Sig Sauer P365 Grip Module Replacement

[@4lbertoZ4val4]

4 years later and this video is still doing the lords work! This helped me exchange my 365XL grip module to the X Macro. Thank you!

[@DevRel1]

This video is the key to understanding that this gun the part you need an FFL for is the FCU. What is so cool is that if you have purchased either variant 365 OG or XL, you can simply buy the alternative grip module, alternate slides or barrels and simply plop the FCU into it. This means in a matter of minutes you can go from deep concealed to XL. you can literally have 4 or 5 different configurations if you have alternate grip modules, slides barrels or triggers. Truly dynamic. I'm so happy i purchased this platform. One thing that should be noted is you may need XL and original mags if you plan on swapping out XL grip module for the original smaller module and he did overlay that message, but overall truly amazing video.

[@C25-nz4qy]

I know I'm a year late but gosh dang this is such a great and informative video. Step by step awesome. Thank you much sir!

[@SigGuy]

Never too late especially for a great compliment. Thank you sir. I really appreciate it. 🙏🏼

[@rpmteg1]

Perfect. I've been searching to see a side by side color comparison. Thanks for the great video as always!

[@tessigator]

The 365xl is next on my purchase list, and I can't wait to customize it with one of these grip modules. Thanks for showing how it's relatively easy.

[@knight3930]

You made it look so easy. Thanks for pointing out that safety lever. I have not had it done on my 365, but now I know that there is something else to check for putting on the slide. Keep up the good work and take care.

[@adaboy4z]

I use the P365 grip on the XL slide when I wear shorts and T-shirt. The grip is less noticeable about 3/4 inch.

[@MaddoxLyrics]

adaboy4z yesssss finally someone agrees lol long barrel short grip is way more concealable and shootable than the short slide long grip

[@marksd5650]

I am very glad to have found you. BTW I just checked and 365 grip modules are currently out of stock. I’m in Massachusetts so I have to have a thumb safety, and Armory Craft won’t have any p365 xl grip modules with safety until Sig makes it available to them. They don’t make that model yet. I went to the factory store last Friday. Great video.

[@62dobie]

Mark S Delaney, why do you have to have a safety?

[@marksd5650]

BIG LOU Massachusetts compliance laws. External safety or a ten pound trigger pull, and no more than 10 rounds in the magazine. The P365 is Mass compliant but the P365xl is not yet MA compliant. There are not many hand guns that are MA compliant.

[@blakebowers2915]

I’m new to the Sig world…the simplicity blows my mind!

[@garyreadler4886]

Thanks SIG Guy, your instructions were perfect. Excellent description.

[@DawgPoundx19]

Was doing my install, that angle of the front is key to getting it seated. Your video helped. Thx.

[@SinCityVillain]

Sig Guy, I know this video was 3 years ago, but, i just saw it. I loved that grip module and also the mag release and ordered them both. I've never done any work on my firearms until watching this video and also the one you made to change the mag release. I've always been worried about messing something up and blowing myself up..lol.. These videos are AMAZING and slow and patient and informative. Thank You so much for step by step and the tips and tricks and not assuming everyone is Navy SEAL gun and a gunsmith! I don't know if you'll ever see this and anyone else who might can answer my question: Does the new mag release ever wear in or get easier to eject the mag? The standard stock release that came with it was hard to push and release was sorta meh. The new extended release is just as hard and doesn't eject or click, the mag just kinda falls out and i wanted to know if this was "normal." Again, thank you very much for the great videos!

[@WARDofLORE]

New Subscriber. Really enjoy your videos. You sound like you are enjoying sharing your knowledge, Thank You. It's like sitting down with a friend.

[@SigGuy]

WARDofLORE aweeee. Thank you sir. That was a really great compliment. I really appreciate it.

[@MarcFaucher]

Thanks! I was able to make the replacement without too many problems. Everything was well covered. CA model with a GrayGuns grip. OD Green. It looks tight.

[@paulscountry456]

Sig really has the whole ergonomic thing down pat, my 226 with e2 grips is perfection , I put a limbsaver rubber wrap around on it and it is superb.

