monitor comments. Thank you very much for the compliment and congratulations on getting your trigger installed. I have changed my process a little bit as you can see in the updated video I have on here. Both will get the job done e though. Again thank you. Have a great weekend.
@kevinwilliams8554 жыл бұрын
Best "how to" video on the install of the flat trigger. Excellent. Thank you for your help
@SigGuy4 жыл бұрын
Kevin Williams excellent compliment! Thank you sir. I really appreciate that. 👍🏼
@scooter59402 жыл бұрын
Thanks so much for this. Watched the video twice and then attempted to install an AC red flat trigger on my 365.. Took me 30 minutes, about half of that with the last step. I found that putting very, very gentle pressure on the pick to push the takedown lever as far outboard as possible, and the safety bar as far inboard as possible, with very gentle downward pressure on the bar did the trick for me (you say as much in your video) but I was hesitant at first to use any pressure at all, but when I did, it popped into place!
@SigGuy2 жыл бұрын
Excellent feedback! Thank you very much. This video is pretty old though. I have updated newer ways to do this procedure on my KZbin channel. Either way congratulations and good job!
@scooter5940 Жыл бұрын
To update this post, I have subsequently removed the AC trigger and replaced it with the OEM flat trigger from Sig, which came with a new trigger spring and pin. Now the trigger breaks at 90 degrees very similar to my 365 XL and X series 320. I found a bit less take up and a slightly crisper break with Sig, and of course the AC trigger broke a little further back, to my liking, anyway.
@cuddzilla9 ай бұрын
This video is spot on. You made this install easy. Thank you sir!
@gunningforsurvival65683 жыл бұрын
Thank you for doing this video spot on I managed to install my trigger in about 10 minutes or so after watching this video a couple of times it was extremely helpful
@SigGuy3 жыл бұрын
Thank you for the excellent comment. I really appreciate it. Nice work bud.