Upgrading The Parkside X20V Team 2Ah Battery Pack to 9.9Ah Using 3D Printer

Hello. In this video i show you how to upgrade the parkside battery pack.
If you do not have sufficient knowledge of li-ion battery please don't repeat this upgrade.
STL file making by Gabriele Gatti, the link you can find in descriptions.
STL files: www.thingiverse.com/thing:468...
Lanzhd 3300mAh 30A 18650 Li ion battery: www.aliexpress.com/item/32888...
Board Spot Welding: www.aliexpress.com/item/40011...

[@moskil2]

Good job as a hobby, nice spot welding, but actually, it doesn’t make sense because an 8Ah battery from Parkside costs the same as the 15 cells you need to build this.

[@lexpee]

Wow What a good idea. For me is 4 amp batteries more than enough. This is good for heavy machines such as a 20V circular saw.

[@sasasvalina3098]

Awesome job, thanks for sharing.

[@stanislavakoseva2321]

The performance 8ah battery was 25 euro in the Belgium lidl recently. I got two of those, but this looks nice too

[@adem335i8]

Ah nog een belg😅

[@danielk7251]

25 euro... And on Poland its note less than 80:(

[@erikvisser6709]

Nu weer 70 🥲

[@koelling]

also in germany in december last year

[@TheRedstonelabz1]

Heb er met de nieuwjaarskorting ook lekker 2 gekocht 😂 ook een klopboor en nietjes schieter voor 25 euro. Was een topmoment 😂

[@elbieto]

Hello from the creator of the STL file Great video!!

[@ARMTechHomemade]

Thanks for STL file. It's realy useful thing. good job

[@MrGodsking]

@@ARMTechHomemade please can you make one for me,i dont mind paying

[@ARMTechHomemade]

@@MrGodsking where are you from ?

[@panossklap8692]

​@@ARMTechHomemade can you send me the 3d printer files?

[@KoRtExXx]

Hi! Can you please make one for 20 cells? 5s 4p

[@Aussiem8e]

Awesome work! 👌

[@FixitEasyDIY]

Nice video. Thank you brother 🙏

[@cristiannicolini134]

Molto bravo complimenti 🎉

[@hectormendoza4158]

Exelente trabajó!

[@Zzzz-zj7ni]

Hi, peso batteria 9ah... About the weight of 9ah battery? Regards saluti

[@Edmorbus]

Good work Thanks for sharing

[@oganesgrigoryan889]

Bombaaaa

[@giuseppezaza6985]

good project but how is possible to use the BMS board of 2A battery to control new battery of 9A?

[@RuiBentoAlves]

hi, Yes, it is possible and safe. He just added 2 cells in parallel to each of the original cells. Originally it had 5 cells connected in series (5s, 1p). Therefore, we had to add 10 more, leaving 15 cells in the end (5s, 3p) hope to be helpful cheers

[@LordAnubis0909]

did you try it under load. for grinder or something like that wich uses 4Ah? can it run havey load tools?

[@ARMTechHomemade]

Yes of course, i use it with my every parkside tools, never have a problem.

[@aldopezzilli8491]

bel lavoro. quale modello di stampante 3d usi, mi sembra che funziona molto bene. volevo comperarne una ma non so quale comperare grazie👍

[@paolopa2722]

ender 3 pro

[@VallGowrylo]

Kup sobie Creality K1C jeśli nie masz doświadczenia z drukowaniem 3D. Ona sama drukuje. To proste z tą drukarką. Około 500 Euro.

[@Lydr1993cz]

How much it is to make it that way ?

[@jussifabre3779]

Looks good

[@zynlycl]

Stl for the old parkside battery if you will update for new one will be amazing

[@SavageThrone]

Lavner!

[@rufus6062]

with this BMS its a bad balance . Use a specifical BMS Thanks .

[@VallGowrylo]

Co za bzdury.

[@vuvantuan6932]

Very nice

[@slothmandela]

Incredible

[@KoRtExXx]

Does this board have bms, auto balancing cells?

[@sebastiansabou6681]

No, only new model (and smart) batteries from Parkside have

[@saimon1409]

Hi, great job :-) Could you give a link to the file stl. for 3D printing that blue or black solder tin holder you have in the video? Thank you very much. I subscribed to your videos 🙂

[@ARMTechHomemade]

Hello. Thank you. Here is the stl file link for battery: www.thingiverse.com/thing:4688455

[@ARMTechHomemade]

You can find many interesting free models for solder tin holder in this site: www.thingiverse.com

[@saimon1409]

@@ARMTechHomemade Thank you, but which one do you have?

[@ARMTechHomemade]

​@@saimon1409 www.thingiverse.com/thing:5808156

[@francobiondini9253]

Con quale software hai fatto il progetto ?

[@ARMTechHomemade]

questi non sono i miei progetti, i file sono stati scaricati dal sito. collegamento nella descrizione

[@philippebourdais]

Fantastic job. Got all the pieces, weld all the batteries and everything seems to work OK. Used the new pack on the driller and on the new grinder. But It seems impossible to load the battery pack. The charger red light turn to green after a few seconds. I tried 2.4A, 3.5A and 4.5A parkside chargers. Any ideas what could have gone wrong?