[@marreogreenlee3150]

Glad I found your channel!...I love my EDC 365XL & I see myself changing a few things. I'm new to the firearms world & the info you give is well appreciated 🤜🏾🤛🏻

[@JerryLee..]

I received my P365XL earlier this week and it made a squeaky sound when performing a dry fire pull of the trigger to the stop. With your videos and knowledge sharing, I felt comfortable enough to take the gun apart (FCU removal). A little oil on the trigger spring solved it! Couldn't have done it without your videos! THANK YOU!

[@SigGuy]

Love positive feedback like this. Makes it all worth it. Nice work sir! Enjoy your weekend and your new pistol. 🤙🏼

[@JerryLee..]

@@SigGuy if it wasn't for your videos, I wouldn't own the P365XL. Thank you!!

[@SigGuy]

Big-J well crap. If it wasn’t for you I wouldn’t do what I do. Now what?!?? 😁😉🙏🏼

[@JerryLee..]

@@SigGuy LMAO!

[@wheelstandr]

Been looking for this grip module forever. Finally found it, then the spectre comp and macro come out. I personally like the spectre comp. Was just on Sigs site to see about a spectre comp slide. $500. Nope, not doing that. Would be awesome if a company made a comp slide that didn’t cost that much. I’m thinking $200 max. I know, keep dreaming.

[@timmcgrath6496]

Thank you that was super easy. I bought one from Greyguns before I watched your video. Nice module but I wish it had a bit more stippling like yours. Going to order a couple from the site you mentioned.

[@SigGuy]

Tim McGrath the GG modules are nice. Definitely a step up from factory. The Armory crafts are excellent though. They should have more in stock very soon. They are currently redesigning them. Almost done.

[@timmcgrath6496]

Just another little tidbit, the GG modules come with the mag release...

[@buckeyeblaster]

Great video! I just picked up a P365 XL and was looking into customization options

[@celestebuccino7267]

I got like and subscribe so quick!!! Thank you for sharing your knowledge. Super excited to know how to modify my 365xl. Cheers!

[@OGCJ10]

How do you like the XL ? .. Debating between the XL and the standard 365. Do you find that it prints with the longer grip?

[@peterfoxwell5198]

Just received one of the new grip modules they have in your video. Unfortunately they redesigned it a little bit if you look at their website. I like your old design better.

[@rickc680]

I really hope these will be available for the thumb safety model

[@undercovercop2000]

rick c fudd detected

[@dynosaur5291]

Where can I get that Sig armorer block and green punch from? I really don't wanna scratch my frame taking out that pin.

[@lude3645]

Excellent video. .. Can the 365 No manual safety be converted to have the manual safety? Thanks

[@Agent-vj3ns]

Yeah but the safety lever and tiny pin/spring sell for about $140 now. They used to be $30 when there wasn't shortage. Now the reg p365 sells for $700 on GB

[@darinmcmakin8394]

Helped me through the process without a hitch! Thank you Sig Guy.

[@SigGuy]

You are very welcome and thank you!

[@s2knott]

Great video, perfect camera work. I don’t need to see a guy and his house talking about a gun this works perfect and gets you up close. Subd

[@SigGuy]

Thank you for the positive feedback sir. I really appreciate it. 🤙🏼

[@Agent-vj3ns]

XL grip modules w mag release and safety cuts are back on Sigs website. They have black and gray. I got one of each for my reg p365.

[@Raider1836]

Thanks very helpful!

[@jerseyltd]

Are the rails different from the stock XL frame? I had to buy a TD rail for my XL. Does your frame have the same issue or is it good to go?

[@alexlitner6611]

Very informative! Thanks

[@markbarefield7570]

I looked through your videos and didn’t see a review on the p365xl. I’d be interested what your thoughts on with the XL. Have a P320XC and was looking at the P365xl for my wife.

[@SigGuy]

Mark Barefield I don’t own an XL. I have an xCompact they fills that roll. I want my EDC to be as small as possible.

[@South-Texas-Drones_5801]

Just ordered the brown for my p365xl 🙌🏽

[@Maximusprimeatyahoo]

I asked you if i should send my P320 in for the upgrade a few months back you said i should even tho i had the Apex trigger installed, and you were so right and Apex gave me credit for the trigger and i bought the new one for the upgraded trigger and a upgraded trigger bar. I must say i do like the Sig trigger better than the Apex but with the Apex trigger bar,now I'm waiting on the Armory Craft flat trigger. Thank you for your advice. and Sig had it back to me within a week.

[@SigGuy]

Larry Baker wow. Great turn around!!! Thanks for the update. Apex is a great company. Can’t wait to see those AC 320 triggers out there!!!!!

[@michaelshea5622]

Good video and informative. I own several Sig weapons and the 365 is my next. That grip module is the stuff.

[@nyinfamous2k2]

Since the P365 X has (I believe) the same slide as the regular 365 but the grip of the XL. Could we put a 365X module on a regular 365 and essentially turn it into a X?

[@tt3230]

Yes… I’m actually taking my x and putting the standard module grip on it

[@jtepsr]

can you do this with the XL model

[@LostPilotage]

You are looking at the XL frame in the video. What is your question?

[@stretch130MFE]

That's the XL Module. Have you looked at the website?

[@victorcaraballo695]

Good where can I get this model of grip friend?

[@skylergaitan]

Bought my 365 yesterday saw this video and went straight to Oder a tungsten grey

[@AttackYakChaos]

How does the gray guns module fair with wear? Holstering it does the cerakote wear off? It says it does on their website so I wondered if a $200 investment was worth it since I need a manual safety cut out as well.

[@robertice8270]

Are these exact molds of the Sig modules? I want to buy one of these from Armory Craft but I have a custom holster coming to fit the XL with Olight mini and TacDev Rail adapter. Great video! I will be back to watch again when I’m swapping grips!

[@michaelbattin6717]

Great video! I called Armory craft and what a nice group of guys! I’m new to my sig and they treat you like a friend.

[@SigGuy]

One of many reasons I prefer to do business with them as well as be a distributor of their products. If you need anything feel free to check out my website. Sigguy.Com

[@michaelbattin6717]

I’m going to order “we the people stand” will it fit my p320 x compact as well my p320 x5 ?

[@SigGuy]

X5 definitely. Which grip on the xcompact?

[@acciontactica364]

For big hands the standard 365 with the XL grip module is the best of the 2 worlds, I fell firm and complete with the 12RD, the Hogue grip, visually make sense.

[@AttackYakChaos]

And you can run a 15 round too right? I have a p365 and it doesn’t fit my hand well. Have the Lima laser too. Wondering if it will fit on the XL module (the 365 slide and Lima laser on XL module)

[@josedelarosapr]

@@AttackYakChaosYeah! everything fits in the module of the Sig p365, but if you want to use the 10-round magazine, you have to upgrade the base plate, I bought 10-XL CONVERSION BASEPAD FOR SIG P365XL from tactical development; This is a video when I do my upgrade kzbin.info/www/bejne/jaTIqpyQlJKGpas .

[@jaason101]

I just installed the gray guns grip module on my p365. Really like the Amory Craft one but they were all out for awhile. Really impressed at both Grayguns and Amory Craft. Customer service on both are incredible. Anyways, I would really like your opinion of the true precision barrels. I was thinking of trying one but want to know if it is worth the money. This is for my ccw pistol.

[@austinmitchell2746]

Have you tried both the armory craft and gray guns modules or only gray guns?

[@takingaim7298]

Yes i tried both. Both are great triggers but the grayguns felt more comfortable to me. I d like to try their curved trigger. I heard it is awesome

[@austinmitchell2746]

@@takingaim7298 I was actually talking about the frames not the triggers

[@takingaim7298]

@@austinmitchell2746 lol sorry man i m slow lol. I haven t tried the Amory craft module. Most of the time i d look they were out. Maybe i ll try one at some point. I love the look of them

[@austinmitchell2746]

Any chance you tried the hogue grip?

[@kwik2hear915]

You make it look easy, great video.

[@GMJM23]

Do you happen to know where I can get a replacement spring for what you referenced at the 8:45 mark ?

[@micronious5747]

Wow, I was about to take mine in to switch out the grip module…thanks for this! I would like to change the mag release on my husband’s p365 to the right side bcs he’s a lefty; do you have, or could you do, a quick video on that?