[@sebastiansabou6681]

One of the accumulators (actually one of the groups of 3 cells in parallel) is not charged correctly. BMS is not balanced (cell charge equalization) and therefore all batteries are not charged evenly. You should charge each group of 3 cells separately and check afterwards if the charging for entire battery pack works.

[@TheKennyno]

Same problem here, do you fixed it? Thank you! Charger stop to charge at 19.5V

[@moenaghedi8257]

the initial battery pack is not the version with battery balancing, correct?

[@ARMTechHomemade]

Yes, you're right, it's old no balancing version. For the moment there are no any problem.

[@panossklap8692]

​@@ARMTechHomemade can i have the files for the 3d printer?

[@VallGowrylo]

SUPER!

[@gsteinhauer1161]

Nice ❤

[@tuncaysen5357]

harika

[@cristobalsigcha6333]

Hola en hora buena por lo que enseñas de la batera disculpa me puedes ayudar con el PDF para imprimir en 3d por favor o donde puedo comprar el prolongador de la aja de la batería por favor gracias

[@harisrajtimaniya8810]

Wow 🎉

[@silverify]

you need to choose right type cells not any.. high current one.. not for laptop or similar.. they are not same..

[@ARMTechHomemade]

i know. the parkside battery is 20A 2000mAh i shoose 30A 3300mAh battery. it's better

[@mekkertroniker2002]

What is with a 25v akku for more power?

[@bohumilspulak1060]

A co tavná pojistka, není poněkud slabá?

[@VallGowrylo]

Prąd jest ten sam. Zwiększa się pojemność baterii.

[@nayanjagirdar8408]

👌👍

[@igotbricotools2035]

👏👏👏👍

[@eziusss]

Battery for parkside lifetime. Without charging it second time :D

[@lexb]

Есть такой анекдот. Умирает старый мужик и жалуется близким, я всю жизнь прожил неправильно. В гостях клал в чай три ложки сахара, а дома одну. А люблю чай с двумя. Имхо для того инструмента аккуму нужны с 10 ячейками.

[@ARMTechHomemade]

Нужно для того чтобы каждый 20 мин не ставить на зарядку, это же просто.

[@karloft]

Илон Маск спит Karanq uxarkenq toshaki axpers Maksikin🤣

[@monterekfx]

Super projekt!

[@cliquetfabrice505]

Où tu trouves les batteries

[@ARMTechHomemade]

lien dans la description

[@ivanmarkovitch9916]

Прівет можете переслать файл на 3д печать

[@manuelstupu4295]

That crappie cheap plastic will only hold until first time you drop your tool. I have quite a few cracked and taped batteries and they all have a thicker plastic.

[@frankpost4901]

Ciao sei un grande!!!!!!!! E’ possibile avere il file stl?….

[@ARMTechHomemade]

stl file in description

[@jakob1409]

Wo kann man Austern kaufen

[@koelling]

i need a 20ah battery pack ❤😮

[@VallGowrylo]

Kup taki do samochodu. Varta.

[@myversionofthis]

Uau!

[@InVunter]

Pretty cool home made bomb. Using the same BMS for a way larger battery, it's going to work for longer periods, believe in your self

[@ARMTechHomemade]

I use it 1 years ago and i never got a problem.

[@juanantonio2827]

Es mucho más barato comprarlas en Lidl.😮

[@teoluksic1016]

For me it's not charging to full potential...the bms still thinks it's 2ah, and it charges like thet is 2ah....you need bms for higher ah ...for me not working...

[@howabout2138]

Bms doesnt calculate capacitt, it chatges batteries until they're at certain voltage

[@emilehoffmann]

That is not how a bms works😂

[@squupa1207]

@@emilehoffmann who do you answer?

[@airbornesoldier8104]

WHY !

[@dawiddawid835]

Pytanie tylko po co komu do tego badziewia taka bateria?

[@VallGowrylo]

Co za durne pytanie. Jak wiercę na dachu 40 otworów młotem udarowym na aku, to nie muszę schodzić po 10 otworach na parter żeby naładować aku. To aku jest do ciężkich prac szlifierką, lub wiertarką. Nie do wkręcenia 3 śrubek w deskę.

[@davey2k12]

Nice just add usb and a power meter just for good measure Wheres these Bluetooth battery's at they still sell the crap ones 😂

[@mustafae.6719]

Warum macht man sowas? Der Akku ist doch viel zu schwer. Wie soll man bitte so arbeiten?

[@darkfrei2]

4 Ah statt 2 Ah wird genug

[@upapantu7179]

Use the same BMS? Hahahha....

[@ARMTechHomemade]

What's the problem ?

[@charlottewilliamcover3568]

Absolutely no pb using same BMS because it take care of voltage, not intensity.

[@zynlycl]

Voltage ? Same 20v what’s problem ? Bms amperage for the machine not for the battery

[@jarotv5249]

Nie 9Ah tylko 8ah

[@moskil2]

Its 9,9Ah. He use pack 5S3P with 3300mah per cell that mean its 3x3300mah=9900mah, about ~20V and 0,2kWh

[@Manuel9x9]

It´s pretty cheaper to buy parkside 8ah pack

[@skyilah]

too bad you're forgetting not everyone has a 3d printer

[@mwint1982]

You can order printed parts for cheap if u have the files

[@panossklap8692]

Can you please send me the files for the 3d printer i want to make a battery like this

[@francobiondini9253]

Li vendi i file X la shell?