[@SigGuy]

There are 3-4 videos on my KZbin channel showing this. There are many videos covering the 365 and 320 you also might be interested in. Here is the link to one of the mag release videos. Good job by the way! kzbin.info/www/bejne/Y3K7kGSerLF5ras

[@chrislegrand7214]

Thank you for the video! Are these grip models compatible with a p365 Sas?

[@reese-partyofsix60]

Thank you!! Your videos are great, very informative. Quick question, would you know if the Armory Craft pinky extention works with the Katana magwell flare?

[@nikiluft2516]

Awesome video. Was wondering if you could post a picture/video of the gold trigger that armory craft offers. Want to compare it to the true precision gold barrel.

[@lexandersig]

Mine arrived grip module damage, my P365 X. There is a gap between slide and grip module. Slide was wobbling and rattling. The problem is the grip module inside, where it connects to the FCU, replace the grip module problem solved.

[@rafelito1977]

Hi thank you for the vid. Super nice but Whats the website i can’t find it in the sig website thanks

[@janeyolsen4692]

Will the Radian backstrap and magwell work with this grip module??

[@ShawnShipstad]

I have the Wilson Combat grip module. The cost was about 75.00 including the extra & optional Tungeston weight kit which I think was 20.00-I think it was worth it as it added about 20 grams of weight to the grip module.

[@adamjuckniewitz727]

fantastic video. you covered soo much. gj bruh

[@SigGuy]

Thank you sir for the excellent feedback! I appreciate you! 🙏🏼

[@jimrodriguez8047]

Very cool grip modules..

[@SigGuy]

Jim Rodriguez thank you sir.

[@utahnick]

How long before the cerakote wears off?

[@shaunbrown1696]

is this the XL grip on the regular 365

[@PhilGaitan]

What if you have a safety?

[@PR-KUSHBOY]

Can I still use my 12rd mags from my standard p365 if I get the p365x frame

[@GunsandGuava]

Does this help with the slide wobble up and down in the front that some P365 have.

[@frankmarks5890]

I'd like to see when they're going to make the slide release and the takedown pin and stainless and red and blue and yellow

[@vule-nd5dm]

Sorry I was being inpatient I watch the whole video and you did mention it thank you very much.

[@johnnyB.Goode.]

Where did you buy your barrell?

[@ApharmdBattler]

So these are going to be available for the P320? I'd like to get some of these for my X Compact.

[@dadthefixerflorida]

Is the ac grip mod worth the $150 it costs. I’m looking at the form, but mainly the function. Does the forward grip stippling work? Or is it too small to help?

[@inurfaceson9722]

Just got mine and it works a charm :)

[@philb9373]

Thanks, video is a great help!

[@thebladerunner49]

Do you see in improvement in accuracy with the Armory craft trigger upgrade?

[@stevestory8483]

Curious if this grip will accept a X-macro slide

[@marcdenen6160]

Will they work for the 365ms

[@donjohnson5424]

Probably a stupid question but are these factory Sig grip modules that Armory Craft then cerakotes and laser stipples?

[@SigGuy]

Don Johnson yes sir.

[@alannorris2375]

Hi SG - Apologies if this has been asked previously. Will the AC grip module work with a holster designed for the SIG P365 grip module? Are there any size differences in the trigger guard, etc.?

[@sercastamere9853]

SAS owner, though I'm replacing the SAS slide-catch with the standard P365 lever, and I'm wondering if I would still need to modify thr grip module to fit the SAS slide?

[@03697824]

How do you change the lever?

[@progressivegunowner8066]

After cleaning the FCU where should you apply grease or lubrication?

[@gilbertrivera1293]

It’s pretty, does it come with a matching holster?

[@russscott552]

Vietnan infantry veteran we carried 1911's witht the safety on and were trained that way.sometimes with the cghamber empty, particularity after some knotblew z hole thru his hand playing around with z loaded pistol he thoughtvwas empty 8:40 hean😢o thead

[@doncrawford8872]

Where does one procure P365 XL grip module and trigger as shown, please?

[@dougmottert2258]

sig

[@frankpalermo9307]

I just installed mine. Love it

[@frankpalermo9307]

@In Korea local shop

[@lancependergrass5027]

That was such an easy swap out. Def want to do this to one

[@matrox999]

If I were to take a 365xl and buy a 365 module with the thumb safety I could use the the 365xl slide and firing mechanism in the 365 safety module?

[@SigGuy]

idontcarewhatyousay yes sir.

[@vikta6]

I like that trigger you got but does that improve the trigger pull? I wanted to improve my trigger so it feels more crisp and less squishy. I like how the trigger pulls on my sig 226 legion

[@vikta6]

Is it as simple as changing a spring? Changing the actual trigger is more for looks?

[@SigGuy]

You are not comparing apples to apples. One is striker fired and the other is hammer fired. Hammer fired is always going to be more crisp. The trigger does get rid of the a lot of the sloppiness.

[@zyzzuschrist3410]

The red grip module is very nice

[@Tendeep]

Did AC stop making these? They seem to be stuck in a sold out state.

[@moisecalloway2818]

I bought a Sig Sauer P365 XL and am swapping the grip module with that of a P365 X Macro. Do I need to re-zero the gun after I swap out the grip module?

[@SigGuy]

Negative.

[@moisecalloway2818]

@@SigGuy thank you

[@mikemerino3986]

Good Training! Thank you

[@franciscosuarez2346]

No drilling or cutting?

[@jimd1968]

Sig Guy, have you seen the Icarus 365-365XL-320 lower all aluminum grip module? Its all aluminum and the 365-365 grip module has a pic rale.

[@minnesotanice369]

where can you get extended barrels for xmacro?

[@dannyfigueroajr4678]

How long did it take to receive the grip module after ur order? Really want to know cause I can't wait to buy one. And great video by the way

[@SigGuy]

If they are available they will be in stock and shipping is the same as any other part. Couple days. A lot of times they are not in stock. You would need to check Armory Crafts website. I do not sell these on sigguy.com.

[@qtip_cs]

Do these armory craft grip modules affect retention in Kydex holsters? They look awesome, I'm considering getting an XL in sniper grey.

[@SigGuy]

They are Sig grip modules that have been customized. All aspects are the same other than grip texture being increased.

[@dcowan023]

Thank you, thank you, thank you. I’m upgrading my X-Carry and 365XL. Your videos are so professional! Keep up the good work, S/F, DMC PS. Any thoughts on a suppressor height front sight for my P320 X-Carry? I have a Romeo1 red dot. I can buy the Sig XRay3 set, (front and rear), but I’m looking at the Sig #6 front sight. I just can’t find it anywhere. Ultimately, I would like to co-witness with my red dot like my 365XL paired with my Romeo 0 does.

[@codybishop2877]

I have the nra tan p365. Which color would you recommend on it? Bronze or the fde brown?

[@vule-nd5dm]

Can you please what brand is your barrel and compensator on your p365?

[@SigGuy]

vu le so that is a True Precision barrel with thread protector. That’s not a comp. I do have one from HB Industries coming Friday. I will post a picture on my Facebook once I receive it.

[@vule-nd5dm]

Thank you sir!! I love the look of your p365. I dont have social media but im sure will be awesome. Will look foward for your future video. Thank you

[@austinmitchell2746]

Have you tried the grey guns frame as well? If so which do you like better and why?

[@ISAACP_THEGUTTERGUY]

This video is great. Deffinatley a new sibscriber and customer as well cant wait for these grips and triggers to be back in stock. I just wish there were cerakoted 15 rnd magazine base pads

[@twdunn9]

Just got my ceracoated AC XL grip module and installed perfectly using your video. One question though, it seems the ceracoating on the inside of the mag well causes the mags to not drop free compared to my non coated frame. Is that your experience? Any correction?

[@LL-fi4rr]

Does your rear frame pin walk out slightly? Mine has never walked out completely but after shooting it very slightly protrudes and I can push it flush with my fingernail.

[@SigGuy]

Mine has never done that. I would recommend replacement of the pin and spring.

[@Sean-xh2te]

Will the olight mini fit on that rail or would you still need the recovery piece?

[@FugitiveRecoveryAgent-km9ce]

The Olight mini will work but you still need the 1913 picatinny rail adapter!!.

[@MarceloLopezJr]

New here...what barrel is that on your 365? Threaded? Oops...should've waited longer in the video... Thanks for the discount code.